sql server和oracle行转列的一种典型方法

转载于： http://www.cnblogs.com/xiehuiqi220/archive/2009/08/15/1546375.html 

sql server和oracle行转列的一种典型方法

前言：网上有不少文章是讲行转列的，但是大部分都是直接贴代码，忽视了中间过程，本人自己思考了下为什么要这样实现，并且做了如下的笔记，对有些懂的人来说可能没有价值，希望对还不懂的人有一点借鉴意义。

对于有些业务来说，数据在表中的存储和其最终的Grid表现恰好相当于把源表倒转，那么这个时候我们就碰到了如何把行转化为列的问题，为了简化问题，我们且看如下查询出来的数据，您不必关心表的设计以及sql语句：

假设用到的sql语句为：

SELECT   [ 姓名 ] , [ 时代 ] , [ 金钱 ]
   FROM   [ test ] . [ dbo ] . [ people ]   

复制代码

 

这个表存储了两个人在不同时代（时代是固定的三个：年轻、中年和老年）拥有的金币，其中：

张三在年轻、中年和老年时期分别拥有1000、5000、800个金币；

李四在年轻、中年和老年时期分别拥有1200、6000、500个金币。

现在我们想把两人在不同阶段拥有的金币用类似如下的表格来展现：

姓名	年轻	中年	老年
张三	1000	5000	800
李四	1200	6000	500

 

我们现在考虑用最简单和直接的办法来实现，其实关键是如何创建那些需要增加的列，且如何设定其值，现在我们来创建“年轻”列，关键的问题是，这一列的值如何设定？合法的逻辑应该是这样：如果该行不是“年轻”时代，那么其“金钱”我们认为是0，那么sql语句如何写呢？

如果是用的sql server，那么肯定要用到case了：

 

case    [ 时代 ]   when   ' 年轻 '   then   [ 金钱 ]   else   0   end   as  年轻

或

case   when    [ 时代 ] =   ' 年轻 '   then   [ 金钱 ]   else   0   end   as  年轻

复制代码

 

如果用的是oracle，那么要用到decode函数，decode(1+1,3,'错',2,'是',5,'错','都不满足下返回的值')，这个函数将返回“是”，具体用法限于篇幅这里不再介绍，相信大家从这个式子可以大概了解到其意思，用decode创建“年轻”列的句子是：完整的sql语句如下所示：

decode(时代, ' 年轻 ' ,金钱, 0 )) 年轻

 

SELECT   [ 姓名 ] , [ 时代 ] , [ 金钱 ] , 

case    [ 时代 ]   when   ' 年轻 '   then   [ 金钱 ]   else   0   end   as  年轻,
case    [ 时代 ]   when   ' 中年 '   then   [ 金钱 ]   else   0   end   as  中年,
case    [ 时代 ]   when   ' 老年 '   then   [ 金钱 ]   else   0   end   as  老年 

   FROM   [ test ] . [ dbo ] . [ people ]  

复制代码

 

现在我们来看看其执行结果：

相信看到这个结果，大家都知道下一步该做什么，那就是分组：按姓名分组，并且对三个时代的金钱进行求和：

select   [ 姓名 ] , sum ( [ 年轻 ] )  as  年轻, sum ( [ 中年 ] )  as  中年, sum ( [ 老年 ] )  as  老年  from
( SELECT   [ 姓名 ] , [ 时代 ] , [ 金钱 ] , 

case    [ 时代 ]   when   ' 年轻 '   then   [ 金钱 ]   else   0   end   as  年轻,
case    [ 时代 ]   when   ' 中年 '   then   [ 金钱 ]   else   0   end   as  中年,
case    [ 时代 ]   when   ' 老年 '   then   [ 金钱 ]   else   0   end   as  老年 

   FROM   [ test ] . [ dbo ] . [ people ] ) t
   group   by   [ 姓名 ]

复制代码

这里用到了子查询，是为了逻辑更清晰一点，其实可以不用子查询；至于oracle下的sql语句，除了要使用decode之外，其余几乎一致，本人正是在oracle中实现之后才研究了下sql server下的实现方式。

最后看看结果：

事实上，当列不固定的时候，比如除了“年轻”、“中年”、“老年”以外还有其他的未知的时代，实现思路其实基本一致，只是需要动态生成sql而已。

 

 

-----------------------------------

 

 

oracle 行转列 列转行

(2011-03-21 15:43:29)

