2、aix6.1以后,默认安装的多路径软件为mpio。IBM存储支持的多路径情况:DS3000: native MPIOonlyDS4000: RDAC, native MPIO, MPIO w/SDDPCMDS5000: native MPIO, MPIO w/SDDPCM下面命令可以查看当前系统使用的多路径情况:#
manage_disk_drivers1:
DS4100: currently MPIO; supported: RDAC/fcparray, MPIO2:
DS4300: currently MPIO; supported: RDAC/fcparray, MPIO3:
DS4500: currently MPIO; supported: RDAC/fcparray, MPIO4:
DS4700/DS4200: currently MPIO; supported: RDAC/fcparray, MPIO5:
DS4800: currently MPIO; supported: RDAC/fcparray, MPIO3、IBM的高端存储可以使用SDD、SDDPCM作为主机的多路径软件SDDPCM就是让MPIO支持IBM的ESS800/DS6000/DS8000/SVC的一个aix module.同理,windows下面也有MPIO,而使windows上的MPIO支持ESS800/DS6000/DS8000/SVC的module叫SDDDSMSDDPCM/SDDDSM都只是模块,还需要启用native的MPIO功能。从ibm sdd support matrix上能看出Support Matrix for AIX SDDSupport Matrix for Windows SDDSupport Matrix for Linux SDDSupport Matrix for HP SDDSupport Matrix for Solaris SDDSupport Matrix for Novell SDDSupport Matrix for AIX SDDPCMSupport Matrix for Windows SDDDSMSupport Matrix for Linux DM-MultipathIBM存储在不同系统下的多路径软件。其中只有aix、windows下才能使用PCM、DSM。(SDDPCM must use MPIO in AIX , SDDSCM use in windows)AIX6.1是缺省带有MPIO,在lsdev里看到的设备如下:#lsdev -Cc diskhdisk0 Available 00-08-00 SAS Disk Drivehdisk1 Available 00-08-00 SAS Disk Drivehdisk2 Available 04-00-01 MPIO other FC
diskhdisk3 Available 04-00-01 MPIO other FC
diskhdisk4 Available 04-00-01 MPIO other FC
diskhdisk5 Available 04-00-01MPIO other FC
diskhdisk6 Available 04-00-01 MPIO other FC
disk在安装完SDDPCM后,在lsdev里看到的设备如下:#lsdev -Cc diskhdisk0 Available 00-08-00 SAS Disk Drivehdisk1 Available 00-08-00 SAS Disk Drivehdisk2 Available 04-00-01 IBM MPIO FC 1750hdisk3 Available 04-00-01 IBM MPIO FC 1750hdisk4 Available 04-00-01 IBM MPIO FC 1750hdisk5 Available 04-00-01 IBM MPIO FC 1750hdisk6 Available 04-00-01 IBM MPIO FC 1750另外,两种情况下,lspv显示的都是hdisk:#lspvhdisk0 00f64cd35ba7253f rootvg activehdisk1 00f64cd3743abfeb rootvg activehdisk2 00f64cd3744116ff Nonehdisk3 00f64cd3744117ef Nonehdisk4 00f64cd674693920 Nonehdisk5 none Nonehdisk6 none None支持AIX6.1的sddpcm包为:devices.sddpcm.61.2.4.0.2.bffdevices.sddpcm.61.rtedevices.fcp.disk.ibm.mpio.rteThe SDDPCM fileset also provides the sddpcm_get_config
command for DS4000/DS5000 devices which displays information about all
MPIO-based DS4K/DS5K subsystems#
sddpcm_get_config -AvFrame.
id 0:Storage
Subsystem worldwide name: 60ab8001143a0000049b88968Controller
count: 2Partition
count: 1Partition
0:Storage
Subsystem Name = 'VIOS_DS4800'hdisk
LUN # Ownership User Labelhdisk3
0 A (non-preferred) lpar3_vol01