linux系统bond0怎么删除,Linux下双网卡绑定bond0

[root@localhost network-scripts]# cat ifcfg-bond0

BOOTPROTO=static

IPADDR=1.1.1.1

NETMASK=255.255.255.0

DEVICE=bond0

ONBOOT=yes

BONDING_OPTS="mode=1 miimon=100"

[root@localhost network-scripts]# cat ifcfg-ens5

TYPE=Ethernet

BOOTPROTO=none

DEVICE=ens5

ONBOOT=yes

MASTER=bond0

slave=yes

[root@localhost network-scripts]# cat ifcfg-ens4

TYPE=Ethernet

BOOTPROTO=none

DEVICE=ens4

ONBOOT=yes

MASTER=bond0

slave=yes

[root@localhost network-scripts]# cat /etc/modprobe.d/modprobe.conf

alias bond0 bonding

options bond0 miimon=100 mode=1

[root@localhost network-scripts]#

[root@localhost network-scripts]#

[root@localhost /]# cat etc/rc.d/rc.local

#!/bin/bash

# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES

#

# It is highly advisable to create own systemd services or udev rules

# to run scripts during boot instead of using this file.

#

# In contrast to previous versions due to parallel execution during boot

# this script will NOT be run after all other services.

#

# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure

# that this script will be executed during boot.

touch /var/lock/subsys/local

modprobe bonding

ifconfig bond0 up

ifenslave bond0 ens4 ens5

[root@localhost /]#

[root@localhost /]# cat proc/net/bonding/bond0

Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: fault-tolerance (active-backup)

Primary Slave: None

Currently Active Slave: ens4

MII Status: up

MII Polling Interval (ms): 100

Up Delay (ms): 0

Down Delay (ms): 0

Slave Interface: ens4

MII Status: up

Speed: 1000 Mbps

Duplex: full

Link Failure Count: 0

Permanent HW addr: 52:54:00:22:b6:39

Slave queue ID: 0

Slave Interface: ens5

MII Status: up

Speed: 1000 Mbps

Duplex: full

Link Failure Count: 0

Permanent HW addr: 52:54:00:d9:b9:5a

Slave queue ID: 0

[root@localhost /]#

[root@localhost /]#

阅读(7496) | 评论(0) | 转发(0) |