转载▼

标签： 行转列 oracle 列转行 分析函数 it

分类： ORACLE

1.概述
最近论坛很多人提的问题都与行列转换有关系，所以我对行列转换的相关知识做了一个总结，希望对大家有所帮助，同时有何错疏，恳请大家指出，我也是在写作过程中学习，算是一起和大家学习吧！
行列转换包括以下六种情况：
1)列转行
2)行转列
3)多列转换成字符串
4)多行转换成字符串
5)字符串转换成多列
6)字符串转换成多行
下面分别进行举例介绍。
首先声明一点，有些例子需要如下10g及以后才有的知识：
A.掌握model子句
B.正则表达式
C.加强的层次查询
讨论的适用范围只包括8i,9i,10g及以后版本。
2.列转行
CREATE TABLE t_col_row(
ID INT,
c1 VARCHAR2(10),
c2 VARCHAR2(10),
c3 VARCHAR2(10));
INSERT INTO t_col_row VALUES (1, 'v11', 'v21', 'v31');
INSERT INTO t_col_row VALUES (2, 'v12', 'v22', NULL);
INSERT INTO t_col_row VALUES (3, 'v13', NULL, 'v33');
INSERT INTO t_col_row VALUES (4, NULL, 'v24', 'v34');
INSERT INTO t_col_row VALUES (5, 'v15', NULL, NULL);
INSERT INTO t_col_row VALUES (6, NULL, NULL, 'v35');
INSERT INTO t_col_row VALUES (7, NULL, NULL, NULL);
COMMIT;
SELECT * FROM t_col_row;
2.1 UNION ALL

适用范围：8i,9i,10g及以后版本
SELECT id, 'c1' cn, c1 cv
FROM t_col_row
UNION ALL
SELECT id, 'c2' cn, c2 cv
FROM t_col_row
UNION ALL
SELECT id, 'c3' cn, c3 cv FROM t_col_row;
若空行不需要转换，只需加一个where条件，
WHERE COLUMN IS NOT NULL 即可。
2.2 MODEL

