show—bytes
代码总览
#include <stdio.h>
typedef unsigned char* byte_pointer;
void show_bytes(byte_pointer start, int len){
int i;
for (i = 0; i < len; i++)
printf ("%.2x", start[i]);
printf("\n");
}
void show_int(int x){
show_bytes((byte_pointer)&x, sizeof (int));
}
void show_float(float x){
show_bytes((byte_pointer)&x, sizeof (float));
}
void show_pointer(void *x){
show_bytes((byte_pointer)&x, sizeof (void *));
}
void test_show_bytes(int val){
int ival = val;
float fval = (float) val;
int *pval = &ival;
show_int(ival);
show_float(fval);
show_pointer(pval);
}
int main(int argc, char const *argv[])
{
int test = 12345;
test_show_bytes(test);
}
代码说明
typedef unsigned char* byte_pointer;
- 将
unsigned char*
命名为byte_pointer
。 - 在cs:app中,提供的代码格式是如下:
typedef unsigned char *byte_pointer;
- 虽然对于程序不影响,但是我更喜欢我的写法,这样更像指向无符号字符型的指针。
void show_bytes(byte_pointer start, int len){
int i;
for (i = 0; i < len; i++)
printf ("%.2x", start[i]);
printf("\n");
}
show-bytes
这个函数将传入无符号字符对象的指针,和该对象的字节数,然后通过在for
循环中,使用printf ("%.2x", start[i]);
进行格式化输出。%.2x
确保整数都以两位16进制数输出。start
代表对象的首地址,start[i]
代表从start[0]
开始第i个位置处的字节。
void show_int(int x){
show_bytes((byte_pointer)&x, sizeof (int));
}
void show_float(float x){
show_bytes((byte_pointer)&x, sizeof (float));
}
void show_pointer(void *x){
show_bytes((byte_pointer)&x, sizeof (void *));
}
- 这三个函数,将不同类型的对象的指针都强制转化成
unsigned char*
类型,并用sizeof
关键字表示该数据所用字节数。
void test_show_bytes(int val){
int ival = val;
float fval = (float) val;
int *pval = &ival;
show_int(ival);
show_float(fval);
show_pointer(pval);
}
int main(int argc, char const *argv[])
{
int test = 12345;
test_show_bytes(test);
}
- 主函数与测试函数。
编译与结果显示
- 编译命令
gcc show-bytes.c -o main
./main
- 在linux 64位机的输出结果
39300000
00e44046
987de0a9fe7f0000
解释:
123456的16进制表示为 0x00003039,由于linux 64位采用小端存储,所以先输出低位39,然后再输出30。所以结果如上述表示。