Linux修改内核出现可视化,修改 linux 内核启动 logo

系统环境:ubuntu 10.04 +x86

$ sudo apt-get install netpbm

$ pngtopnm loongson.png > loongson.pnm

说明:用来转换的图片必须为 png 格式,否则会有如下提示:

pngtopnm: input file not a PNG file

$ pnmquant 224 loongson.pnm > loongson224.pnm

pnmcolormap: making histogram...

pnmcolormap: 5854 colors found

pnmcolormap: choosing 224 colors...

pnmremap: 222 colors found in colormap

注意:此处 pnmquant 必须输出到另一个不同名的文件,否则会出现如下错误提示

eg:$ pnmquant 224 loongson.pnm > loongson.pnm

pnmcolormap: EOF / read error reading magic number

pnmcolormap failed, rc=256

$ pnmtoplainpnm loongson224.pnm > loongson224.ppm

然后用转换好的 loongson224.ppm 替换 kernel

/drivers/video/logo/logo_linux_clut224.ppm(最好先做好备份)

,然后删除同一目

录下的 logo_linux_clut224.c 文件,重新编译内核即可

$ cd /home/work/kenrel/linux26_3210/drivers/video/logo

$ mv logo_linux_clut224.ppm{,-bk}

$ cp /home/loongson/Dowload/loongson224.ppm ./

$ mv loongson224.ppm logo_linux_clut224.ppm

$ rm logo_linux_clut224.c

$ cd ../../../

$ make menuconfig  //在内核里面选上logo 支持

Device Drivers  --->[*]Graphics support  --->

[*] Bootup logo  --->

[*]   Standard black and white Linux logo

[*]   Standard 16-color Linux logo

[*]   Standard 224-color Linux logo

$ make