opensips 安装及基本配置

最新推荐文章于 2024-10-11 07:48:50 发布

whyhonest

最新推荐文章于 2024-10-11 07:48:50 发布

阅读量6.2k

点赞数

文章标签： database mysql domain credentials authentication module

opensips 安装及基本配置

http://wenku.baidu.com/view/f64ea4d333d4b14e852468c2.html

1 . 官方网站 http://www.opensips.org/ 的 download 中下载 opensips 软件包

2 . 编译：
Java代码

1. tar zxvf opensips-1.6.2-tls_src.tar.gz
2. cd opensips-1.6.2-tls

tar zxvf opensips-1.6.2-tls_src.tar.gz
cd opensips-1.6.2-tls

3 . 安装之前更改 makefile ：
删除 Makefile 中的 exclude_modules 的 db-mysql,使opensips使用mysql数据

4. 安装
make all
可能会缺少一下工具，缺少什么装什么就是了。另外可能提示找不到mysql.h等文件，只要把文件拷贝到对应的地方就行了。

make install
默认安装路径 /usr/local 下

5. 配置 vim /usr/local/etc/opensips/opensipsctlrc，把 mysql 的相关的注释去掉
Java代码

1. ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded
2. # If you want to setup a database with opensipsdbctl, you must at least specify
3. # this parameter.
4. DBENGINE=MYSQL
5. ## database host
6. DBHOST=localhost
7. ## database name (for ORACLE this is TNS name)
8. DBNAME=opensips
9. # database path used by dbtext or db_berkeley
10. DB_PATH="/usr/local/etc/opensips/dbtext"
11. ## database read/write user
12. DBRWUSER=opensips
13. ## password for database read/write user
14. DBRWPW="opensipsrw"
15. ## database read only user
16. DBROUSER=opensipsro
17. ## password for database read only user
18. DBROPW=opensipsro
19. ## database super user (for ORACLE this is 'scheme-creator' user)
20. DBROOTUSER="root"
21. # user name column
22. USERCOL="username"

## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded
# If you want to setup a database with opensipsdbctl, you must at least specify
# this parameter.
DBENGINE=MYSQL
## database host
DBHOST=localhost
## database name (for ORACLE this is TNS name)
DBNAME=opensips
# database path used by dbtext or db_berkeley
DB_PATH="/usr/local/etc/opensips/dbtext"
## database read/write user
DBRWUSER=opensips
## password for database read/write user
DBRWPW="opensipsrw"
## database read only user
DBROUSER=opensipsro
## password for database read only user
DBROPW=opensipsro
## database super user (for ORACLE this is 'scheme-creator' user)
DBROOTUSER="root"
# user name column
USERCOL="username"

6. 执行 opensips/sbin/ 下的 opensipsdbctl
Java代码

1. ./opensipsdbctl create ( 生成 opensips 数据库 )

./opensipsdbctl create ( 生成 opensips 数据库 )

7. 这个时候如果重新登录phpmyadmin，会看到已经新建了opensips数据库

8. opensips的运行
Java代码

1. /usr/local/sbin/下的opensipsctl start来启动opensips
2. ps aux | grep opensips 检查应该已经运行了。
3. opensips/sbin/下的opensipsctl stop来停止opensips

/usr/local/sbin/下的opensipsctl start来启动opensips
ps aux | grep opensips 检查应该已经运行了。
opensips/sbin/下的opensipsctl stop来停止opensips

至此基本的opensips配置已经完成了，可以用软件software phone来连接到这个sip server上面并注册成功，不需要先在mysql数据库中添加对应的记录。

