android 彩信 apn 切换,android学习笔记2 彩信APN切换流程（framework）

TransactionService之前的流程比较简单不在赘述，现在主要理清下从TransactionService到framework的流程。

首先会走到TransactionService的onStartCommand，在此函数中会对当前网络状态进行判断，然后调用到launchTransaction，如果此时网络不可用，会弹出toast，否则就向自己的handler发送EVENT_TRANSACTION_REQUEST。

Handler收到EVENT_TRANSACTION_REQUEST消息后，根据不同的transactionType对data进行不同的处理，我们用的是SEND_TRANSACTION，所以创建了transaction = newSendTransaction，紧接着调用processTransaction，开始进行transaction。

这里就到了关键的函数----beginMmsConnectivity，会根据此函数的返回值来进行下一步的操作，如果是APN_REQUEST_STARTED，则会把当前的MMS放到等待队列里，直到对应的APNready之后才会发送。

beginMmsConnectivity 会调到connectivityservice的startUsingNetworkFeature，下面重点看下这个函数。

public intstartUsingNetworkFeature(int networkType, Stringfeature,              // networkType这里我们是0，也就是TYPE_MOBILE，feature 是 enablemms1

IBinderbinder) {

…….

if(networkType == ConnectivityManager.TYPE_MOBILE) {

//if type is MMS,continue setup data call

Slog.d(TAG, "if type is MMS,continue setup data call");

if (!getMobileDataEnabledByPhoneId(getPhoneIdByFeature(feature)) &&

!(feature.indexOf(Phone.FEATURE_ENABLE_MMS)!=-1)) {

//if (!getMobileDataEnabledByPhoneId(getPhoneIdByFeature(feature))) {

if (DBG) Slog.d(TAG, "requested special network with data disabled - rejected");

return Phone.APN_TYPE_NOT_AVAILABLE;

}   if (TextUtils.equals(feature, Phone.FEATURE_ENABLE_DM)) {

usedNetworkType = ConnectivityManager.TYPE_MOBILE_DM;

} else if (TextUtils.equals(feature.substring(0,Phone.FEATURE_ENABLE_MMS.length()), Phone.FEATURE_ENABLE_MMS)){       //这里判断feature的前几位是不是enablemms

skipAvailableCheck = true;

usedNetworkType =ConnectivityManager.getMmsTypeByPhoneId(getPhoneIdByFeature(feature));// 将usedNetworkType赋值为11，即TYPE_MOBILE_DM+1

/* yuqing :if send sms with sim2 ,usedNetworkType=TYPE_MOBILE_DM+1=11 */

} else if (TextUtils.equals(feature, Phone.FEATURE_ENABLE_SUPL)) {

usedNetworkType = ConnectivityManager.TYPE_MOBILE_SUPL;

} else if (TextUtils.equals(feature, Phone.FEATURE_ENABLE_DUN)) {

usedNetworkType = ConnectivityManager.TYPE_MOBILE_DUN;

} else if (TextUtils.equals(feature, Phone.FEATURE_ENABLE_HIPRI)) {

usedNetworkType = ConnectivityManager.TYPE_MOBILE_HIPRI;

}

}

NetworkStateTracker network = mNetTrackers[usedNetworkType]; //根据usedNetworkType来选取对应的NetworkStateTracker

if(DBG) Slog.d(TAG, "network = " + network);

if (network != null) {

if (usedNetworkType != networkType){              //传入的是0，现在NetworkStateTracker是11

Integer currentPid = new Integer(getCallingPid());

NetworkStateTracker radio = mNetTrackers[networkType];

NetworkInfo ni = network.getNetworkInfo();

// TODO: using serviceState to check is better for Msms

if (!skipAvailableCheck && ni.isAvailable() == false) {

if (DBG) Slog.d(TAG, "special network not available");

return Phone.APN_TYPE_NOT_AVAILABLE;

}              synchronized(this) {

mFeatureUsers.add(f);

if (!mNetRequestersPids[usedNetworkType].contains(currentPid)) {

// this gets used for per-pid dns whenconnected

mNetRequestersPids[usedNetworkType].add(currentPid);

}

}

mHandler.sendMessageDelayed(mHandler.obtainMessage(EVENT_RESTORE_DEFAULT_NETWORK,

f), getRestoreDefaultNetworkDelay());

if (DBG) Slog.d(TAG,"ni.isConnectedOrConnecting()="+ni.isConnectedOrConnecting()); //当卡2的数据连接还没起来的时候，这里是disconnect

if ((ni.isConnectedOrConnecting() == true) &&

!network.isTeardownRequested()) {

if (ni.isConnected() == true) {

// add the pid-specific dns

handleDnsConfigurationChange(networkType);

if (DBG) Slog.d(TAG, "special network already active");

return Phone.APN_ALREADY_ACTIVE;

}

if (DBG) Slog.d(TAG, "special network already connecting");

return Phone.APN_REQUEST_STARTED;

}

// check if the radio in play can make another contact

// assume if cannot fornow               if (!isAlreadyConnecting) {

if (DBG) Slog.d(TAG, "reconnecting to special network");

if(!network.reconnect()){                // 重要函数，实际调用的是MobileDataStateTracker.reconnect()，下面分析

//if the mms apn is not available, remove the request from mMmsFeatureRequest

//if not remove it, the othe mms send request will be pending.

