pcl/surface/on_nurbs/fitting_surface_tdm.h: 没有那个文件或目录

最新推荐文章于 2023-12-24 16:05:18 发布

我叫安格瑞

最新推荐文章于 2023-12-24 16:05:18 发布

阅读量1k

点赞数

分类专栏： ros 文章标签： c++

本文链接：https://blog.csdn.net/weixin_45363995/article/details/122653565

版权

ros 专栏收录该内容

21 篇文章

订阅专栏

1.pcl重新编译
官网描述：Please note that the modules for NURBS and B-splines are not enabled by default. Make sure you enable “BUILD_surface_on_nurbs” in your ccmake configuration, by setting it to ON.
If your license permits, also enable “USE_UMFPACK” for sparse linear solving. This requires SuiteSparse (libsuitesparse-dev in Ubuntu) which is faster, allows more degrees of freedom (i.e. control points) and more data points.
The program created during this tutorial is available in pcl/examples/surface/example_nurbs_fitting_surface.cpp and is built when “BUILD_examples” is set to ON. This will create the binary called pcl_example_nurbs_fitting_surface in your bin folder.
重新编译参考
BUILD_surface_on_nurbs选项打对勾
2.将修剪的B样条曲线拟合到无序点云/build