9. opensips 认证功能的实现
Java代码

1. labuser@cnta02:/etc/init.d$ cat /usr/local/etc/opensips/opensips.cfg
2. #
3. # $Id: opensips.cfg 6464 2009-12-24 08:00:54Z bogdan_iancu $
4. #
5. # OpenSIPS basic configuration script
6. # by Anca Vamanu <anca@voice-system.ro>
7. #
8. # Please refer to the Core CookBook at:
9. # http://www.opensips.org/index.php?n=Resources.DocsCookbooks
10. # for a explanation of possible statements, functions and parameters.
11. #
12.
13.
14. ####### Global Parameters #########
15.
16. debug=3
17. log_stderror=no
18. log_facility=LOG_LOCAL0
19.
20. fork=yes
21. children=4
22.
23. /* uncomment the following lines to enable debugging */
24. debug=6
25. #fork=no
26. log_stderror=yes
27.
28. /* uncomment the next line to disable TCP (default on) */
29. #disable_tcp=yes
30.
31. /* uncomment the next line to enable the auto temporary blacklisting of
32. not available destinations (default disabled) */
33. #disable_dns_blacklist=no
34.
35. /* uncomment the next line to enable IPv6 lookup after IPv4 dns
36. lookup failures (default disabled) */
37. #dns_try_ipv6=yes
38.
39. /* uncomment the next line to disable the auto discovery of local aliases
40. based on revers DNS on IPs (default on) */
41. #auto_aliases=no
42.
43. /* uncomment the following lines to enable TLS support (default off) */
44. #disable_tls = no
45. #listen = tls:your_IP:5061
46. #tls_verify_server = 1
47. #tls_verify_client = 1
48. #tls_require_client_certificate = 0
49. #tls_method = TLSv1
50. #tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
51. #tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
52. #tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"
53.
54.
55. port=5060
56.
57. /* uncomment and configure the following line if you want opensips to
58. bind on a specific interface/port/proto (default bind on all available) */
59. #listen=udp:192.168.1.2:5060
60.
61.
62. ####### Modules Section ########
63.
64. #set module path
65. mpath="/usr/local/lib/opensips/modules/"
66.
67. /* uncomment next line for MySQL DB support */
68. loadmodule "db_mysql.so"
69. loadmodule "signaling.so"
70. loadmodule "sl.so"
71. loadmodule "tm.so"
72. loadmodule "rr.so"
73. loadmodule "maxfwd.so"
74. loadmodule "usrloc.so"
75. loadmodule "registrar.so"
76. loadmodule "textops.so"
77. loadmodule "mi_fifo.so"
78. loadmodule "uri.so"
79. loadmodule "xlog.so"
80. loadmodule "acc.so"
81. /* uncomment next lines for MySQL based authentication support
82. NOTE: a DB (like db_mysql) module must be also loaded */
83. loadmodule "auth.so"
84. loadmodule "auth_db.so"
85. /* uncomment next line for aliases support
86. NOTE: a DB (like db_mysql) module must be also loaded */
87. loadmodule "alias_db.so"
88. /* uncomment next line for multi-domain support
89. NOTE: a DB (like db_mysql) module must be also loaded
90. NOTE: be sure and enable multi-domain support in all used modules
91. (see "multi-module params" section ) */
92. #loadmodule "domain.so"
93. /* uncomment the next two lines for presence server support
94. NOTE: a DB (like db_mysql) module must be also loaded */
95. #loadmodule "presence.so"
96. #loadmodule "presence_xml.so"
97.
98.
99. # ----------------- setting module-specific parameters ---------------
100.
101.
102. # ----- mi_fifo params -----
103. modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
104. modparam("mi_fifo", "fifo_mode", 0666)
105.
106. # ----- rr params -----
107. # add value to ;lr param to cope with most of the UAs
108. modparam("rr", "enable_full_lr", 1)
109. # do not append from tag to the RR (no need for this script)
110. modparam("rr", "append_fromtag", 0)
111.
112.
113. # ----- registrar params -----
114. /* uncomment the next line not to allow more than 10 contacts per AOR */
115. #modparam("registrar", "max_contacts", 10)
116.
117.
118. # ----- usrloc params -----
119. modparam("usrloc", "db_mode", 0)
120. /* uncomment the following lines if you want to enable DB persistency
121. for location entries */
122. modparam("usrloc", "db_mode", 2)
123. #modparam("usrloc", "db_url",
124. # "mysql://opensips:opensipsrw@localhost/opensips")
125.
126.
