=====================================================
最简单的基于FFmpeg的视频编码器文章列表:
最简单的基于FFMPEG的视频编码器(YUV编码为H.264)
最简单的基于FFmpeg的视频编码器-更新版(YUV编码为HEVC(H.265))
最简单的基于FFmpeg的编码器-纯净版(不包含libavformat)
=====================================================
本文介绍一个最简单的基于FFMPEG的视频编码器。该编码器实现了YUV420P的像素数据编码为H.264的压缩编码数据。编码器代码十分简单,但是每一行代码都很重要,适合好好研究一下。弄清楚了本代码也就基本弄清楚了FFMPEG的编码流程。目前我虽然已经调通了程序,但是还是有些地方没有完全搞明白,需要下一步继续探究然后补充内容。
本程序使用最新版的类库(编译时间为2014.5.6),开发平台为VC2010。所有的配置都已经做好,只需要运行就可以了。
流程
下面附一张使用FFmpeg编码视频的流程图。使用该流程,不仅可以编码H.264的视频,而且可以编码MPEG4/MPEG2/VP8等等各种FFmpeg支持的视频。图中蓝色背景的函数是实际输出数据的函数。浅绿色的函数是视频编码的函数。
简单介绍一下流程中各个函数的意义:
av_register_all():注册FFmpeg所有编解码器。
avformat_alloc_output_context2():初始化输出码流的AVFormatContext。
avio_open():打开输出文件。
av_new_stream():创建输出码流的AVStream。
avcodec_find_encoder():查找编码器。
avcodec_open2():打开编码器。
avformat_write_header():写文件头(对于某些没有文件头的封装格式,不需要此函数。比如说MPEG2TS)。
avcodec_encode_video2():编码一帧视频。即将AVFrame(存储YUV像素数据)编码为AVPacket(存储H.264等格式的码流数据)。
av_write_frame():将编码后的视频码流写入文件。
flush_encoder():输入的像素数据读取完成后调用此函数。用于输出编码器中剩余的AVPacket。
av_write_trailer():写文件尾(对于某些没有文件头的封装格式,不需要此函数。比如说MPEG2TS)。
代码
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- #include <stdio.h>
-
- #define __STDC_CONSTANT_MACROS
-
- #ifdef _WIN32
-
- extern "C"
- {
- #include "libavutil/opt.h"
- #include "libavcodec/avcodec.h"
- #include "libavformat/avformat.h"
- };
- #else
-
- #ifdef __cplusplus
- extern "C"
- {
- #endif
- #include <libavutil/opt.h>
- #include <libavcodec/avcodec.h>
- #include <libavformat/avformat.h>
- #ifdef __cplusplus
- };
- #endif
- #endif
-
-
- int flush_encoder(AVFormatContext *fmt_ctx,unsigned int stream_index){
- int ret;
- int got_frame;
- AVPacket enc_pkt;
- if (!(fmt_ctx->streams[stream_index]->codec->codec->capabilities &
- CODEC_CAP_DELAY))
- return 0;
- while (1) {
- enc_pkt.data = NULL;
- enc_pkt.size = 0;
- av_init_packet(&enc_pkt);
- ret = avcodec_encode_video2 (fmt_ctx->streams[stream_index]->codec, &enc_pkt,
- NULL, &got_frame);
- av_frame_free(NULL);
- if (ret < 0)
- break;
- if (!got_frame){
- ret=0;
- break;
- }
- printf("Flush Encoder: Succeed to encode 1 frame!\tsize:%5d\n",enc_pkt.size);
-
- ret = av_write_frame(fmt_ctx, &enc_pkt);
- if (ret < 0)
- break;
- }
- return ret;
- }
-
- int main(int argc, char* argv[])
- {
- AVFormatContext* pFormatCtx;
- AVOutputFormat* fmt;
- AVStream* video_st;
- AVCodecContext* pCodecCtx;
- AVCodec* pCodec;
- AVPacket pkt;
- uint8_t* picture_buf;
- AVFrame* pFrame;
- int picture_size;
- int y_size;
- int framecnt=0;
-
- FILE *in_file = fopen("../ds_480x272.yuv", "rb");
- int in_w=480,in_h=272;
- int framenum=100;
-
-
-
- const char* out_file = "ds.h264";
-
- av_register_all();
-
- pFormatCtx = avformat_alloc_context();
-
- fmt = av_guess_format(NULL, out_file, NULL);
- pFormatCtx->oformat = fmt;
-
-
-
-
-
-
-
- if (avio_open(&pFormatCtx->pb,out_file, AVIO_FLAG_READ_WRITE) < 0){
- printf("Failed to open output file! \n");
- return -1;
- }
-
- video_st = avformat_new_stream(pFormatCtx, 0);
-
-
-
- if (video_st==NULL){
- return -1;
- }
-
- pCodecCtx = video_st->codec;
-
- pCodecCtx->codec_id = fmt->video_codec;
- pCodecCtx->codec_type = AVMEDIA_TYPE_VIDEO;
- pCodecCtx->pix_fmt = AV_PIX_FMT_YUV420P;
- pCodecCtx->width = in_w;
- pCodecCtx->height = in_h;
- pCodecCtx->bit_rate = 400000;
- pCodecCtx->gop_size=250;
-
- pCodecCtx->time_base.num = 1;
- pCodecCtx->time_base.den = 25;
-
-
-
-
-
- pCodecCtx->qmin = 10;
- pCodecCtx->qmax = 51;
-
-
- pCodecCtx->max_b_frames=3;
-
-
- AVDictionary *param = 0;
-
- if(pCodecCtx->codec_id == AV_CODEC_ID_H264) {
- av_dict_set(¶m, "preset", "slow", 0);
- av_dict_set(¶m, "tune", "zerolatency", 0);
-
- }
-
- if(pCodecCtx->codec_id == AV_CODEC_ID_H265){
- av_dict_set(¶m, "preset", "ultrafast", 0);
- av_dict_set(¶m, "tune", "zero-latency", 0);