适用范围：10g及以后
SELECT id, cn, cv FROM t_col_row
MODEL
RETURN UPDATED ROWS
PARTITION BY (ID)
DIMENSION BY (0 AS n)
MEASURES ('xx' AS cn,'yyy' AS cv,c1,c2,c3)
RULES UPSERT ALL
(
cn[1] = 'c1',
cn[2] = 'c2',
cn[3] = 'c3',
cv[1] = c1[0],
cv[2] = c2[0],
cv[3] = c3[0]
)
ORDER BY ID,cn;
2.3COLLECTION
适用范围：8i,9i,10g及以后版本
要创建一个对象和一个集合：
CREATE TYPE cv_pair AS OBJECT(cn VARCHAR2(10),cv VARCHAR2(10));
CREATE TYPE cv_varr AS VARRAY(8) OF cv_pair;
SELECT id, t.cn AS cn, t.cv AS cv
FROM t_col_row,
TABLE(cv_varr(cv_pair('c1', t_col_row.c1),
cv_pair('c2', t_col_row.c2),
cv_pair('c3', t_col_row.c3))) t
ORDER BY 1, 2;
3.行转列
CREATE TABLE t_row_col AS
SELECT id, 'c1' cn, c1 cv
FROM t_col_row
UNION ALL
SELECT id, 'c2' cn, c2 cv
FROM t_col_row
UNION ALL
SELECT id, 'c3' cn, c3 cv FROM t_col_row;
SELECT * FROM t_row_col ORDER BY 1,2;
3.1AGGREGATE FUNCTION
适用范围：8i,9i,10g及以后版本
SELECT id,
MAX(decode(cn, 'c1', cv, NULL)) AS c1,
MAX(decode(cn, 'c2', cv, NULL)) AS c2,
MAX(decode(cn, 'c3', cv, NULL)) AS c3
FROM t_row_col
GROUP BY id
ORDER BY 1;
MAX聚集函数也可以用sum、min、avg等其他聚集函数替代。
被指定的转置列只能有一列，但固定的列可以有多列，请看下面的例子：
SELECT mgr, deptno, empno, ename FROM emp ORDER BY 1, 2;
SELECT mgr,
deptno,
MAX(decode(empno, '7788', ename, NULL)) "7788",
MAX(decode(empno, '7902', ename, NULL)) "7902",
MAX(decode(empno, '7844', ename, NULL)) "7844",
MAX(decode(empno, '7521', ename, NULL)) "7521",
MAX(decode(empno, '7900', ename, NULL)) "7900",
MAX(decode(empno, '7499', ename, NULL)) "7499",
MAX(decode(empno, '7654', ename, NULL)) "7654"
FROM emp
WHERE mgr IN (7566, 7698)
AND deptno IN (20, 30)
GROUP BY mgr, deptno
ORDER BY 1, 2;
这里转置列为empno，固定列为mgr，deptno。
还有一种行转列的方式，就是相同组中的行值变为单个列值，但转置的行值不变为列名：
ID CN_1 CV_1 CN_2 CV_2 CN_3 CV_3
1 c1 v11 c2 v21 c3 v31
2 c1 v12 c2 v22 c3
3 c1 v13 c2 c3 v33
4 c1 c2 v24 c3 v34
5 c1 v15 c2 c3
6 c1 c2 c3 v35
7 c1 c2 c3
这种情况可以用分析函数实现：
SELECT id,
MAX(decode(rn, 1, cn, NULL)) cn_1,
MAX(decode(rn, 1, cv, NULL)) cv_1,
MAX(decode(rn, 2, cn, NULL)) cn_2,
MAX(decode(rn, 2, cv, NULL)) cv_2,
MAX(decode(rn, 3, cn, NULL)) cn_3,
MAX(decode(rn, 3, cv, NULL)) cv_3
FROM (SELECT id,
cn,
cv,
row_number() over(PARTITION BY id ORDER BY cn, cv) rn
FROM t_row_col)
GROUP BY ID;
3.2PL/SQL
适用范围：8i,9i,10g及以后版本
这种对于行值不固定的情况可以使用。
下面是我写的一个包，包中
p_rows_column_real用于前述的第一种不限定列的转换；
p_rows_column用于前述的第二种不限定列的转换。
CREATE OR REPLACE PACKAGE pkg_dynamic_rows_column AS
TYPE refc IS REF CURSOR;
PROCEDURE p_print_sql(p_txt VARCHAR2);
FUNCTION f_split_str(p_str VARCHAR2, p_division VARCHAR2, p_seq INT)
RETURN VARCHAR2;
PROCEDURE p_rows_column(p_table IN VARCHAR2,
p_keep_cols IN VARCHAR2,
p_pivot_cols IN VARCHAR2,
p_where IN VARCHAR2 DEFAULT NULL,
p_refc IN OUT refc);
PROCEDURE p_rows_column_real(p_table IN VARCHAR2,
p_keep_cols IN VARCHAR2,
p_pivot_col IN VARCHAR2,
p_pivot_val IN VARCHAR2,
p_where IN VARCHAR2 DEFAULT NULL,
p_refc IN OUT refc);
END;
/
CREATE OR REPLACE PACKAGE BODY pkg_dynamic_rows_column AS
