1.Figure和Subplot
import numpy as np
import matplotlib.pyplot as plt
#创建一个Figure
fig = plt.figure()
#不能通过空figure绘图,必须使用add_subplot创建一个或多个subplot
#图像为2x2,第三个参数为当前选中的第几个
ax1 = fig.add_subplot(2, 2, 1)
ax2 = fig.add_subplot(2, 2, 2)
ax3 = fig.add_subplot(2, 2, 3)
#默认在最后一个subplot上绘制
#"k--"为线型选项,绘制黑色虚线
plt.plot(np.random.randn(50).cumsum(), "k--")
print(type(ax1))#
#直接调用它们的实例方法就可以在其他格子绘图
_ = ax1.hist(np.random.randn(100), bins=20, color="k", alpha=0.3)
ax2.scatter(np.arange(30), np.arange(30) + 3 * np.random.randn(30))
plt.show()
fig, axes = plt.subplots(2, 2, sharex=True, sharey=True)#创建一个新的Figure,并返回一个已创建subplot对象的NumPy数组
#可以索引axes[0,1],axes[0][1]
"""
plt.subplots的选项
nrows:subplot的行数
ncols:subplot的列数
sharex:所有subplot应该使用相同的x轴刻度(调节xlim将会影响所有subplot)
sharey:所有subplot应该使用相同的y轴刻度(调节ylim将会影响所有subplot)
subplot_kw:用于创建各subplot的关键字字典
**fig_kw:创建figure时其他关键字,如plt.subplots(2,2,figsize=(8,6))
"""
for i in range(2):
for j in range(2):
axes[i,j].hist(np.random.randn(500),bins=50, color="k",alpha=0.5)
#调整subplot周围间距
#plt.subplots_adjust(left=None,bottom=None,right=None,top=None,wspace=None,hspace=None)
plt.subplots_adjust(wspace=0, hspace=0)
plt.show()
2.颜色、标记和线型
#ax.plot(x,y,"g--")
#ax.plot(x, y, linestyle="--", color="g")
#plt.plot(np.random.randn(30).cumsum(), "ko--")
#plt.plot(np.random.randn(30).cumsum(), color="k", linestyle="dashed", marker="o")
#线型图中,非实际数据点默认是按线性方式插值的,可以通过drawstyle选项修改
data = np.random.randn(30).cumsum()
plt.plot(data, "k--", label="Defalt")
plt.plot(data, "k-", drawstyle="steps-post", label="steps-post")
plt.legend(loc="best")
3.刻度、标签和图例
xlim,xticks,xticklabels之类的方法。它们分别控制图表的范围、刻度位置、刻度标签等。
其使用方式有以下两种:
调用时不带参数,则返回当前参数值。plt.xlim()
调用时带参数,则设置参数值。plt.xlim([0,10])
这些方法对当前或最近创建的AxesSubplot起作用
对应在subplot对象上的两个方法,如ax.get_xlim和ax.set_xlim
3.1.设置标题、轴标签、刻度以及刻度标签
fig = plt.figure()
ax = fig.add_subplot(1,1,1)
ax.plot(np.random.randn(1000).cumsum())
#改变X轴的刻度,最简单的方法是使用set_xticks和set_xticklabels。
#前者告诉刻度放在数据范围中的哪些位置,默认情况下,这些位置是刻度标签,可以用set_xticklabels设置。
a=ax.set_xticks([0,250,500,750,1000])
b=ax.set_xticklabels(["one","two","three","four","five"],rotation=30,fontsize="small")
ax.set_xlabel("Stages")
plt.show()
3.2.添加图例(legend)、注解以及在Subplot上绘图
两种方式,最简单的是在添加subplot的时候传入label参数
fig = plt.figure()
ax = fig.add_subplot(1,1,1)
ax.plot(np.random.randn(1000).cumsum(), "k", label="one")
ax.plot(np.random.randn(1000).cumsum(), "k--", label="two")
ax.plot(np.random.randn(1000).cumsum(), "k.", label="three")
ax.legend(loc="best")
#loc表示将图例放在哪
#从图例中去除一个或多个元素,不传入label或label="_nolegend_"即可
#注解以及在Subplot上绘图
#注解可以通过text,arrow和annotate等函数进行添加。
#text可以将文本绘制在图标的指定坐标(x,y),还可以加上一些自定义格式
#ax.text(x ,y, "Hello world!",family="monosapce",fontsize=10)
plt.show()
3.3.将图表保存到文件
plt.savefig("filepath.svg")
plt.savefig("filepath.svg", dpi=400,bbox_inches="tight")
Figure.savefig参数
fname:路径,包含设置文件格式(如.pdf等)
dpi:图像分辨率,默认100
facecolor、edgecolor:图像背景色,默认为"w"(白色)
format:显示设置文件格式
bbox_inches:图像需要保存的部分。"tight",将尝试剪除图像周围的空白部分
以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持云海天教程。
原文链接:https://www.cnblogs.com/zhangxiaoman/p/12661134.html