有没有办法通过软件识别你的记忆速度?我在Fedora 9上,希望找到我目前在那里的DIMM的速度.
我试过’lshw’,但它没有显示速度.我知道主板支持3种不同的速度,但我不知道那里有什么,不想关掉盒子.
有任何想法吗?
谢谢,
编辑:根据dmidecode,我发现ram为’30 ns’.如果主板仅支持400,533,667 Mhz RAM,它怎么能是33 MHz?
编辑2:还有其他工具吗?
编辑3:我实际上投降并最终停电几分钟并打开案件.事实证明它是667 MhZ – 这个型号:http://www.directron.com/rm12864aa667.html.尽管通过软件无法确定它是667,但我已经将HD的答案标记为正确的答案,因为这似乎是这项工作的最佳工具.
这是demidecode – type memory的输出
# dmidecode 2.7
SMBIOS 2.4 present.
Handle 0x0008,DMI type 5,20 bytes.
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0009
0x000A
Enabled Error Correcting Capabilities:
None
Handle 0x0009,DMI type 6,12 bytes.
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 9 11
Current Speed: 30 ns
Type: Unknown FPM Parity SDRAM
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A,12 bytes.
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 9 11
Current Speed: 30 ns
Type: Unknown FPM Parity SDRAM
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK
Handle 0x002F,DMI type 16,15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0031,DMI type 17,27 bytes.
Memory Device
Array Handle: 0x002F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x0033,27 bytes.
Memory Device
Array Handle: 0x002F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1