PROCEDURE p_print_sql(p_txt VARCHAR2) IS
v_len INT;
BEGIN
v_len := length(p_txt);
FOR i IN 1 .. v_len / 250 + 1 LOOP
dbms_output.put_line(substrb(p_txt, (i - 1) * 250 + 1, 250));
END LOOP;
END;
FUNCTION f_split_str(p_str VARCHAR2, p_division VARCHAR2, p_seq INT)
RETURN VARCHAR2 IS
v_first INT;
v_last INT;
BEGIN
IF p_seq < 1 THEN
RETURN NULL;
END IF;
IF p_seq = 1 THEN
IF instr(p_str, p_division, 1, p_seq) = 0 THEN
RETURN p_str;
ELSE
RETURN substr(p_str, 1, instr(p_str, p_division, 1) - 1);
END IF;
ELSE
v_first := instr(p_str, p_division, 1, p_seq - 1);
v_last := instr(p_str, p_division, 1, p_seq);
IF (v_last = 0) THEN
IF (v_first > 0) THEN
RETURN substr(p_str, v_first + 1);
ELSE
RETURN NULL;
END IF;
ELSE
RETURN substr(p_str, v_first + 1, v_last - v_first - 1);
END IF;
END IF;
END f_split_str;
PROCEDURE p_rows_column(p_table IN VARCHAR2,
p_keep_cols IN VARCHAR2,
p_pivot_cols IN VARCHAR2,
p_where IN VARCHAR2 DEFAULT NULL,
p_refc IN OUT refc) IS
v_sql VARCHAR2(4000);
TYPE v_keep_ind_by IS TABLE OF VARCHAR2(4000) INDEX BY BINARY_INTEGER;
v_keep v_keep_ind_by;
TYPE v_pivot_ind_by IS TABLE OF VARCHAR2(4000) INDEX BY BINARY_INTEGER;
v_pivot v_pivot_ind_by;
v_keep_cnt INT;
v_pivot_cnt INT;
v_max_cols INT;
v_partition VARCHAR2(4000);
v_partition1 VARCHAR2(4000);
v_partition2 VARCHAR2(4000);
BEGIN
v_keep_cnt := length(p_keep_cols) - length(REPLACE(p_keep_cols, ',')) + 1;
v_pivot_cnt := length(p_pivot_cols) -
length(REPLACE(p_pivot_cols, ',')) + 1;
FOR i IN 1 .. v_keep_cnt LOOP
v_keep(i) := f_split_str(p_keep_cols, ',', i);
END LOOP;
FOR j IN 1 .. v_pivot_cnt LOOP
v_pivot(j) := f_split_str(p_pivot_cols, ',', j);
END LOOP;
v_sql := 'select max(count(*)) from ' || p_table || ' group by ';
FOR i IN 1 .. v_keep.LAST LOOP
v_sql := v_sql || v_keep(i) || ',';
END LOOP;
v_sql := rtrim(v_sql, ',');
EXECUTE IMMEDIATE v_sql
INTO v_max_cols;
v_partition := 'select ';
FOR x IN 1 .. v_keep.COUNT LOOP
v_partition1 := v_partition1 || v_keep(x) || ',';
END LOOP;
FOR y IN 1 .. v_pivot.COUNT LOOP
v_partition2 := v_partition2 || v_pivot(y) || ',';
END LOOP;
v_partition1 := rtrim(v_partition1, ',');
v_partition2 := rtrim(v_partition2, ',');
v_partition := v_partition || v_partition1 || ',' || v_partition2 ||
', row_number() over (partition by ' || v_partition1 ||
' order by ' || v_partition2 || ') rn from ' || p_table;
v_partition := rtrim(v_partition, ',');
v_sql := 'select ';
FOR i IN 1 .. v_keep.COUNT LOOP
v_sql := v_sql || v_keep(i) || ',';
END LOOP;
FOR i IN 1 .. v_max_cols LOOP
FOR j IN 1 .. v_pivot.COUNT LOOP
v_sql := v_sql || ' max(decode(rn,' || i || ',' || v_pivot(j) ||
',null))' || v_pivot(j) || '_' || i || ',';
END LOOP;
END LOOP;
IF p_where IS NOT NULL THEN
v_sql := rtrim(v_sql, ',') || ' from (' || v_partition || ' ' ||
p_where || ') group by ';
ELSE
v_sql := rtrim(v_sql, ',') || ' from (' || v_partition ||
') group by ';
END IF;
FOR i IN 1 .. v_keep.COUNT LOOP
