sim7000c接收服务器消息,十万火急！SIM7000C接收不到AT指令

MEGA2560装配了SIM7000C，采用7.4V锂电池作为外部电源，跑样例代码无响应，SIM7000C的ON灯亮着，NET灯会闪烁，但是得不到数据，一直是"Turn ON SIM7000......"，真的很着急，求大佬帮忙！#include

#include

#define PIN_TX     7

#define PIN_RX     8

SoftwareSerial     mySerial(PIN_RX,PIN_TX);

DFRobot_SIM7000    sim7000;

void setup(){

int signalStrength,dataNum;

Serial.begin(115200);

while(!Serial);

sim7000.begin(mySerial);

Serial.println("Enter anything to get positioning ");

char loge[10];

readSerial(loge);

Serial.println("Getting position......");

Serial.println("Turn ON SIM7000......");

if(sim7000.turnON()){                                          //Turn ON SIM7000

Serial.println("Turn ON !");

}

Serial.println("Set baud rate......");

while(1){

if(sim7000.setBaudRate(19200)){                            //Set SIM7000 baud rate from 115200 to 19200 reduce the baud rate to avoid distortion

Serial.println("Set baud rate:19200");

break;

}else{

Serial.println("Faile to set baud rate");

delay(1000);

}

}

Serial.println("Check SIM card......");

if(sim7000.checkSIMStatus()){                                  //Check SIM card

Serial.println("SIM card READY");

}else{

Serial.println("SIM card ERROR, Check if you h ave insert SIM card and restart SIM7000");

while(1);

}

Serial.println("Init positioning function......");

while(1){

if(sim7000.initPos()){

Serial.println("Positioning function initialized");

break;

}else{

Serial.println("Fail to init positioning function");

delay(1000);

}

}

}

void loop(){

Serial.println("Enter anything end with CRLF to get positioning ");

char loge[10];

readSerial(loge);

Serial.println("Getting position......");

if(sim7000.getPosition()){                                     //Get the current position

Serial.print(" Longitude : ");

Serial.println(sim7000.getLongitude());                    //Get longitude

Serial.print(" Latitude : ");

Serial.println(sim7000.getLatitude());                     //Get latitude

}else{

Serial.println("Wrong data try again");

}

}

int readSerial(char result[]){

int i = 0;

while(1){

while(Serial.available() > 0){

char inChar = Serial.read();

if(inChar == '\n'){

result= '\0';

Serial.flush();

return 0;

}

if(inChar != '\r'){

result= inChar;

i++;

}

}

}

}