if (isMmsFeature(feature) && mMmsFeatureRequest.size() > 0) {

mMmsFeatureRequest.remove(0);

}

return Phone.APN_TYPE_NOT_AVAILABLE;

}

} else {

if (DBG) Slog.d(TAG, "already reconnecting to special network");

}

return Phone.APN_REQUEST_STARTED;

} else{               synchronized(this) {

mFeatureUsers.add(f);

}

mHandler.sendMessageDelayed(mHandler.obtainMessage(EVENT_RESTORE_DEFAULT_NETWORK,

f), getRestoreDefaultNetworkDelay());

return network.startUsingNetworkFeature(feature,

getCallingPid(), getCallingUid());

}

}

return Phone.APN_TYPE_NOT_AVAILABLE;

}

MobileDataStateTracker.reconnect()中会调用setEnableApn (mApnType,true)，此时的apntype是已经转换好了的， mApnType =networkTypeToApnType(netType);

代码如下，我们在创建的时候，选择的是第11个即mNetTrackers[usedNetworkType]，也就是说netype =11，但是经过这个函数转换后神奇的变成了MMS，不知是何用意，暂且先不管。

public static StringnetworkTypeToApnType(int netType) {

switch(netType) {

case ConnectivityManager.TYPE_MOBILE:

return Phone.APN_TYPE_DEFAULT;  // TODO - use just one of these

case ConnectivityManager.TYPE_MOBILE_MMS:

return Phone.APN_TYPE_MMS;

case ConnectivityManager.TYPE_MOBILE_SUPL:

return Phone.APN_TYPE_SUPL;

case ConnectivityManager.TYPE_MOBILE_DUN:

return Phone.APN_TYPE_DUN;

case ConnectivityManager.TYPE_MOBILE_HIPRI:

return Phone.APN_TYPE_HIPRI;

case ConnectivityManager.TYPE_MOBILE_DM:

return Phone.APN_TYPE_DM;

default:

// Msms MMS netType @zha

if (ConnectivityManager.isNetworkTypeValid(netType)) {

return Phone.APN_TYPE_MMS;

} else {

Log.e(TAG, "Error mapping networkType " + netType + " toapnType.");

return null;

}

}

}

setEnableApn调用了mPhoneService.enableApnType(apnType)，即DataConnectionTracker.enableApnType,返回值就是此函数中给出的，此函数中又调用了apnTypeToId来转换ID，

转换为APN_MMS_ID，紧接着调用setEnabled，发送EVENT_ENABLE_NEW_APN给自己的handler，回调到onEnableApn--àonEnableNewApn()

调用GsmDataConnectionTracker的onEnableNewApn，这里会调用       cleanUpConnection(true, Phone.REASON_APN_SWITCHED);disconnect当前APN，

停止netstate的poll，也就是为什么我们看到E的图标没有了。

调用MsmsGsmDataConnectionTracker的enableApnType，到MsmsGsmDataConnectionTrackerProxy.onEnableNewApn,此函数就是最终gprsattach的地方。

public staticvoid onEnableNewApn(int phoneId) {

synchronized (sInstance) {

log("onEnableNewApn(" + phoneId + ") activePhoneId:" +sActivePhoneId);

if (phoneId == INVALID_PHONE_ID){                       //传入PHONEID不正确

log("phoneId is invalid,onEnableNewApn out!!!");

return;

}

sRequestConnectPhoneId = phoneId;

sRequestPhoneIdBeforeVoiceCallEnd = sRequestConnectPhoneId;

if (sActivePhoneId != INVALID_PHONE_ID) {

if(sRequestConnectPhoneId!=sActivePhoneId){             //当前APN存在，且phoneid和请求值不等，即双卡之间切换时

if(sTracker[sActivePhoneId].isAllPdpDisconnectDone()) { //PDP连接全部断开时，switchphone E图标消失，否则强制断开连接。

checkAndSwitchPhone(sActivePhoneId, null);

} else {

sTracker[sActivePhoneId].cleanupConnections(true,

Phone.REASON_DATA_DISABLED);

}

}else{

sTracker[sActivePhoneId].onEnableNewApnInternal();

}

} else {   //当前activephone不存在，

if(sTracker[sRequestConnectPhoneId].getCurrentGprsState() ==ServiceState.STATE_IN_SERVICE) { //如果GPRS inservice，发起数据连接

sTracker[sRequestConnectPhoneId].trySetupData(Phone.REASON_APN_SWITCHED);

sActivePhoneId = sRequestConnectPhoneId;

} else {

sTracker[sRequestConnectPhoneId].mGsmPhone.mCM.setGprsAttach(null);//notinservice ，则发起gprsattach

sActivePhoneId = sRequestConnectPhoneId;

}

}

if(phoneId == sActivePhoneId){ //如果传入值和当前active值相同

// do not need to switch phone, so we initialize sRequestConnectPhoneId.

sRequestConnectPhoneId=INVALID_PHONE_ID;

}

log("onEnableNewApn out");

}

}

如果这次setapnenable没有成功(返回APN_REQUEST_STARTED)，TransactionService会将当前的Transaction放入pending列表，

并侦听EVENT_DATA_STATE_CHANGED事件，在合适的时候重新发起，调用processPendingTransaction处理pending的Transaction。