v_sql := v_sql || v_keep(i) || ',';
END LOOP;
v_sql := rtrim(v_sql, ',');
p_print_sql(v_sql);
OPEN p_refc FOR v_sql;
EXCEPTION
WHEN OTHERS THEN
OPEN p_refc FOR
SELECT 'x' FROM dual WHERE 0 = 1;
END;
PROCEDURE p_rows_column_real(p_table IN VARCHAR2,
p_keep_cols IN VARCHAR2,
p_pivot_col IN VARCHAR2,
p_pivot_val IN VARCHAR2,
p_where IN VARCHAR2 DEFAULT NULL,
p_refc IN OUT refc) IS
v_sql VARCHAR2(4000);
TYPE v_keep_ind_by IS TABLE OF VARCHAR2(4000) INDEX BY BINARY_INTEGER;
v_keep v_keep_ind_by;
TYPE v_pivot_ind_by IS TABLE OF VARCHAR2(4000) INDEX BY BINARY_INTEGER;
v_pivot v_pivot_ind_by;
v_keep_cnt INT;
v_group_by VARCHAR2(2000);
BEGIN
v_keep_cnt := length(p_keep_cols) - length(REPLACE(p_keep_cols, ',')) + 1;
FOR i IN 1 .. v_keep_cnt LOOP
v_keep(i) := f_split_str(p_keep_cols, ',', i);
END LOOP;
v_sql := 'select ' || 'cast(' || p_pivot_col ||
' as varchar2(200)) as ' || p_pivot_col || ' from ' || p_table ||
' group by ' || p_pivot_col;
EXECUTE IMMEDIATE v_sql BULK COLLECT
INTO v_pivot;
FOR i IN 1 .. v_keep.COUNT LOOP
v_group_by := v_group_by || v_keep(i) || ',';
END LOOP;
v_group_by := rtrim(v_group_by, ',');
v_sql := 'select ' || v_group_by || ',';
FOR x IN 1 .. v_pivot.COUNT LOOP
v_sql := v_sql || ' max(decode(' || p_pivot_col || ',' || chr(39) ||
v_pivot(x) || chr(39) || ',' || p_pivot_val ||
',null)) as "' || v_pivot(x) || '",';
END LOOP;
v_sql := rtrim(v_sql, ',');
IF p_where IS NOT NULL THEN
v_sql := v_sql || ' from ' || p_table || p_where || ' group by ' ||
v_group_by;
ELSE
v_sql := v_sql || ' from ' || p_table || ' group by ' || v_group_by;
END IF;
p_print_sql(v_sql);
OPEN p_refc FOR v_sql;
EXCEPTION
WHEN OTHERS THEN
OPEN p_refc FOR
SELECT 'x' FROM dual WHERE 0 = 1;
END;
END;
/
4.多列转换成字符串
CREATE TABLE t_col_str AS
SELECT * FROM t_col_row;
这个比较简单，用||或concat函数可以实现：
SELECT concat('a','b') FROM dual;
4.1|| OR CONCAT
适用范围：8i,9i,10g及以后版本
SELECT * FROM t_col_str;
SELECT ID,c1||','||c2||','||c3 AS c123
FROM t_col_str;
5.多行转换成字符串
CREATE TABLE t_row_str(
ID INT,
col VARCHAR2(10));
INSERT INTO t_row_str VALUES(1,'a');
INSERT INTO t_row_str VALUES(1,'b');
INSERT INTO t_row_str VALUES(1,'c');
INSERT INTO t_row_str VALUES(2,'a');
INSERT INTO t_row_str VALUES(2,'d');
INSERT INTO t_row_str VALUES(2,'e');
INSERT INTO t_row_str VALUES(3,'c');
COMMIT;
SELECT * FROM t_row_str;
5.1MAX + DECODE
适用范围：8i,9i,10g及以后版本
SELECT id,
MAX(decode(rn, 1, col, NULL)) ||
MAX(decode(rn, 2, ',' || col, NULL)) ||
MAX(decode(rn, 3, ',' || col, NULL)) str
FROM (SELECT id,
col,
row_number() over(PARTITION BY id ORDER BY col) AS rn
FROM t_row_str) t
GROUP BY id
ORDER BY 1;
5.2ROW_NUMBER + LEAD
适用范围：8i,9i,10g及以后版本
SELECT id, str
FROM (SELECT id,
row_number() over(PARTITION BY id ORDER BY col) AS rn,
col || lead(',' || col, 1) over(PARTITION BY id ORDER BY col) ||
lead(',' || col, 2) over(PARTITION BY id ORDER BY col) ||
lead(',' || col, 3) over(PARTITION BY id ORDER BY col) AS str
FROM t_row_str)
WHERE rn = 1
