Oracle Weblogic 之---字符安装全记录
系统平台：
操作系统： RedHat EL55
软 件： Oracle Weblogic 10.3.6
Oracle 软件： Oracle 11gR2
一、下载Weblogic 软件(Oracle官方网站)
二、上传安装包到Linux server
1)创建bea group 和 weblogic 用户
[root@bjsrv soft]# groupadd -g 550 bea
[root@bjsrv soft]# useradd -g bea -u 550 weblogic
[root@bjsrv soft]# passwd weblogic
Changing password for user weblogic.
New UNIX password:
BAD PASSWORD: it is based on a dictionary word
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
2)安装文件配置可执行权限
[root@bjsrv soft]# chmod +x wls1036_linux32.bin
[root@bjsrv soft]# ls -l
-rwxr-xr-x 1 oracle oinstall 871091023 Mar 25 15:36 wls1036_linux32.bin
3)创建安装weblogic目录
[root@bjsrv ~]# mkdir -p /u01/weblogic
[root@bjsrv ~]# chown -R weblogic:bea /u01/weblogic/
[root@bjsrv ~]#
三、安装weblogic
[root@bjsrv soft]# ./wls1036_linux32.bin
Extracting 0%....................................................................................................100%
Unable to instantiate GUI, defaulting to console mode.
Welcome:
--------
This installer will guide you through the installation of WebLogic 10.3.6.0. Type "Next" or enter to proceed
to the next prompt. If you want to change data entered previously, type "Previous". You may quit the
installer at any time by typing "Exit".
Enter [Exit][Next]>next
Enter new Middleware Home OR [Exit][Previous][Next]> /u01/weblogic
Choose Middleware Home Directory:
---------------------------------
"Middleware Home" = [/u01/weblogic]
Use above value or select another option:
1 - Enter new Middleware Home
2 - Change to default [/root/Oracle/Middleware]
Enter option number to select OR [Exit][Previous][Next]> next
Register for Security Updates:
------------------------------
Provide your email address for security updates and to initiate configuration manager.
1|Proxy Server:[]
2|Proxy Port:[500]
3|Proxy Username:[]
4|Proxy Password:[]
5|Remain uninformed:[yes]
Enter index number to select OR [Exit][Previous][Next]>
Register for Security Updates:
------------------------------
Provide your email address for security updates and to initiate configuration manager.
1|Proxy Server:[]
2|Proxy Port:[500]
3|Proxy Username:[]
4|Proxy Password:[]
5|Remain uninformed:[yes]
Enter index number to select OR [Exit][Previous][Next]> next
Choose Install Type:
--------------------
Select the type of installation you wish to perform.
->1|Typical
| Install the following product(s) and component(s):
| - WebLogic Server
| - Oracle Coherence
2|Custom
| Choose software products and components to install and perform optional configuration.
Enter index number to select OR [Exit][Previous][Next]> next
Choose Product Installation Directories:
----------------------------------------
Middleware Home Directory: [/u01/weblogic]
Product Installation Directories:
1|WebLogic Server: [/u01/weblogic/wlserver_10.3]
2|Oracle Coherence: [/u01/weblogic/coherence_3.7]
Enter index number to select OR [Exit][Previous][Next]> next
The following Products and JDKs will be installed:
--------------------------------------------------
WebLogic Platform 10.3.6.0
|_____WebLogic Server
| |_____Core Application Server
| |_____Administration Console
| |_____Configuration Wizard and Upgrade Framework
| |_____Web 2.0 HTTP Pub-Sub Server
| |_____WebLogic SCA
| |_____WebLogic JDBC Drivers
| |_____Third Party JDBC Drivers
| |_____WebLogic Server Clients
| |_____WebLogic Web Server Plugins
| |_____UDDI and Xquery Support
| |_____Evaluation Database
|_____Oracle Coherence
| |_____Coherence Product Files
|_____JDKs
|_____SUN SDK 1.6.0_29
|_____Oracle JRockit 1.6.0_29 SDK
*Estimated size of installation: 1,276.0 MB
Enter [Exit][Previous][Next]>
Mar 25, 2014 3:49:59 PM java.util.prefs.FileSystemPreferences$2 run
INFO: Created user preferences directory.
Installing files..
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
Installing JDK....
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
Performing String Substitutions...
Configuring OCM...
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
Creating Domains...
Installation Complete
Congratulations! Installation is complete.
