memset的问题

#include <stdio.h>
#include <string.h>

int main()
{


    int b = 0;

    memset(&b, 0x0102, 3);

    printf("b=0x%x\n", b);

    return 0;
}

输出为b=0x20202
看了memset的实现，原来是将0x0102的最低位(0x02)来赋值的
glibc库的memset的实现为

 

void *
memset (dstpp, c, len)
     void *dstpp;
     int c;
     size_t len;
{
  long int dstp = (long int) dstpp;

  if (len >= 8)
    {
      size_t xlen;
      op_t cccc;

      cccc = (unsigned char) c;
      cccc |= cccc << 8;
      cccc |= cccc << 16;
      if (OPSIZ > 4)
	/* Do the shift in two steps to avoid warning if long has 32 bits.  */
	cccc |= (cccc << 16) << 16;

      /* There are at least some bytes to set.
	 No need to test for LEN == 0 in this alignment loop.  */
      while (dstp % OPSIZ != 0)
	{
	  ((byte *) dstp)[0] = c;
	  dstp += 1;
	  len -= 1;
	}

      /* Write 8 `op_t' per iteration until less than 8 `op_t' remain.  */
      xlen = len / (OPSIZ * 8);
      while (xlen > 0)
	{
	  ((op_t *) dstp)[0] = cccc;
	  ((op_t *) dstp)[1] = cccc;
	  ((op_t *) dstp)[2] = cccc;
	  ((op_t *) dstp)[3] = cccc;
	  ((op_t *) dstp)[4] = cccc;
	  ((op_t *) dstp)[5] = cccc;
	  ((op_t *) dstp)[6] = cccc;
	  ((op_t *) dstp)[7] = cccc;
	  dstp += 8 * OPSIZ;
	  xlen -= 1;
	}
      len %= OPSIZ * 8;

      /* Write 1 `op_t' per iteration until less than OPSIZ bytes remain.  */
      xlen = len / OPSIZ;
      while (xlen > 0)
	{
	  ((op_t *) dstp)[0] = cccc;
	  dstp += OPSIZ;
	  xlen -= 1;
	}
      len %= OPSIZ;
    }

  /* Write the last few bytes.  */
  while (len > 0)
    {
      ((byte *) dstp)[0] = c;
      dstp += 1;
      len -= 1;
    }

  return dstpp;