linux yum 安装sysloG,基于CentOS yum的syslog-ng安装

1.有以下命令可以查看CentOS 版本：

[root@logsys0 data]# lsb_release -a

LSB Version:    :core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch

Distributor ID:    CentOS

Description:    CentOS release 6.3 (Final)

Release:    6.3

Codename:    Final

2.下载安装EPEL源

Centos 5.x

Centos 6.x

[root@logsys0 data]# rpm -ivh epel-release-6-8.noarch.rpm3. 安装syslog-ng

[root@logsys0 data]# yum --enablerepo=epel install syslog-ng eventlog syslog-ng-libdbi

设置变更：vim /etc/syslog-ng/syslog-ng.conf[root@logsys0 data]# chkconfig rsyslog off; chkconfig syslog-ng on

[root@logsys0 data]# service rsyslog stop;service syslog-ng start

关闭系统日志记录器：                                      [确定]

启动 syslog-ng：                                          [确定]

#重新加载配置：service syslog-ng reload

安装成功

4. 开启防火墙80和514端口

vi /etc/sysconfig/iptables

添加两条规则

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

-A RH-Firewall-1-INPUT -m state --state NEW -m udp -p udp --dport 514 -j ACCEPT

配置文件如下：

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

:RH-Firewall-1-INPUT - [0:0]

-A INPUT -j RH-Firewall-1-INPUT

-A FORWARD -j RH-Firewall-1-INPUT

-A RH-Firewall-1-INPUT -i lo -j ACCEPT

-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT

-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

-A RH-Firewall-1-INPUT -m state --state NEW -m udp -p udp --dport 514 -j ACCEPT

-A INPUT -j REJECT --reject-with icmp-host-prohibited

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

[root@ www.linuxidc.com  data]# /etc/init.d/iptables restart

iptables：清除防火墙规则：                                [确定]

iptables：将链设置为政策 ACCEPT：filter                    [确定]

iptables：正在卸载模块：                                  [确定]

iptables：应用防火墙规则：                                [确定]

Syslog-ng 的详细介绍：请点这里

Syslog-ng 的下载地址：请点这里

相关阅读：