Press [Enter] to continue or type [Exit]>
四、配置Weblogic domain
[root@bjsrv weblogic]# find ./ -name "config.sh"
./wlserver_10.3/common/bin/config.sh
[root@bjsrv weblogic]# ls
coherence_3.7 jdk160_29 logs ocm.rsp registry.xml wlserver_10.3
domain-registry.xml jrockit_160_29_D1.2.0-10 modules registry.dat utils
[root@bjsrv weblogic]# cd wlserver_10.3/
[root@bjsrv wlserver_10.3]# ls
common inventory L10N server sip uninstall
[root@bjsrv wlserver_10.3]# cd common/
[root@bjsrv common]# ls
bin deployable-libraries derby eval lib nodemanager quickstart templates wlst
[root@bjsrv common]# cd bin
[root@bjsrv bin]# ls
commEnv.sh config.sh setPatchEnv.sh startManagedWebLogic.sh unpack.sh wlscontrol.sh wlst.sh
config_builder.sh pack.sh startDerby.sh stopDerby.sh upgrade.sh wlsifconfig.sh
[root@bjsrv bin]# ./config.sh
Unable to instantiate GUI, defaulting to console mode.
Welcome:
--------
Choose between creating and extending a domain. Based on your selection, the Configuration Wizard guides
you through the steps to generate a new or extend an existing domain.
->1|Create a new WebLogic domain
| Create a WebLogic domain in your projects directory.
2|Extend an existing WebLogic domain
| Use this option to add new components to an existing domain and modify configuration settings.
Enter index number to select OR [Exit][Next] next
Select Domain Source:
---------------------
Select the source from which the domain will be created. You can create the domain by selecting from the
required components or by selecting from a list of existing domain templates.
->1|Choose Weblogic Platform components
| You can choose the Weblogic component(s) that you want supported in your domain.
2|Choose custom template
| Choose this option if you want to use an existing template. This could be a custom created template |using the Template Builder.
Enter index number to select OR [Exit][Previous][Next]> next
Application Template Selection:
-------------------------------
Available Templates
|_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
|_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
|_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
|_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> next
Edit Domain Information:
------------------------
| Name | Value |
_|________|_____________|
1| *Name: | base_domain |
Enter value for "Name" OR [Exit][Previous][Next]> bea
Edit Domain Information:
------------------------
| Name | Value |
_|________|_______|
1| *Name: | bea |
Use above value or select another option:
1 - Modify "Name"
2 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]> next
Select the target domain directory for this domain:
---------------------------------------------------
"Target Location" = [Enter new value or use default "/u01/weblogic/user_projects/domains"]
Enter new Target Location OR [Exit][Previous][Next]> next
Configure Administrator User Name and Password:
-----------------------------------------------
Create a user to be assigned to the Administrator role. This user is the default administrator used to
start development mode servers.
| Name | Value |
_|_________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | |
3| *Confirm user password: | |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify "Name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
Enter option number to select OR [Exit][Previous][Next]> 2
Configure Administrator User Name and Password:
-----------------------------------------------
Create a user to be assigned to the Administrator role. This user is the default administrator used to
start development mode servers.
"*User password:" = []
Enter new *User password: OR [Exit][Reset][Accept]>
Configure Administrator User Name and Password:
-----------------------------------------------
Create a user to be assigned to the Administrator role. This user is the default administrator used to
start development mode servers.
| Name | Value |
_|_________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | ****** |
3| *Confirm user password: | |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify "Name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]> 3
Configure Administrator User Name and Password:
-----------------------------------------------
Create a user to be assigned to the Administrator role. This user is the default administrator used to
start development mode servers.
"*Confirm user password:" = []
Enter new *Confirm user password: OR [Exit][Reset][Accept]>
Configure Administrator User Name and Password:
-----------------------------------------------
Create a user to be assigned to the Administrator role. This user is the default administrator used to
start development mode servers.
| Name | Value |
_|_________________________|_________________________________________|
1| *Name: | weblogic |
2| *User password: | ****** |
3| *Confirm user password: | ****** |
4| Description: | This user is the default administrator. |
Use above value or select another option:
1 - Modify "Name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
Enter option number to select OR [Exit][Previous][Next]>
注意： password 最少8位
Domain Mode Configuration:
--------------------------
Enable Development or Production Mode for this domain.
