AIX下rootvg镜像硬盘更换步骤，以下以rootvg中hdisk0故障为例：
1、 卸载系统磁盘镜像
# unmirrorvg rootvg hdisk0 2、 确认unmirror是否成功
# lsvg -l rootvg# reducevg rootvg hdisk04、修改dump
# sysdumpdev -P -p /dev/sysdumpnull 5、重新执行删除物理卷hdisk0，可能会报0516-914错误，可以用smitty reducevg强制删除
# reducevg rootvg hdisk06、,删除坏硬盘，用diag工具中Replace/Remove a Device Attached to an SCSI Hot Swap Enclosure Device 选项移除hdisk0
# rmdev -dl hdisk07、插入新硬盘，cfgmgr，lspv识别的新磁盘如果无PVID，执行
# chdev -l hdisk0 -a pv=yes 8、将更换后的硬盘添加如卷组当中
# extendvg rootvg hdisk09、用smit工具做mirrorvg镜像，选择 rootvg和hdisk0，同步模式选择background后台同步
# smit mirrorvg 10、添加启动镜像到新硬盘
# bosboot -ad /dev/hdisk011、设置启动顺序
# bootlist -m normal hdisk0 hdisk1
# bootlist -m normal -o # mklv -t sysdump -y lg_dumplv rootvg 16 hdisk013、修改主设用dump device
# sysdumpdev -Pp /dev/lg_dumplv 14、查看rootvg
# lsvg -l rootvg--------------------------------------------------------------------------------------------------
DIAG定位磁盘
1．登陆AIX，执行#diag
2．回车3．选择“Task Selection”
4．按PgDn，选择“Hot Plug Task”
5．选择“SCSI and SCSI RAID Hot Plug Manager”
6．选择“Identify a Device Attached to a SCSI Hot Swap Enclosure Device”
7．选择想判定位置的目标DISK，比如：hdisk0
8．回车，这个时候去观察硬盘，你会发现硬盘的指示灯会显示“红色”，这个硬盘就是你需要判定的目标盘。
9．如果想把这个有故障的硬盘从SCSI剔除，返回上一级菜单选择“Replace/Remove a Device Attached to an SCSI Hot Swap Enclosure Device”
10．然后选择想剔除的硬盘即可。
下面是本次实验的所有步骤：
AIX Version 5
Copyright IBM Corporation, 1982, 2009.
login: root
root's Password:
*******************************************************************************
* *
* *
* Welcome to AIX Version 5.3! *
* *
* *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
* *
* *
*******************************************************************************
Last unsuccessful login: 2017? 11?20n /dev/pts/0 from 10.20.67.43
Last login: 2017? 15?10n /dev/pts/0 from 10.20.67.43
# diag
DIAGNOSTIC OPERATING INSTRUCTIONS VERSION 5.3.10.0 801001
LICENSED MATERIAL and LICENSED INTERNAL CODE - PROPERTY OF IBM
(C) COPYRIGHTS BY IBM AND BY OTHERS 1982, 2009.
ALL RIGHTS RESERVED.
These programs contain diagnostics, service aids, and tasks for
the system. These procedures should be used whenever problems
with the system occur which have not been corrected by any
software application procedures available.
In general, the procedures will run automatically. However,
sometimes you will be required to select options, inform the
system when to continue, and do simple tasks.
Several keys are used to control the procedures:
- The Enter key continues the procedure or performs an action.
- The Backspace key allows keying errors to be corrected.
- The cursor keys are used to select an option.
Press the F3 key to exit or press Enter to continue.
+------------------------------------------------------+
| Processing data ... |
+------------------------------------------------------+
FUNCTION SELECTION 801002
Move cursor to selection, then press Enter.
Diagnostic Routines
This selection will test the machine hardware. Wrap plugs and
other advanced functions will not be used.
Advanced Diagnostics Routines
This selection will test the machine hardware. Wrap plugs and
other advanced functions will be used.
Task Selection (Diagnostics, Advanced Diagnostics, Service Aids, etc.)
