STM32F1基于HAL库DMA方式驱动ST7735 1.8‘‘屏幕demo

STM32F1基于HAL库DMA方式驱动ST7735 1.8’'屏幕demo

---

• 📌相关篇《STM32F1基于STM32CubeMX配置硬件SPI驱动1.8寸TFT LCD128X160 ST7735S屏幕》

• 🌿相关ST7735驱动代码来源于基于STM32CubeIDE项目：https://github.com/ScarsFun/STM32F103C8T6_cubeIDE_ST7735_1.8_DMA

• 📺demo驱动效果:
  
  

🛠配置如下：

• 🔧SPI1配置如下：
  

• 🌿SPI其他自定义引脚配置
  

• 🌿DMA传输方式设置：
  

🔨添加相关驱动文件到工程

• 🔧 添加驱动文件到对应的User目录下。
  

做好了相关源文件添加后，就无需再补充其他地方了。

📑数据传输方式和屏幕切换说明

• 🌿在工程st7735_cfg.h文件中，修改SPI接口以及是否启用DMA传输以及屏幕型号切换

#define ST7735_SPI_PORT hspi1	//hspi1, hspi2, hspi3...
#define USE_SPI_DMA			//if used DMA for SPI bus

#define ST7735_1_8_DEFAULT_ORIENTATION	// AliExpress/eBay 1.8" display, default orientation 合宙的1.8"选择这个
//#define ST7735S_1_8_DEFAULT_ORIENTATION 	// WaveShare ST7735S-based 1.8" display, default orientation这是微雪的
//#define ST7735_1_44_DEFAULT_ORIENTATION 	// 1.44" display, default orientation
//#define ST7735_MINI_DEFAULT_ORIENTATION 	// mini 160x80 display (it's unlikely you want the default orientation)

• 📝main.c文件内容

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "dma.h"
#include "spi.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "st7735.h"
#include "fonts.h"
#include "testimg.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
uint8_t r = 0;
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
void demoTFT(void)
{
 ST7735_SetRotation(r);

 ST7735_FillScreen(ST7735_BLACK);

 for(int x = 0; x < ST7735_GetWidth(); x++)
 {
   ST7735_DrawPixel(x, 0, ST7735_WHITE);
   ST7735_DrawPixel(x, ST7735_GetHeight() - 1, ST7735_WHITE);
 }

 for(int y = 0; y < ST7735_GetHeight(); y++)
 {
   ST7735_DrawPixel(0, y, ST7735_WHITE);
   ST7735_DrawPixel(ST7735_GetWidth() - 1, y, ST7735_WHITE);
 }

 ST7735_DrawLine(0, 0, ST7735_GetWidth(), ST7735_GetHeight(), ST7735_WHITE);
 ST7735_DrawLine(ST7735_GetWidth(), 0, 0, ST7735_GetHeight(), ST7735_WHITE);

 HAL_Delay(2000);

 ST7735_FillScreen(ST7735_BLACK);

 for (int i = 0; i < ST7735_GetHeight(); i += 4)
 {
  ST7735_DrawFastHLine(0, i, ST7735_GetWidth() - 1, ST7735_WHITE);
 }

 for (int i = 0; i < ST7735_GetWidth(); i += 4)
 {
  ST7735_DrawFastVLine(i, 0, ST7735_GetHeight() - 1, ST7735_WHITE);
 }

 HAL_Delay(2000);

 // Check fonts
 ST7735_FillScreen(ST7735_BLACK);
 ST7735_DrawString(0, 0, "Font_7x10, red on black, lorem ipsum dolor sit amet", Font_7x10, ST7735_RED, ST7735_BLACK);
 ST7735_DrawString(0, 3*10, "Font_11x18, green, lorem ipsum", Font_11x18, ST7735_GREEN, ST7735_BLACK);
 ST7735_DrawString(0, 3*10+3*18, "Font_16x26", Font_16x26, ST7735_BLUE, ST7735_BLACK);
 HAL_Delay(2000);

 // Check colors
 ST7735_FillScreen(ST7735_BLACK);
 ST7735_DrawString(0, 0, "BLACK", Font_11x18, ST7735_WHITE, ST7735_BLACK);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_BLUE);
 ST7735_DrawString(0, 0, "BLUE", Font_11x18, ST7735_BLACK, ST7735_BLUE);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_RED);
 ST7735_DrawString(0, 0, "RED", Font_11x18, ST7735_BLACK, ST7735_RED);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_GREEN);
 ST7735_DrawString(0, 0, "GREEN", Font_11x18, ST7735_BLACK, ST7735_GREEN);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_CYAN);
 ST7735_DrawString(0, 0, "CYAN", Font_11x18, ST7735_BLACK, ST7735_CYAN);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_MAGENTA);
 ST7735_DrawString(0, 0, "MAGENTA", Font_11x18, ST7735_BLACK, ST7735_MAGENTA);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_YELLOW);
 ST7735_DrawString(0, 0, "YELLOW", Font_11x18, ST7735_BLACK, ST7735_YELLOW);
 HAL_Delay(500);

 ST7735_FillScreen(ST7735_WHITE);
 ST7735_DrawString(0, 0, "WHITE", Font_11x18, ST7735_BLACK, ST7735_WHITE);
 HAL_Delay(500);

 // Draw circles
 ST7735_FillScreen(ST7735_BLACK);
 for (int i = 0; i < ST7735_GetHeight() / 2; i += 2)
 {
  ST7735_DrawCircle(ST7735_GetWidth() / 2, ST7735_GetHeight() / 2, i, ST7735_YELLOW);
 }
 HAL_Delay(1000);

 ST7735_FillScreen(ST7735_BLACK);
 ST7735_FillTriangle(0, 0, ST7735_GetWidth() / 2, ST7735_GetHeight(), ST7735_GetWidth(), 0, ST7735_RED);
 HAL_Delay(1000);

 ST7735_FillScreen(ST7735_BLACK);
 ST7735_DrawImage(0, 0, 128, 128, (uint16_t*) test_img_128x128);
 HAL_Delay(3000);

 r++;
}
/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_DMA_Init();
  MX_SPI1_Init();
  /* USER CODE BEGIN 2 */
  ST7735_Init();
  ST7735_Backlight_On();
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
	  demoTFT();
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */

  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

📚驱动工程源码

链接：https://pan.baidu.com/s/1mJGcKRXdi-0Sj9nf2q5Jgw 
提取码：qw7g