->1|Development Mode
2|Production Mode
Enter index number to select OR [Exit][Previous][Next]> 2
Java SDK Selection:
-------------------
->1|JRockit SDK 1.6.0_29 @ /u01/weblogic/jrockit_160_29_D1.2.0-10
2|Sun SDK 1.6.0_29 @ /u01/weblogic/jdk160_29
3|Other Java SDK
Enter index number to select OR [Exit][Previous][Next]> next
Select Optional Configuration:
------------------------------
1|Administration Server [ ]
2|Managed Servers, Clusters and Machines [ ]
3|RDBMS Security Store [ ]
Enter index number to select OR [Exit][Previous][Next]> 1
Select Optional Configuration:
------------------------------
1|Administration Server [x]
2|Managed Servers, Clusters and Machines [ ]
3|RDBMS Security Store [ ]
Enter index number to select OR [Exit][Previous][Next]> next
Configure the Administration Server:
------------------------------------
Each WebLogic Server domain must have one Administration Server. The Administration Server is used to
perform administrative tasks.
| Name | Value |
_|__________________|_____________________|
1| *Name: | AdminServer |
2| *Listen address: | All Local Addresses |
3| Listen port: | 7001 |
4| SSL listen port: | N/A |
5| SSL enabled: | false |
Use above value or select another option:
1 - Modify "Name"
2 - Modify "Listen address"
3 - Modify "Listen port"
4 - Modify "SSL enabled"
Enter option number to select OR [Exit][Previous][Next]> next
Creating Domain...
0% 25% 50% 75% 100%
[------------|------------|------------|------------]
[***************************************************]
**** Domain Created Successfully! ****
[root@bjsrv bin]#
五、启动weblogic(通过domain 启动)
[root@bjsrv weblogic]# find ./ -name "bea"
./wlserver_10.3/server/lib/consoleapp/consolehelp/WEB-INF/classes/com/bea
./wlserver_10.3/server/lib/consoleapp/webapp/WEB-INF/src/com/bea
./user_projects/domains/bea
./utils/ccr/sysman/admin/scripts/bea
[root@bjsrv weblogic]# cd user_projects/domains/
[root@bjsrv domains]# ls
bea
[root@bjsrv domains]# cd bea
[root@bjsrv bea]# ls
autodeploy bin config console-ext fileRealm.properties init-info lib security startWebLogic.sh
[root@bjsrv bea]# ./startWebLogic.sh
.
JAVA Memory arguments: -Xms512m -Xmx512m
.
WLS Start Mode=Production
.
CLASSPATH=/u01/weblogic/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/weblogic/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/weblogic/jrockit_160_29_D1.2.0-10/lib/tools.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/weblogic/wlserver_10.3/server/lib/weblogic.jar:/u01/weblogic/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/weblogic/wlserver_10.3/server/lib/webservices.jar:/u01/weblogic/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/weblogic/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/weblogic/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/weblogic/wlserver_10.3/server/lib/xqrl.jar
.
PATH=/u01/weblogic/wlserver_10.3/server/bin:/u01/weblogic/modules/org.apache.ant_1.7.1/bin:/u01/weblogic/jrockit_160_29_D1.2.0-10/jre/bin:/u01/weblogic/jrockit_160_29_D1.2.0-10/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
.
***************************************************
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
***************************************************
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.0-79-146777-1.6.0_29-20111005-1807-linux-ia32, compiled mode)
Starting WLS with line:
/u01/weblogic/jrockit_160_29_D1.2.0-10/bin/java -jrockit -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=/u01/weblogic/wlserver_10.3 -Dwls.home=/u01/weblogic/wlserver_10.3/server -Dweblogic.home=/u01/weblogic/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/weblogic/patch_wls1036/profiles/default/sysext_manifest_classpath:/u01/weblogic/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server: (口令为配置domain时设置口令)
六、查看weblogic启动(port：7001)
[root@bjsrv ~]# netstat -an |grep 7001
tcp 0 0 fe80::201:2ff:fe03:405:7001 :::* LISTEN
tcp 0 0 ::ffff:192.168.8.245:7001 :::* LISTEN
tcp 0 0 fe80::fcff:ffff:feff:f:7001 :::* LISTEN
tcp 0 0 ::ffff:127.0.0.1:7001 :::* LISTEN
tcp 0 0 ::ffff:192.168.122.1:7001 :::* LISTEN
tcp 0 0 ::1:7001 :::* LISTEN
tcp 0 0 fe80::200:ff:fe00:0:7001 :::* LISTEN
[root@bjsrv ~]# netstat -an |grep :7001
tcp 0 0 fe80::201:2ff:fe03:405:7001 :::* LISTEN
tcp 0 0 ::ffff:192.168.8.245:7001 :::* LISTEN
tcp 0 0 fe80::fcff:ffff:feff:f:7001 :::* LISTEN
tcp 0 0 ::ffff:127.0.0.1:7001 :::* LISTEN
tcp 0 0 ::ffff:192.168.122.1:7001 :::* LISTEN
tcp 0 0 ::1:7001 :::* LISTEN
tcp 0 0 fe80::200:ff:fe00:0:7001 :::* LISTEN
[root@bjsrv ~]#
七、通过web 页面访问
至此，weblogic全部安装完成！
扫一扫
1051
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