127. # ----- uri params -----
128. modparam("uri", "use_uri_table", 0)
129.
130.
131. # ----- acc params -----
132. /* what sepcial events should be accounted ? */
133. modparam("acc", "early_media", 1)
134. modparam("acc", "report_ack", 1)
135. modparam("acc", "report_cancels", 1)
136. /* by default ww do not adjust the direct of the sequential requests.
137. if you enable this parameter, be sure the enable "append_fromtag"
138. in "rr" module */
139. modparam("acc", "detect_direction", 0)
140. /* account triggers (flags) */
141. modparam("acc", "failed_transaction_flag", 3)
142. modparam("acc", "log_flag", 1)
143. modparam("acc", "log_missed_flag", 2)
144. /* uncomment the following lines to enable DB accounting also */
145. modparam("acc", "db_flag", 1)
146. modparam("acc", "db_missed_flag", 2)
147.
148.
149. # ----- auth_db params -----
150. /* uncomment the following lines if you want to enable the DB based
151. authentication */
152. modparam("auth_db", "calculate_ha1", yes)
153. modparam("auth_db", "password_column", "password")
154. #modparam("auth_db", "db_url",
155. # "mysql://opensips:opensipsrw@localhost/opensips")
156. #modparam("auth_db", "load_credentials", "")
157.
158.
159. # ----- alias_db params -----
160. /* uncomment the following lines if you want to enable the DB based
161. aliases */
162. #modparam("alias_db", "db_url",
163. # "mysql://opensips:opensipsrw@localhost/opensips")
164.
165.
166. # ----- domain params -----
167. /* uncomment the following lines to enable multi-domain detection
168. support */
169. #modparam("domain", "db_url",
170. # "mysql://opensips:opensipsrw@localhost/opensips")
171. #modparam("domain", "db_mode", 1) # Use caching
172.
173.
174. # ----- multi-module params -----
175. /* uncomment the following line if you want to enable multi-domain support
176. in the modules (dafault off) */
177. #modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)
178.
179.
180. # ----- presence params -----
181. /* uncomment the following lines if you want to enable presence */
182. #modparam("presence|presence_xml", "db_url",
183. # "mysql://opensips:opensipsrw@localhost/opensips")
184. #modparam("presence_xml", "force_active", 1)
185. #modparam("presence", "server_address", "sip:192.168.1.2:5060")
186.
187.
188. ####### Routing Logic ########
189.
190.
191. # main request routing logic
192.
193. route{
194.
195. if (!mf_process_maxfwd_header("10")) {
196. sl_send_reply("483","Too Many Hops");
197. exit;
198. }
199.
200. if (has_totag()) {
201. # sequential request withing a dialog should
202. # take the path determined by record-routing
203. if (loose_route()) {
204. if (is_method("BYE")) {
205. setflag(1); # do accounting ...
206. setflag(3); # ... even if the transaction fails
207. } else if (is_method("INVITE")) {
208. # even if in most of the cases is useless, do RR for
209. # re-INVITEs alos, as some buggy clients do change route set
210. # during the dialog.
211. record_route();
212. }
213. # route it out to whatever destination was set by loose_route()
214. # in $du (destination URI).
215. route(1);
216. } else {
217. /* uncomment the following lines if you want to enable presence */
218. ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
219. ## # in-dialog subscribe requests
220. ## route(2);
221. ## exit;
222. ##}
223. if ( is_method("ACK") ) {
224. if ( t_check_trans() ) {
225. # non loose-route, but stateful ACK; must be an ACK after
226. # a 487 or e.g. 404 from upstream server
227. t_relay();
228. exit;
229. } else {
230. # ACK without matching transaction ->
231. # ignore and discard
232. exit;
233. }
234. }
235. sl_send_reply("404","Not here");
236. }
237. exit;
238. }
239.
240. #initial requests
241.
242. # CANCEL processing
243. if (is_method("CANCEL"))
244. {
245. if (t_check_trans())
246. t_relay();
247. exit;
248. }
249.
250. t_check_trans();
251.
252. # authenticate if from local subscriber (uncomment to enable auth)
253. # authenticate all initial non-REGISTER request that pretend to be
254. # generated by local subscriber (domain from FROM URI is local)
255. if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/
