550MW发电机变压器组继电保护的整定计算及仿真

电气_空空

已于 2024-01-12 18:36:32 修改

阅读量425

点赞数

分类专栏：毕业设计 matlab仿真文章标签：毕业设计课程设计 matlab

于 2023-10-29 23:25:28 首次发布

本文链接：https://blog.csdn.net/weixin_45905610/article/details/134109958

版权

毕业设计同时被 2 个专栏收录

480 篇文章

订阅专栏

matlab仿真

72 篇文章

订阅专栏

摘要

电力系统继电保护设计是根据系统接线图及要求选择保护方式，进行整定计算，电力系统继电保护的设计与配置是否合理直接影响到电力系统的安全运行。如果设计与配置不当，保护将不能正确工作，会扩大事故停电范围，造成人身和设备事故，给国民经济带来严重的恶果，因此，合理地选择保护方式和正确地整定计算，对保证电力系统的安全运行有非常重要的意义。

电力系统继电保护的设计与配置是否合理会直接影响到电力系统的安全运行，所以必须合理地选择保护配置和进行正确的整定计算。

本次设计要求为550MW 发电机－变压器组配置继电保护和自动装置，目的为通过本次设计，进一步加深对所学知识的理解，以及理解保护与保护之间的配合问题。

本次设计先根据发电机、变压器铭牌选择保护用TA、TV 变比，然后配置发电机-变压器组的保护装置及自动装置，并选择保护装置型号及整定方法，计算保护装置整定所需短路电流和保护装置的整定计算。

关键词：发电机变压器组；整定计算；自动化装置；继电保护

Abstract

Power system relay protection design is based on the system wiring diagram and requirements to select protection mode, setting calculation, power system relay protection design and configuration is reasonable directly affect the safe operation of the power system. If the design and configuration is improper, the protection will not work correctly, will expand the scope of power failure accidents, resulting in personal and equipment accidents, to the national economy to bring serious consequences, therefore, reasonable selection of protection mode and correct setting calculation, to ensure the safe operation of the power system is very important.

Whether the design and configuration of power system relay protection is reasonable will directly affect the safe operation of power system, so it is necessary to choose the protection configuration and correct setting calculation.

The design requirements for 550MW generator - transformer group configuration relay protection and automatic device, the purpose of this design, to further deepen the understanding of the knowledge, as well as the understanding of protection and protection between the problem.

This design first according to the generator, transformer nameplate selection protection with TA, TV ratio, and then configure the generator - transformer group protection device and automatic device, and select the type of protection device and setting method, calculate the short-circuit current required by the protection device setting and setting calculation.

Key words: Engine transformer group; Setting calculation; Automatic device; Relay protection

第二章 原始资料分析... 5

2.1 发电机参数... 5

2.2 主变压器参数... 7

2.3 高压厂用变压器参数... 7

第三章 550MW发电机变压器组继电保护配置说明... 9