linux通过端口测试网速,【转】Linux下测试网速的工具

1.#  iptraf

-g   //这个最直观

2. iperf 　Iperf

是一个网络性能测试工具。Iperf可以测试最大TCP和UDP带宽性能。Iperf具有多种参数和UDP特性，可以根据需要调整。Iperf可以报告带宽，延迟抖动和数据包丢失

TCP:

server(pc):

iperf -s -i 1

client(ls1b):  iperf -t 20 -i 1 -c

192.168.1.167 (pc-ip)

UDP:

server(pc):

iperf  -u -s -i 1

client(ls1b): iperf -t 10 -i 1 -u -b

1000M  -c 192.168.1.90

3. #  ifconfig

-a

eth0:Link encap:Ethernet  HWaddr

00:1e:64:63:ab:fe

inet addr:192.168.3.103  Bcast:192.168.3.255

Mask:255.255.255.0

inet6 addr: fe80::21e:64ff:fe63:abfe/64

Scope:Link

UP BROADCAST RUNNING MULTICAST  MTU:1500

Metric:1

RX packets:70283 errors:0 dropped:0 overruns:0

frame:0

TX packets:46701 errors:0 dropped:0 overruns:0

carrier:0

collisions:0

txqueuelen:1000

RX bytes:73276012 (73.2 MB)  TX

bytes:6267375 (6.2 MB)

4. #  mii-tool -w -v

//更详细的用法 man mii-tool

5. ethtool是用来显示和更改网卡设置的工具 更详细的用法

man ethtool

# ethtool eth0

//显示网络端口设置功能

Settings for

eth0:

Supported ports: [ TP MII

]

Supported link modes:

10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

Supports

auto-negotiation: Yes

Advertised link

modes:  10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

Advertised

pause frame use: No

Advertised

auto-negotiation: Yes

Link partner advertised

link modes:  Not reported

Link partner

advertised pause frame use: No

Link partner

advertised auto-negotiation: No

Speed:

10Mb/s

Duplex:

Half

Port:

MII

PHYAD:

0

Transceiver:

internal

Auto-negotiation:

on

Supports Wake-on:

pumbg

Wake-on:

g

Current message level: 0x00000033

(51)

Link detected: no

#

ethtool -i eth0  //显示跟硬件相关的信息

driver:

r8169

version:

2.3LK-NAPI

firmware-version:

bus-info:

0000:05:00.0

6. # watch -n 1 "/sbin/ifconfig eth0 | grep

bytes"