256. ##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/
257. {
258. if (!proxy_authorize("", "subscriber")) {
259. proxy_challenge("", "0");
260. exit;
261. }
262. if (!db_check_from()) {
263. sl_send_reply("403","Forbidden auth ID");
264. exit;
265. }
266.
267. consume_credentials();
268. # caller authenticated
269. }
270.
271. # preloaded route checking
272. if (loose_route()) {
273. xlog("L_ERR",
274. "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
275. if (!is_method("ACK"))
276. sl_send_reply("403","Preload Route denied");
277. exit;
278. }
279.
280. # record routing
281. if (!is_method("REGISTER|MESSAGE"))
282. record_route();
283.
284. # account only INVITEs
285. if (is_method("INVITE")) {
286. setflag(1); # do accounting
287. }
288. if (!uri==myself)
289. ## replace with following line if multi-domain support is used
290. ##if (!is_uri_host_local())
291. {
292. append_hf("P-hint: outbound\r\n");
293. # if you have some interdomain connections via TLS
294. ##if($rd=="tls_domain1.net") {
295. ## t_relay("tls:domain1.net");
296. ## exit;
297. ##} else if($rd=="tls_domain2.net") {
298. ## t_relay("tls:domain2.net");
299. ## exit;
300. ##}
301. route(1);
302. }
303.
304. # requests for my domain
305.
306. ## uncomment this if you want to enable presence server
307. ## and comment the next 'if' block
308. ## NOTE: uncomment also the definition of route[2] from below
309. ##if( is_method("PUBLISH|SUBSCRIBE"))
310. ## route(2);
311.
312. if (is_method("PUBLISH"))
313. {
314. sl_send_reply("503", "Service Unavailable");
315. exit;
316. }
317.
318.
319. if (is_method("REGISTER"))
320. {
321. # authenticate the REGISTER requests (uncomment to enable auth)
322. if (!www_authorize("", "subscriber"))
323. {
324. www_challenge("", "0");
325. exit;
326. }
327.
328. if (!db_check_to())
329. {
330. sl_send_reply("403","Forbidden auth ID");
331. exit;
332. }
333.
334. if (!save("location"))
335. sl_reply_error();
336.
337. exit;
338. }
339.
340. if ($rU==NULL) {
341. # request with no Username in RURI
342. sl_send_reply("484","Address Incomplete");
343. exit;
344. }
345.
346. # apply DB based aliases (uncomment to enable)
347. alias_db_lookup("dbaliases");
348.
349. # do lookup with method filtering
350. if (!lookup("location","m")) {
351. switch ($retcode) {
352. case -1:
353. case -3:
354. t_newtran();
355. t_reply("404", "Not Found");
356. exit;
357. case -2:
358. sl_send_reply("405", "Method Not Allowed");
359. exit;
360. }
361. }
362.
363. # when routing via usrloc, log the missed calls also
364. setflag(2);
365.
366. route(1);
367. }
368.
369.
370. route[1] {
371. # for INVITEs enable some additional helper routes
372. if (is_method("INVITE")) {
373. t_on_branch("2");
374. t_on_reply("2");
375. t_on_failure("1");
376. }
377.
378. if (!t_relay()) {
379. sl_reply_error();
380. };
381. exit;
382. }
383.
384.
385. # Presence route
386. /* uncomment the whole following route for enabling presence
387. NOTE: do not forget to enable the call of this route from the main
388. route */
389. ##route[2]
390. ##{
391. ## if (!t_newtran())
392. ## {
393. ## sl_reply_error();
394. ## exit;
395. ## };
396. ##
397. ## if(is_method("PUBLISH"))
398. ## {
399. ## handle_publish();
400. ## t_release();
401. ## }
402. ## else
403. ## if( is_method("SUBSCRIBE"))
404. ## {
405. ## handle_subscribe();
406. ## t_release();
407. ## }
408. ##
409. ## exit;
410. ##}
411.
412.
413. branch_route[2] {
414. xlog("new branch at $ru\n");
415. }
416.
417.
418. onreply_route[2] {
419. xlog("incoming reply\n");
420. }
421.
422.
423. failure_route[1] {
424. if (t_was_cancelled()) {
425. exit;
426. }
427.
428. # uncomment the following lines if you want to block client
429. # redirect based on 3xx replies.
430. ##if (t_check_status("3[0-9][0-9]")) {
431. ##t_reply("404","Not found");
432. ## exit;
433. ##}
434.
435. # uncomment the following lines if you want to redirect the failed
436. # calls to a different new destination
437. ##if (t_check_status("486|408")) {
438. ## sethostport("192.168.2.100:5060");
439. ## # do not set the missed call flag again
440. ## t_relay();
441. ##}
442. }

