kali 虚拟机下 mana-toolkit 的安装

mana-toolkit 的GitHub地址： https://github.com/sensepost/hostapd-mana.

使用 Mana：

• start-noupstream.sh -Starts access point with no internet access
• start-nat-simple.sh -Starts an access point with internet access (use this)
• start-nat-full.sh -Starts a access point and automatically starts sniffing data, bypass https

安装 Mana：

apt-get update
apt-get --yes install build-essential pkg-config git libnl-genl-3-dev libssl-dev
cd /tmp
git clone https://github.com/sensepost/hostapd-mana
cd hostapd-mana
make -C hostapd
mv /tmp/hostapd-mana/hostapd/ /usr/lib/mana-toolkit
cd /usr/share/
git clone --depth 1 https://github.com/sensepost/mana.git
mv mana mana-toolkit
mkdir /etc/mana-toolkit/
mv mana-toolkit/run-mana/conf/*.conf /etc/mana-toolkit/

配置使用 Mana:

• edit mana settings in /etc/mana-toolkit/hostatp-mana.conf > check interface + SSID (Name).

• edit start script in /usr/share/mana-toolkit/run-mana/start-nat-simple.sh > check upstream interface (set to the one that has internet access), check phy (the card that is going to broadcast the network[wlan0]).

• start the script bash /usr/share/mana-toolkit/run-mana/start-nat-simple.sh

转载自：https://jackmckew.dev/network-hacking-with-kali-linux.html