matlab 分裂合并后图像不出,基于MATLAB的图像分割算法研究

摘要

本文从原理和应用效果上对经典的图像分割方法如边缘检测、阈值分割技术和区域增长等进行了分析。对梯度算法中的Roberts算子、Sobel算子、Prewitt算子、拉普拉斯(Laplacian)算子、LoG(Laplacian-Gauss)算子、坎尼(Canny)算子的分割步骤、分割方式、分割准则相互比较可以看出根据坎尼(Canny)边缘算子的3个准则得出的边缘检测结果最满意。而阈值分割技术的关键在于阈值的确定,只有阈值确定好了才能有效的划分物体与背景,但这种方法只对于那些灰度分布明显,背景与物体差别大的图像的分割效果才明显。区域增长的基本思想是将具有相似性质的像素集合起来构成新区域。与此同时本文还分析了图像分割技术研究的方向。

关键词:图像处理图像分割

Abstract

This article analyses the application effect to the classics image segmentation method like the edge examination, territory value division technology, and the region growth and so on.For comparing the Roberts operator, Sobel operator, Prewitt operator, the operator of Laplacian and the operator of LoG(Laplacian-Gauss),Canny operator in gradient algorithm,the step, the way and the standard of the image segmentation,we can find out the three standard of Canny edge operator the edge detection result of reaching most satisfy. And the key point of threshold segmentation lie in fixing the threshold value, it is good to have only threshold value to determine it then can be effective to divide object and background,but this kind of method is good to those gray scales,the big difference image effect between the background and obiect. The basic idea of area is to form the new region from similar nature.And also, this paper analyses the research direction of image segmentation technology at the same time.

Key words: image processing image segmentation operator

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
以下是基于区域分裂合并图像分割MATLAB代码: ```matlab % 读取图像 I = imread('image.jpg'); figure;imshow(I);title('原始图像'); % 将图像转化为灰度图像 Igray = rgb2gray(I); % 初始化区域 labels = zeros(size(Igray)); regionNum = 1; % 初始化分割参数 minRegionSize = 100; maxRegionSize = 500; threshold = 10; % 区域分割 while (1) % 计算每个区域的平均灰度值 regionMeans = zeros(regionNum, 1); for i = 1:regionNum [r, c] = find(labels == i); regionMeans(i) = mean(Igray(sub2ind(size(Igray), r, c))); end % 计算每个区域与相邻区域的平均灰度值差 regionDiffs = zeros(regionNum, regionNum); for i = 1:regionNum-1 for j = i+1:regionNum [r_i, c_i] = find(labels == i); [r_j, c_j] = find(labels == j); dist = pdist2([mean(r_i), mean(c_i)], [mean(r_j), mean(c_j)]); if (dist <= sqrt(2)) regionDiffs(i,j) = abs(regionMeans(i) - regionMeans(j)); end end end % 找到最大的平均灰度值差 maxDiff = max(max(regionDiffs)); if (maxDiff <= threshold) break; end % 找到差值最大的区域并进行分裂 [region1, region2] = find(regionDiffs == maxDiff); [r_1, c_1] = find(labels == region1); [r_2, c_2] = find(labels == region2); labels(sub2ind(size(labels), r_1, c_1)) = regionNum+1; labels(sub2ind(size(labels), r_2, c_2)) = regionNum+2; regionNum = regionNum + 2; end % 合并小区域 for i = 1:regionNum [r, c] = find(labels == i); if (length(r) < minRegionSize || length(r) > maxRegionSize) labels(sub2ind(size(labels), r, c)) = 0; end end % 显示分割结果 figure;imshow(label2rgb(labels));title('分割结果'); ``` 在代码中,我们首先读取图像,并将其转换为灰度图像。然后,我们初始化区域,并设置分割参数。接下来,我们进行区域分割,直到满足停止条件。在每一次分割中,我们计算每个区域的平均灰度值以及每个区域与相邻区域的平均灰度值差,找到差值最大的区域并进行分裂。最后,我们合并小区域,并显示分割结果。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值