GEF常见问题2:具有转折点的连接线

从直线连接转换到可以任意增减转折点的折线连接,因为模型里要增加新的元素,所以模型、editpart和图形部分都要有所修改,显得稍微有些烦琐,但其实很多代码是通用的。这个过程主要分为以下几个部分:

1、在模型里增加转折点对应的类(这些转折点在GEF里称作Bendpoint),在类里要具有两个Dimension类型用来记录Bendpoint相对连接线起止点的位置。在连接类里要维护一个Bendpoint列表,并提供访问方法,由于篇幅关系这里只列出连接类中的这几个方法。

public void addBendpoint(int index, ConnectionBendpoint point) {
    getBendpoints().add(index, point);
    firePropertyChange(PROP_BENDPOINT, null, null);
}

/**
 * zhanghao: 为了在更新两个dimension后能发送事件,在MoveBendpointCommand要在用这个方法设置新坐标,
 * 而不是直接用BendPoint里的方法。
 */
public void setBendpointRelativeDimensions(int index, Dimension d1, Dimension d2){
    ConnectionBendpoint cbp=(ConnectionBendpoint)getBendpoints().get(index);
    cbp.setRelativeDimensions(d1,d2);
    firePropertyChange(PROP_BENDPOINT, null, null);
}

public void removeBendpoint(int index) {
    getBendpoints().remove(index);
    firePropertyChange(PROP_BENDPOINT, null, null);
}
2、在原来的连接方式里,由于连接线本身不需要刷新,所以现在要确保这个editpart实现了PropertyChangeListener接口,并像其他editpart一样覆盖了activate()和deactivate()这两个方法,以便接收Bendpoint发生改变的事件。

public void activate() {
    super.activate();
    ((Connection)getModel()).addPropertyChangeListener(this);
}

public void deactivate() {
    super.deactivate();
    ((Connection)getModel()).removePropertyChangeListener(this);
}

public void propertyChange(PropertyChangeEvent event) {
    String property = event.getPropertyName();
    if(Connection.PROP_BENDPOINT.equals(property)){
        refreshBendpoints();
    }
}

为模型连接类对应的editpart里增加一个继承自BendpointEditPolicy的子类ConnectionBendPointEditPolicy,这个类的内容后面会说到。

protected void createEditPolicies() {
    ...
    installEditPolicy(EditPolicy.CONNECTION_BENDPOINTS_ROLE, new ConnectionBendPointEditPolicy());
}

直线连接的情况下,连接的刷新不需要我们负责,但增加了Bendpoint以后,必须在Bendpoint发生改变时刷新连接线的显示。所以在上面这个editpart的refreshVisuals()方法里需要增加一些代码,以便把模型里的Bendpoint转换为图形上的relativeBendpoint。

protected void refreshVisuals() {
    Connection conn = (Connection) getModel();
    List modelConstraint = conn.getBendpoints();
    List figureConstraint = new ArrayList();
    for (int i = 0; i < modelConstraint.size(); i++) {
        ConnectionBendpoint cbp = (ConnectionBendpoint) modelConstraint
                .get(i);
        RelativeBendpoint rbp = new RelativeBendpoint(getConnectionFigure());
        rbp.setRelativeDimensions(cbp.getFirstRelativeDimension(), cbp
                .getSecondRelativeDimension());
        rbp.setWeight((i + 1) / ((float) modelConstraint.size() + 1));
        figureConstraint.add(rbp);
    }
    getConnectionFigure().setRoutingConstraint(figureConstraint);
}

3、创建CreateBendpointCommand、MoveBendpointCommand和DeleteBendpointCommand这三个类,可以像Logic例子那样创建一个基类BendPointCommand让它们来继承。作为例子,BendpointCommand的内容如下。

public class BendpointCommand extends Command {

    protected int index;
    protected Connection connection;
    protected Dimension d1, d2;

    public void setConnection(Connection connection) {
        this.connection = connection;
    }

    public void redo() {
        execute();
    }

    public void setRelativeDimensions(Dimension dim1, Dimension dim2) {
        d1 = dim1;
        d2 = dim2;
    }

    public void setIndex(int i) {
        index = i;
    }

}
4、在ConnectionBendPointEditPolicy里实现BendpointEditPolicy定义的创建、移动和删除Bendpoint的三个方法。

public class ConnectionBendPointEditPolicy extends BendpointEditPolicy {

    protected Command getCreateBendpointCommand(BendpointRequest request) {
        CreateBendpointCommand cmd = new CreateBendpointCommand();
        Point p = request.getLocation();
        Connection conn = getConnection();

        conn.translateToRelative(p);

        Point ref1 = getConnection().getSourceAnchor().getReferencePoint();
        Point ref2 = getConnection().getTargetAnchor().getReferencePoint();

        conn.translateToRelative(ref1);
        conn.translateToRelative(ref2);

        cmd.setRelativeDimensions(p.getDifference(ref1), p.getDifference(ref2));
        cmd.setConnection((com.example.model.Connection) request.getSource()
                .getModel());
        cmd.setIndex(request.getIndex());
        return cmd;
    }

    protected Command getDeleteBendpointCommand(BendpointRequest request) {
        BendpointCommand cmd = new DeleteBendpointCommand();
        Point p = request.getLocation();
        cmd.setConnection((com.example.model.Connection) request.getSource().getModel());
        cmd.setIndex(request.getIndex());
        return cmd;
    }

    protected Command getMoveBendpointCommand(BendpointRequest request) {
        MoveBendpointCommand cmd = new MoveBendpointCommand();
        Point p = request.getLocation();
        Connection conn = getConnection();

        conn.translateToRelative(p);

        Point ref1 = getConnection().getSourceAnchor().getReferencePoint();
        Point ref2 = getConnection().getTargetAnchor().getReferencePoint();

        conn.translateToRelative(ref1);
        conn.translateToRelative(ref2);

        cmd.setRelativeDimensions(p.getDifference(ref1), p.getDifference(ref2));
        cmd.setConnection((com.example.model.Connection) request.getSource()
                .getModel());
        cmd.setIndex(request.getIndex());
        return cmd;
    }
}

修改完成后的编辑器如下图所示。


点此下载工程,此工程修改自GEF应用实例中的GefPractice,目标文件的扩展名改为.gefpracticebp。




评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值