labuser@cnta02:/etc/init.d$ cat /usr/local/etc/opensips/opensips.cfg
#
# $Id: opensips.cfg 6464 2009-12-24 08:00:54Z bogdan_iancu $
#
# OpenSIPS basic configuration script
# by Anca Vamanu <anca@voice-system.ro>
#
# Please refer to the Core CookBook at:
# http://www.opensips.org/index.php?n=Resources.DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#

####### Global Parameters #########

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the following lines to enable debugging */
debug=6
#fork=no
log_stderror=yes

/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes

/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no

/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes

/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no

/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"

port=5060

/* uncomment and configure the following line if you want opensips to
bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.1.2:5060

####### Modules Section ########

#set module path
mpath="/usr/local/lib/opensips/modules/"

/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"
/* uncomment next lines for MySQL based authentication support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "presence.so"
#loadmodule "presence_xml.so"

# ----------------- setting module-specific parameters ---------------

# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)

# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)

# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)

# ----- usrloc params -----
modparam("usrloc", "db_mode", 0)
/* uncomment the following lines if you want to enable DB persistency
for location entries */
modparam("usrloc", "db_mode", 2)
#modparam("usrloc", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")

# ----- uri params -----
modparam("uri", "use_uri_table", 0)

# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)

# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
#modparam("auth_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("auth_db", "load_credentials", "")

# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
#modparam("alias_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")

# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
#modparam("domain", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1) # Use caching

# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)

# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#modparam("presence|presence_xml", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("presence_xml", "force_active", 1)
#modparam("presence", "server_address", "sip:192.168.1.2:5060")

####### Routing Logic ########

# main request routing logic

route{

if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}

if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you want to enable presence */
##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
## # in-dialog subscribe requests
## route(2);
## exit;
##}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}

#initial requests

# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}

t_check_trans();

# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/
##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}

consume_credentials();
# caller authenticated
}

# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}

# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();

# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
## replace with following line if multi-domain support is used
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}

# requests for my domain

## uncomment this if you want to enable presence server
## and comment the next 'if' block
## NOTE: uncomment also the definition of route[2] from below
##if( is_method("PUBLISH|SUBSCRIBE"))
## route(2);

if (is_method("PUBLISH"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}

if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}

if (!db_check_to())
{
sl_send_reply("403","Forbidden auth ID");
exit;
}

if (!save("location"))
sl_reply_error();

exit;
}

if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}

# apply DB based aliases (uncomment to enable)
alias_db_lookup("dbaliases");

# do lookup with method filtering
if (!lookup("location","m")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}

# when routing via usrloc, log the missed calls also
setflag(2);

route(1);
}

route[1] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
}

if (!t_relay()) {
sl_reply_error();
};
exit;
}

# Presence route
/* uncomment the whole following route for enabling presence
NOTE: do not forget to enable the call of this route from the main
route */
##route[2]
##{
## if (!t_newtran())
## {
## sl_reply_error();
## exit;
## };
##
## if(is_method("PUBLISH"))
## {
## handle_publish();
## t_release();
## }
## else
## if( is_method("SUBSCRIBE"))
## {
## handle_subscribe();
## t_release();
## }
##
## exit;
##}

branch_route[2] {
xlog("new branch at $ru\n");
}

onreply_route[2] {
xlog("incoming reply\n");
}

failure_route[1] {
if (t_was_cancelled()) {
exit;
}

# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}

# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## # do not set the missed call flag again
## t_relay();
##}
}

10.对于opensipsctlrc文件更改，把OSIPS_FIFO打开

Java代码

1. OSIPS_FIFO="/tmp/opensips_fifo"