备份路由器配置文件到服务器,巧用Linux 架设TFTP Server备份路由器的配置文件

在局域网环境中，如果有Cisco 路由器和Linux服务器。也许你需要利用Linux的

TFTP服务去下载Cisco router配置文件 startup-config,在服务器上编辑后再上载

到路由器，在实现中有一些特别注意的地方。

所用软、硬件：Redhat Linux AS 3.0 ，Cisco 2611 路由器

BEIJING#copy run tftp

Address or name of remote host []? 172.31.0.11

Destination filename [beijing-confg]? beijing-route

!!

1968 bytes copied in 0.581 secs (3387 bytes/sec)

别忘了在tftp server 上创建beijing-route权限为777

BEIJING#copy tftp flash

Address or name of remote host []? 172.31.0.11

Source filename []? beijing-route

Destination filename [beijing-route]?

Accessing tftp://172.31.0.11/beijing-route...

Erase flash: before copying? [confirm]

Erasing the flash filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of flash: complete

Loading beijing-route from 172.31.0.11 (via FastEthernet0/0): !

[OK - 1968 bytes]

Verifying checksum... OK (0x5248)

1968 bytes copied in 0.285 secs (6905 bytes/sec)

BEIJING#

用tftp传输大文件时的带宽显示情宽