一.实验拓扑
二.实验需求
R5为ISP,只能进行IP地址配置,其所有地址均配为公有IP地址;
R1和R5间使用PPP的PAP认证,R5为主认证方;
R 2与R5之间使用ppp的CHAP认证,R5为主认证方; R3与R5之间使用HDLC封装;
R1、R2、R3构建一个MGRE环境,R1为中心站点,R1、R4间为点到点的GRE;
整个私有网络基本RIP全网可达;
所有pc设置私有IP为源IP,可以访问R5环回,达到全网通。
三.实验思路
1.配IP
R1
R2
R3
R4
R5
2.配置
R1和R5间使用PPP的PAP认证,R5为主认证方;
[r5]aaa
[r5-aaa]local-user wangdaye password cipher wdy12345
[r5-aaa]local-user wangdaye service-type ppp
[r5]int s 4/0/1
[r5-Serial4/0/1]ppp authentication-mode pap
[r1]int s 4/0/0
[r1-Serial4/0/0]ppp pap local-user wangdaye password cipher wdy12345
[r1-Serial4/0/0]shutdown
[r1-Serial4/0/0]undo shutdown
R2与R5之间使用ppp的CHAP认证,R5为主认证方;
[r5]int s 3/0/1
[r5-Serial3/0/1]ppp au
[r5-Serial3/0/1]ppp authentication-mode chap
[r5-Serial3/0/1]q
[r2]int s 4/0/0
[r2-Serial4/0/0]ppp chap user wangdaye
[r2-Serial4/0/0]ppp chap password cipher wdy12345
[r2-Serial4/0/0]shutdown
[r2-Serial4/0/0]undo shutdown
R3与R5之间使用HDLC封装
[r5]int s 4/0/0
[r5-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
[r3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
- 构造环境
先保证公网是通的
[r1]ip route-static 0.0.0.0 0 15.1.1.5
[r2]ip route-static 0.0.0.0 0 25.1.1.5
[r3]ip route-static 0.0.0.0 0 35.1.1.5
[r4]ip route-static 0.0.0.0 0 45.1.1.
R1、R2、R3构建一个隧道地址---MGRE
[R1]int t0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
[R2]int t0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source Serial 4/0/0
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
[R3]int t0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source s 4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
R1、R4构造一个隧道地址---GRE
[R1]int t0/0/1
[R1-Tunnel0/0/1]ip add 10.1.2.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4
[R4]int t0/0/1
[R4-Tunnel0/0/1]ip add 10.1.2.4 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1
1.rip全网通
[R1]rip 1
[R1-rip-1]v 2
[R1-rip-1]undo summary
[R1-rip-1]net 192.168.1.0
[R1-rip-1]net 10.0.0.0
[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary
[R2-rip-1]net 192.168.2.0
[R2-rip-1]net 10.0.0.0
[R3]rip 1
[R3-rip-1]v 2
[R3-rip-1]undo summary
[R3-rip-1]net 192.168.3.0
[R3-rip-1]net 10.0.0.0
[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo su
[R4-rip-1]undo summary
[R4-rip-1]net 192.168.4.0
[R4-rip-1]net 10.
为广播
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
关闭水平分割
[R1-Tunnel0/0/0]undo rip split-horizon
[R2-Tunnel0/0/0]undo rip split-horizon
[R3-Tunnel0/0/0]undo rip split-horizon
测试
5.做nat
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]q
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R2]acl 2000
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000
[R3]acl 2000
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000
测试
--------------------------------------------END-------------------------------------------------------