ORDER BY 1;
5.3MODEL
适用范围：10g及以后版本
SELECT id, substr(str, 2) str FROM t_row_str
MODEL
RETURN UPDATED ROWS
PARTITION BY(ID)
DIMENSION BY(row_number() over(PARTITION BY ID ORDER BY col) AS rn)
MEASURES (CAST(col AS VARCHAR2(20)) AS str)
RULES UPSERT
ITERATE(3) UNTIL( presentv(str[iteration_number+2],1,0)=0)
(str[0] = str[0] || ',' || str[iteration_number+1])
ORDER BY 1;
5.4SYS_CONNECT_BY_PATH
适用范围：8i,9i,10g及以后版本
SELECT t.id id, MAX(substr(sys_connect_by_path(t.col, ','), 2)) str
FROM (SELECT id, col, row_number() over(PARTITION BY id ORDER BY col) rn
FROM t_row_str) t
START WITH rn = 1
CONNECT BY rn = PRIOR rn + 1
AND id = PRIOR id
GROUP BY t.id;
适用范围：10g及以后版本
SELECT t.id id, substr(sys_connect_by_path(t.col, ','), 2) str
FROM (SELECT id, col, row_number() over(PARTITION BY id ORDER BY col) rn
FROM t_row_str) t
WHERE connect_by_isleaf = 1
START WITH rn = 1
CONNECT BY rn = PRIOR rn + 1
AND id = PRIOR id;
5.5WMSYS.WM_CONCAT
适用范围：10g及以后版本
这个函数预定义按','分隔字符串，若要用其他符号分隔可以用，replace将','替换。
SELECT id, REPLACE(wmsys.wm_concat(col), ',', '/') str
FROM t_row_str
GROUP BY id;
6.字符串转换成多列
其实际上就是一个字符串拆分的问题。
CREATE TABLE t_str_col AS
SELECT ID,c1||','||c2||','||c3 AS c123
FROM t_col_str;
SELECT * FROM t_str_col;
6.1SUBSTR + INSTR
适用范围：8i,9i,10g及以后版本
SELECT id,
c123,
substr(c123, 1, instr(c123 || ',', ',', 1, 1) - 1) c1,
substr(c123,
instr(c123 || ',', ',', 1, 1) + 1,
instr(c123 || ',', ',', 1, 2) - instr(c123 || ',', ',', 1, 1) - 1) c2,
substr(c123,
instr(c123 || ',', ',', 1, 2) + 1,
instr(c123 || ',', ',', 1, 3) - instr(c123 || ',', ',', 1, 2) - 1) c3
FROM t_str_col
ORDER BY 1;
6.2REGEXP_SUBSTR
适用范围：10g及以后版本
SELECT id,
c123,
rtrim(regexp_substr(c123 || ',', '.*?' || ',', 1, 1), ',') AS c1,
rtrim(regexp_substr(c123 || ',', '.*?' || ',', 1, 2), ',') AS c2,
rtrim(regexp_substr(c123 || ',', '.*?' || ',', 1, 3), ',') AS c3
FROM t_str_col
ORDER BY 1;
7.字符串转换成多行
CREATE TABLE t_str_row AS
SELECT id,
MAX(decode(rn, 1, col, NULL)) ||
MAX(decode(rn, 2, ',' || col, NULL)) ||
MAX(decode(rn, 3, ',' || col, NULL)) str
FROM (SELECT id,
col,
row_number() over(PARTITION BY id ORDER BY col) AS rn
FROM t_row_str) t
GROUP BY id
ORDER BY 1;
SELECT * FROM t_str_row;
7.1UNION ALL
适用范围：8i,9i,10g及以后版本
SELECT id, 1 AS p, substr(str, 1, instr(str || ',', ',', 1, 1) - 1) AS cv
FROM t_str_row
UNION ALL
SELECT id,
2 AS p,
substr(str,
instr(str || ',', ',', 1, 1) + 1,
instr(str || ',', ',', 1, 2) - instr(str || ',', ',', 1, 1) - 1) AS cv
FROM t_str_row
UNION ALL
SELECT id,
3 AS p,
substr(str,
instr(str || ',', ',', 1, 1) + 1,
instr(str || ',', ',', 1, 2) - instr(str || ',', ',', 1, 1) - 1) AS cv
FROM t_str_row
ORDER BY 1, 2;
适用范围：10g及以后版本
SELECT id, 1 AS p, rtrim(regexp_substr(str||',', '.*?' || ',', 1, 1), ',') AS cv
FROM t_str_row
UNION ALL
SELECT id, 2 AS p, rtrim(regexp_substr(str||',', '.*?' || ',', 1, 2), ',') AS cv
FROM t_str_row
UNION ALL
SELECT id, 3 AS p, rtrim(regexp_substr(str||',', '.*?' || ',',1,3), ',') AS cv