This selection will list the tasks supported by these procedures.
Once a task is selected, a resource menu may be presented showing
all resources supported by the task.
Resource Selection
This selection will list the resources in the system that are supported
by these procedures. Once a resource is selected, a task menu will
be presented showing all tasks that can be run on the resource(s).
+------------------------------------------------------+
| |
| Building Resource Database. |
| Please stand by. |
+------------------------------------------------------+
F1= [50CF10= [49CF3= ??[6;2H Diagnostic Routines
TASKS SELECTION LIST 801004
From the list below, select a task by moving the cursor to
the task and pressing 'Enter'.
To list the resources for the task highlighted, press 'List'.
Run Diagnostics
Run Error Log Analysis
Run Exercisers
Display or Change Diagnostic Run Time Options
Add Resource to Resource List
Automatic Error Log Analysis and Notification
Backup and Restore Media
Certify Media
Change Hardware Vital Product Data
Configure Dials and Lpfkeys
Configure Platform Processor Diagnostics
Configure Reboot Policy
Delete Resource from Resource List
Disk Maintenance
Display Configuration and Resource List
Display Firmware Device Node Information
Display Hardware Error Report
Display Hardware Vital Product Data
Display Multipath I/O (MPIO) Device Configuration
Display Previous Diagnostic Results
Display Resource Attributes
Display Service Hints
Display Software Product Data
Display Test Patterns
Display USB Devices
Display or Change Bootlist
Format Media
Gather System Information
Hot Plug Task
Identify and Attention Indicators
Load ISO Image to Flashdrive
Local Area Network Analyzer
Log Repair Action
Microcode Tasks
RAID Array Manager
SSA Service Aids
This selection provides tools for diagnosing and resolving
problems on SSA attached devices.
Update Disk Based Diagnostics
Update and Manage System Flash
+------------------------------------------------------+
| Processing data ... |
+------------------------------------------------------+
Hot Plug Task 801004
SCSI and SCSI RAID Hot Plug Manager
+------------------------------------------------------+
| Processing data ... |
+------------------------------------------------------+
SCSI and SCSI RAID HOT PLUG MANAGER 802481
The following operations can be performed on devices attached to
SCSI and SCSI RAID Hot Plug Enclosure devices.
Make selection, use Enter to continue.
List Hot Swap Enclosure Devices
This selection lists all scsi hot swap slots and their contents.
Identify a Device Attached to a SCSI Hot Swap Enclosure Device
This selection sets the Identify indication.
Attach a Device to an SCSI Hot Swap Enclosure Device
This selection sets the Add indication and prepares
the slot for insertion of a device.
Replace/Remove a Device Attached to an SCSI Hot Swap Enclosure Device
This selection sets the Remove indication and prepares
the device for removal.
Configure Added/Replaced Devices
This selection runs the configuration manager on the
parent adapter where devices have been added or replaced.
+------------------------------------------------------+
| Processing data ... |
+------------------------------------------------------+
IDENTIFY DEVICE ATTACHED TO SCSI HOT SWAP ENCLOSURE DEVICE 802483
The following is a list of devices attached to SCSI Hot Swap Enclosure devices.
Selecting a slot will set the LED indicator to Identify.
Make selection, use Enter to continue.
U78A0.001.DNWK35N-
ses0 P2-Y1
slot 2 P2-D2 cd0
slot 3 P2-D3 hdisk0
slot 4 [empty slot]
slot 5 [empty slot]
slot 6 P2-D6 hdisk1
slot 7 [empty slot]
slot 8 [empty slot]
+------------------------------------------------------+
| |
| |
| |
| |
| |
| selected device. |
| |
| Use 'Enter' to put the device LED in the |
| Normal state and return to the previous menu. |
| |
| |
| |
| |
| F3= ?9CF10= [8CEnter 55;89H |
+------------------------------------------------------+
The LED should be in the Identify state for the实验定位小机磁盘位置效果如下：
 |
转载https://wenku.baidu.com/view/1f0e329bf12d2af90342e683.html非常感谢！
扫一扫
3476
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
