stm32白屏_新人求助！！stm32板子外接TFT LCD一直白屏，不读写程序

#include "stm32f10x.h"

#include "bsp_ili9341_lcd.h"

//#include "bsp_usart1.h"

extern void Lcd_Delay(__IO uint32_t nCount);

uint32_t n;

int main(void)

{

LCD_Init();

//Lcd_Delay(0xAFFf>>4);

LCD_Clear(0, 0, 240, 320, YELLOW);

LCD_DispChar(60, 60, 'A', RED);

LCD_DispStr(10, 10, (uint8_t *)"This is a lcd demo to display ascii", RED);

LCD_DispStr(40, 100, (uint8_t *)"count:", RED);

for( n=0; n<500000; n++ )

{

LCD_DisNum(100, 100, n, RED);

Lcd_Delay(0xAFFf>>4);

}

while( 1 );

}

#include "bsp_ili9341_lcd.h"

#include "ascii.h"

#define DEBUG_DELAY()

void Lcd_Delay(__IO uint32_t nCount)

{

for(; nCount != 0; nCount--);

}

void LCD_GPIO_Config(void)

{

GPIO_InitTypeDef GPIO_InitStructure;

RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);

RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE

| RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOG

| RCC_APB2Periph_GPIOF , ENABLE);

GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;

GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;

GPIO_Init(GPIOB, &GPIO_InitStructure);

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 ;

GPIO_Init(GPIOG, &GPIO_InitStructure);

/*LCD引脚,FSMC-D0~D15: PD 14 15 0 1,PE 7 8 9 10 11 12 13 14 15,PD 8 9 10*/

GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;

GPIO_InitStructure.GPIO_Mode =  GPIO_Mode_AF_PP;

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 |

GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15;

GPIO_Init(GPIOD, &GPIO_