写在最前面:2019届秋招进行中。。。希望能拿到自己满意的offer。。。杨超越附体(手动狗头)。。。
网上搜了一下,结合自己总结的。首先介绍一下基本的原理。
脉冲边沿的特性:两侧电平发生了变化
思路:设计两个或多个一位的寄存器,用来接收被检测的信号,系统时钟来一次记一次输入信号,如果用了两个寄存器直接异或就可以了。
module edge_detect(input clk,
input rst_n,
input data_in,
output raising_edge_detect,
output falling_edge_detect,
output double_edge_detect);
reg data_in_d1;
reg data_in_d2;
always @ (posedge clk,negedge rst_n)
begin
if(!rst_n)
begin data_in_d1 <= 1'b0; data_in_d2 <= 1'b0; end
else
begin data_in_d1 <= data_in; data_in_d2 <= data_in_d1;end
end
assign raising_edge_detect = data_in_d1 & (~data_in_d2);//上升沿
assign falling_edge_detect = ~data_in_d1 & data_in_d2;//下降沿
assign double_edge_detect = data_in_d1 ^ data_in_d2;//双边沿
endmodule