问题一开始就存在,我就一般在windows系统中寻找资料,下载资源,然后转到linux中,加载windows分区,获取文件。经过一段时间后,终于还是认真解决它好了。在windows设备管理器中查看到网卡信息是:Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller
首先从华硕官方网站找到我的主板系列P4P800 SE的驱动,有Marvell Yukon芯片网卡驱动下载,但似乎只有windows和unix的,有一个写了是for linux的,但下载下来怎么看也不是。
于是去驱动之家搜索,无果而返,其实那个提供拉拉杂杂驱动的站点也不怎样。
百度上搜索也发现不了解决办法,反而发现许多朋友也跟我一样难题未解……
于是就直接去Marvell官方站点找,http://www。marvell。com 真的非常难打开,气死我了!!不过也只有一个希望了,我反复尝试,终于下载到了Yukon Linux Driver Install Package,forLinux kernels 2。
4。13 and higher,即install-8_41。tar。bz2
转入linux,解压,仔细阅读readme,按指导安装:
# 。/install。sh
然后Select the driver installation mode,有两种模式可选……
Installation Instructions for sk98lin Driver
This file contains
1
Overview
2
Required Files and Tools
3
Prerequisites
4
Preparing the Driver Installation Package
5
Driver Installation
5。
1
Installation Mode
5。2
Patch Generation Mode
6
Patch Generation and Recompilation of the Kernel
6。1
Downloading and Unpacking the Linux Kernel
6。
2
Generating the Driver Patch
6。3
Applying the Driver Patch
6。4
Configuring the Linux Kernel
6。5
Compiling the Linux Kernel
6。
6
Installing the Compiled Linux Kernel
7
Manual Module Loading
8
Unloading the Module
9
Driver Parameters
10
Ethtool Commands
11
Troubleshooting
=============================================================
1
Overview
===========
……
2
Required Files and Tools
===========================
……
3
Prerequisites
================
……
4
Preparing the Driver Installation Package。
全部