- }
-
-
- av_dump_format(pFormatCtx, 0, out_file, 1);
-
- pCodec = avcodec_find_encoder(pCodecCtx->codec_id);
- if (!pCodec){
- printf("Can not find encoder! \n");
- return -1;
- }
- if (avcodec_open2(pCodecCtx, pCodec,¶m) < 0){
- printf("Failed to open encoder! \n");
- return -1;
- }
-
-
- pFrame = av_frame_alloc();
- picture_size = avpicture_get_size(pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height);
- picture_buf = (uint8_t *)av_malloc(picture_size);
- avpicture_fill((AVPicture *)pFrame, picture_buf, pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height);
-
-
- avformat_write_header(pFormatCtx,NULL);
-
- av_new_packet(&pkt,picture_size);
-
- y_size = pCodecCtx->width * pCodecCtx->height;
-
- for (int i=0; i<framenum; i++){
-
- if (fread(picture_buf, 1, y_size*3/2, in_file) <= 0){
- printf("Failed to read raw data! \n");
- return -1;
- }else if(feof(in_file)){
- break;
- }
- pFrame->data[0] = picture_buf;
- pFrame->data[1] = picture_buf+ y_size;
- pFrame->data[2] = picture_buf+ y_size*5/4;
-
-
- pFrame->pts=i*(video_st->time_base.den)/((video_st->time_base.num)*25);
- int got_picture=0;
-
- int ret = avcodec_encode_video2(pCodecCtx, &pkt,pFrame, &got_picture);
- if(ret < 0){
- printf("Failed to encode! \n");
- return -1;
- }
- if (got_picture==1){
- printf("Succeed to encode frame: %5d\tsize:%5d\n",framecnt,pkt.size);
- framecnt++;
- pkt.stream_index = video_st->index;
- ret = av_write_frame(pFormatCtx, &pkt);
- av_free_packet(&pkt);
- }
- }
-
- int ret = flush_encoder(pFormatCtx,0);
- if (ret < 0) {
- printf("Flushing encoder failed\n");
- return -1;
- }
-
-
- av_write_trailer(pFormatCtx);
-
-
- if (video_st){
- avcodec_close(video_st->codec);
- av_free(pFrame);
- av_free(picture_buf);
- }
- avio_close(pFormatCtx->pb);
- avformat_free_context(pFormatCtx);
-
- fclose(in_file);
-
- return 0;
- }
结果
软件运行截图(受限于文件体积,原始YUV帧数很少):
编码前的YUV序列:
编码后的H.264码流:
下载
Simplest FFmpeg Video Encoder
项目主页
SourceForge:https://sourceforge.net/projects/simplestffmpegvideoencoder/
Github:https://github.com/leixiaohua1020/simplest_ffmpeg_video_encoder
开源中国:http://git.oschina.net/leixiaohua1020/simplest_ffmpeg_video_encoder
下载地址:
http://download.csdn.net/detail/leixiaohua1020/7324115
【修正】之前发现编码后的H.264码流与YUV输入的帧数不同。经过观察对比其他程序后发现需要调用flush_encoder()将编码器中剩余的视频帧输出。已经将该问题修正。
CSDN下载地址(修正后):
http://download.csdn.net/detail/leixiaohua1020/7466649
PUDN下载地址(修正后):
http://www.pudn.com/downloads644/sourcecode/multimedia/detail2605258.html
SourceForge上已经更新。
更新-1.1 (2015.1.03)=========================================
增加了《最简单的基于FFmpeg的编码器-纯净版(不包含libavformat)》中的simplest_ffmpeg_video_encoder_pure工程。
CSDN下载地址:
http://download.csdn.net/detail/leixiaohua1020/8322003
更新-1.2 (2015.2.13)=========================================
这次考虑到了跨平台的要求,调整了源代码。经过这次调整之后,源代码可以在以下平台编译通过:
VC++:打开sln文件即可编译,无需配置。
cl.exe:打开compile_cl.bat即可命令行下使用cl.exe进行编译,注意可能需要按照VC的安装路径调整脚本里面的参数。编译命令如下。
- ::VS2010 Environment
- call "D:\Program Files\Microsoft Visual Studio 10.0\VC\vcvarsall.bat"
- ::include
- @set INCLUDE=include;%INCLUDE%
- ::lib
- @set LIB=lib;%LIB%
- ::compile and link
- cl simplest_ffmpeg_video_encoder.cpp /link avcodec.lib avformat.lib avutil.lib ^
- avdevice.lib avfilter.lib postproc.lib swresample.lib swscale.lib /OPT:NOREF
MinGW:MinGW命令行下运行compile_mingw.sh即可使用MinGW的g++进行编译。编译命令如下。
- g++ simplest_ffmpeg_video_encoder.cpp -g -o simplest_ffmpeg_video_encoder.exe \
- -I /usr/local/include -L /usr/local/lib \
- -lavformat -lavcodec -lavutil
GCC:Linux或者MacOS命令行下运行compile_gcc.sh即可使用GCC进行编译。编译命令如下。
- gcc simplest_ffmpeg_video_encoder.cpp -g -o simplest_ffmpeg_video_encoder.out \
- -I /usr/local/include -L /usr/local/lib -lavformat -lavcodec -lavutil
PS:相关的编译命令已经保存到了工程文件夹中
CSDN下载地址:http://download.csdn.net/detail/leixiaohua1020/8444967
SourceForge上已经更新。