u-boot的fpga命令

Zynq> fpga info 0
Xilinx Device
Descriptor @ 0x2ffbb628
Family:         Zynq PL
Interface type: Device configuration interface (Zynq)
Device Size:    13321404 bytes
Cookie:         0x45 (69)
Device name:    7z045
No Device Function Table.
Zynq> fpga info 1
fpga_dev_info: Invalid device number 1
fpga - loadable FPGA image support

Usage:
fpga [operation type] [device number] [image address] [image size]
fpga operations:
  dump  [dev] [address] [size]  Load device to memory buffer
  info  [dev]                   list known device information
  load  [dev] [address] [size]  Load device from memory buffer
  loadp [dev] [address] [size]  Load device from memory buffer with partial bitstream
  loadb [dev] [address] [size]  Load device from bitstream buffer (Xilinx only)
  loadbp        [dev] [address] [size]  Load device from bitstream buffer with partial bitstream(Xilinx only)
Load device from filesystem (FAT by default) (Xilinx only)
  loadfs [dev] [address] [image size] [blocksize] <interface>
        [<dev[:part]>] <filename>
  loadmk [dev] [address]        Load device generated with mkimage
        For loadmk operating on FIT format uImage address must include
        subimage unit name in the form of addr:<subimg_uname>

下面附赠个例子：

Bora> mmc rescan
Bora> mmc info
Device: sdhci@e0100000
Manufacturer ID: 1b
OEM: 534d
Name: 00000
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: No
Capacity: 1.9 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
Bora> fatls mmc 0:1
  4045672   belk-4.0.0_bora_fpga.bit
  4045564   belk-4.0.0_bora_fpga.bin

2 file(s), 1 dir(s)

Bora> fatload mmc 0:1 ${loadaddr} belk-4.0.0_bora_fpga.bin
reading belk-4.0.0_bora_fpga.bin
4045564 bytes read in 272 ms (14.2 MiB/s)
Bora> fpga load 0 ${loadaddr} ${filesize}

在下载的时候会报zynq_align_dma_buffer: Bitstream is not swapped(1) - swap it

说是需要转换大小端，重新操作fpga load 就不会报，后续原因待查。