FROM t_str_row
ORDER BY 1, 2;
7.2VARRAY
适用范围：8i,9i,10g及以后版本
要创建一个可变数组：
CREATE OR REPLACE TYPE ins_seq_type IS VARRAY(8) OF NUMBER;
SELECT * FROM TABLE(ins_seq_type(1, 2, 3, 4, 5));
SELECT t.id,
c.column_value AS p,
substr(t.ca,
instr(t.ca, ',', 1, c.column_value) + 1,
instr(t.ca, ',', 1, c.column_value + 1) -
(instr(t.ca, ',', 1, c.column_value) + 1)) AS cv
FROM (SELECT id,
',' || str || ',' AS ca,
length(str || ',') - nvl(length(REPLACE(str, ',')), 0) AS cnt
FROM t_str_row) t
INNER JOIN TABLE(ins_seq_type(1, 2, 3)) c ON c.column_value <=
t.cnt
ORDER BY 1, 2;
7.3SEQUENCE SERIES
这类方法主要是要产生一个连续的整数列，产生连续整数列的方法有很多，主要有：
CONNECT BY,ROWNUM+all_objects,CUBE等。
适用范围：8i,9i,10g及以后版本
SELECT t.id,
c.lv AS p,
substr(t.ca,
instr(t.ca, ',', 1, c.lv) + 1,
instr(t.ca, ',', 1, c.lv + 1) -
(instr(t.ca, ',', 1, c.lv) + 1)) AS cv
FROM (SELECT id,
',' || str || ',' AS ca,
length(str || ',') - nvl(length(REPLACE(str, ',')), 0) AS cnt
FROM t_str_row) t,
(SELECT LEVEL lv FROM dual CONNECT BY LEVEL <= 5) c
WHERE c.lv <= t.cnt
ORDER BY 1, 2;
SELECT t.id,
c.rn AS p,
substr(t.ca,
instr(t.ca, ',', 1, c.rn) + 1,
instr(t.ca, ',', 1, c.rn + 1) -
(instr(t.ca, ',', 1, c.rn) + 1)) AS cv
FROM (SELECT id,
',' || str || ',' AS ca,
length(str || ',') - nvl(length(REPLACE(str, ',')), 0) AS cnt
FROM t_str_row) t,
(SELECT rownum rn FROM all_objects WHERE rownum <= 5) c
WHERE c.rn <= t.cnt
ORDER BY 1, 2;
SELECT t.id,
c.cb AS p,
substr(t.ca,
instr(t.ca, ',', 1, c.cb) + 1,
instr(t.ca, ',', 1, c.cb + 1) -
(instr(t.ca, ',', 1, c.cb) + 1)) AS cv
FROM (SELECT id,
',' || str || ',' AS ca,
length(str || ',') - nvl(length(REPLACE(str, ',')), 0) AS cnt
FROM t_str_row) t,
(SELECT rownum cb FROM (SELECT 1 FROM dual GROUP BY CUBE(1, 2))) c
WHERE c.cb <= t.cnt
ORDER BY 1, 2;
适用范围：10g及以后版本
SELECT t.id,
c.lv AS p,
rtrim(regexp_substr(t.str || ',', '.*?' || ',', 1, c.lv), ',') AS cv
FROM (SELECT id,
str,
length(regexp_replace(str || ',', '[^' || ',' || ']', NULL)) AS cnt
FROM t_str_row) t
INNER JOIN (SELECT LEVEL lv FROM dual CONNECT BY LEVEL <= 5) c ON c.lv <= t.cnt
ORDER BY 1, 2;
7.4HIERARCHICAL + DBMS_RANDOM
适用范围：10g及以后版本
SELECT id,
LEVEL AS p,
rtrim(regexp_substr(str || ',', '.*?' || ',', 1, LEVEL), ',') AS cv
FROM t_str_row
CONNECT BY id = PRIOR id
AND PRIOR dbms_random.VALUE IS NOT NULL
AND LEVEL <=
length(regexp_replace(str || ',', '[^' || ',' || ']', NULL))
ORDER BY 1, 2;
7.5HIERARCHICAL + CONNECT_BY_ROOT
适用范围：10g及以后版本
SELECT id,
LEVEL AS p,
rtrim(regexp_substr(str || ',', '.*?' || ',', 1, LEVEL), ',') AS cv
FROM t_str_row
CONNECT BY id = connect_by_root id
AND LEVEL <=
length(regexp_replace(str || ',', '[^' || ',' || ']', NULL))
ORDER BY 1, 2;
7.6MODEL
适用范围：10g及以后版本
SELECT id, p, cv FROM t_str_row
MODEL
RETURN UPDATED ROWS
PARTITION BY(ID)
DIMENSION BY( 0 AS p)
MEASURES( str||',' AS cv)
RULES UPSERT
(cv
[ FOR p
FROM 1 TO length(regexp_replace(cv[0],'[^'||','||']',null))