TAS5715 具有扬声器均衡、双频带 DRC 和 DC 保护的 25W 立体声 I2S 音频放大器
The TAS5715 is a 25-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.
The TAS5715 is a slave-only device receiving all clocks from external sources. The TAS5715 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz
Max. Power to Single-Ended Load
16
10
10
Max. Power to Bridge Tied Load
20
21
20
21
21.5
25
10
20
20
Max. Power to Parallel Bridge Tied Load
42.8
41.5
50
40
Min. Supported Single-Ended Load
4
2
2
Min. Supported Bridge Tied Load
6
6
6
6
4
4
4
4
3
Min. Supported Parallel Bridge Tied Load
4
2
4
2
Closed/Open Loop
Open
Open
Open
Open
Open
Open
Open
Open
Open
Open
Max. Number of Speaker Outputs
2
2
2
3
2
2
2
2
Input Type
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Control Type
Hardware,Software
Hardware,Software
Hardware,Software
Software
Software
Software
Software
Software
Software
Software
Analog Supply Min [V]
3
3
3
3
3
3
3
3
3
Analog Supply Max [V]
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
Digital Supply Min [V]
3
3
3
3
3
3
3
3
3
3
Power Stage Supply Min (V)
8
8
8
8
8
8
4.5
4.5
8
8
Power Stage Supply Max (V)
26
26
24
26
26
26
26
26
26
21
Volume Control
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Dynamic Range Control (DRC)
Single-Band
Single-Band
2-Band
2-Band
2-Band
2-Band
2-Band
2-Band
2-Band
2-Band
TAS5715 特性
Audio Input/Output
25-W Into an 8- Load From an 18-V Supply
50-W Support in PBTL Mode With 4- Load
Wide PVDD Range, From 8 V to 26 V
Efficient Class-D Operation Eliminates Need for Heatsinks
Requires Only 3.3 V and PVDD
One Serial Audio Input (Two Audio Channels)
I2C Address Selection via PIN (Chip Select)
Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
Headphone PWM Outputs
Dedicated Pin for External Headphone-Amplifier Shutdown
Single-Filter PBTL Support
Audio/PWM Processing
Independent Channel Volume Controls With 24-dB to Mute
Independent Headphone Volume
Programmable Two-Band Dynamic Range Control
Up to Eight User-Programmable Biquads per Channel
Programmable Coefficients for DRC Filters
DC Blocking Filters and PWM DC Detect
CRC Checksum to Detect Biquad Coefficient Corruption
TAS5715 芯片订购指南
器件
状态
温度
价格(美元)
封装 | 引脚
封装数量 | 封装载体
丝印标记
TAS5715PHP
ACTIVE
0 to 85
2.50 | 1ku
250 | JEDEC TRAY (5+1)
TAS5715PHPR
ACTIVE
0 to 85
2.25 | 1ku
1000 | LARGE T&R
TAS5715 质量与无铅数据
器件
环保计划*
铅/焊球涂层
MSL 等级/回流焊峰
环保信息与无铅 (Pb-free)
DPPM / MTBF / FIT 率
TAS5715PHP
Green (RoHS & no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
TAS5715PHP
TAS5715PHP
TAS5715PHPR
Green (RoHS & no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
TAS5715PHPR
TAS5715PHPR
TAS5715 工具与软件
培训内容
型号
软件/工具类型
TAS5715 评估模块 (EVM)
开发电路板/EVM
TAS5715DKD2 评估模块
开发电路板/EVM
TAS5715PHP 评估模块
开发电路板/EVM
TAS5715 应用技术支持与电子电路设计开发资源下载