A7核----＞LED灯实验

led.h

#ifndef __LED_H__
#define __LED_H__

typedef struct{
	volatile unsigned int MODER;
	volatile unsigned int OTYPER;
	volatile unsigned int OSPEEDR;
	volatile unsigned int PUPDR;
	volatile unsigned int IDR;
	volatile unsigned int ODR;
}gpio_t;
#define GPIOE ((gpio_t*)0x50006000)
#define GPIOF ((gpio_t*)0x50007000)
#define RCC_AHB4_ENSETR (*(volatile unsigned int*)0x50000A28)

//LED1初始化
void led1_init(void);
//LED1点亮
void led1_on(void);
//LED1熄灭
void led1_off(void);

//LED2初始化
void led2_init(void);
//LED2点亮
void led2_on(void);
//LED1熄灭
void led2_off(void);

//LED3初始化
void led3_init(void);
//LED3点亮
void led3_on(void);
//LED1熄灭
void led3_off(void);

#endif

led.c

#include "led.h"


//LED1初始化
void led1_init(void)
{
	//1.设置GPIOE时钟使能
	RCC_AHB4_ENSETR|= (0X1<<4);

	//2.设置PE10引脚为输出模式 MODER[21:20]=01
	GPIOE->MODER &= (~(0x3<<20)); //全部清0
	GPIOE->MODER |= (0X1<<20);
	
	//3.设置PE10引脚为推挽输出 OTYPER[10]=0
	GPIOE->OTYPER &=(~(0X1<<10));

	//4．设置PE10引脚为低速输出模式  OSPEEDR [21:20]=00
	GPIOE->OSPEEDR &=(~(0X3 << 20));

	//5.设置PE10引脚为禁止上下拉     PUPDR [21:20]=00
	GPIOE->PUPDR &= (~(0X3<<20));
}

//LED1点亮
void led1_on(void)
{
	//设置PE10引脚输出高电平 ODR[10]=1
	GPIOE->ODR |= (0X1<<10);
	
}

//LED1熄灭
void led1_off(void)
{
	//设置PE10引脚输出低电平 ODR[10]=0
	GPIOE->ODR &= (~(0x1<<10));
}



//LED2初始化
void led2_init(void)
{
	//1.设置GPIOF时钟使能
	RCC_AHB4_ENSETR|= (0X1<<5);

	//2.设置PF10引脚为输出模式 MODER[21:20]=01
	GPIOF->MODER &= (~(0x3<<20)); //全部清0
	GPIOF->MODER |= (0X1<<20);
	
	//3.设置PF10引脚为推挽输出 OTYPER[10]=0
	GPIOF->OTYPER &=(~(0X1<<10));

	//4．设置PF10引脚为低速输出模式  OSPEEDR [21:20]=00
	GPIOF->OSPEEDR &=(~(0X3 << 20));

	//5.设置PF10引脚为禁止上下拉     PUPDR [21:20]=00
	GPIOF->PUPDR &= (~(0X3<<20));
}

//LED2点亮
void led2_on(void)
{
	//设置PF10引脚输出高电平 ODR[10]=1
	GPIOF->ODR |= (0X1<<10);
}

//LED2熄灭
void led2_off(void)
{
	//设置PF10引脚输出低电平 ODR[10]=0
	GPIOF->ODR &= (~(0x1<<10));
}


//LED3初始化
void led3_init(void)
{
	//1.设置GPIOF时钟使能
	RCC_AHB4_ENSETR|= (0X1<<4);

	//2.设置PF10引脚为输出模式 MODER[17:16]=01
	GPIOE->MODER &= (~(0x3<<16)); //全部清0
	GPIOE->MODER |= (0X1<<16);
	
	//3.设置PF10引脚为推挽输出 OTYPER[8]=0
	GPIOE->OTYPER &=(~(0X1<<8));

	//4．设置PE10引脚为低速输出模式  OSPEEDR [17:16]=00
	GPIOF->OSPEEDR &=(~(0X3 << 16));

	//5.设置PE10引脚为禁止上下拉     PUPDR [17:16]=00
	GPIOE->PUPDR &= (~(0X3<<16));
}

//LED3点亮
void led3_on(void)
{
	//设置PE8引脚输出高电平 ODR[8]=1
	GPIOE->ODR |= (0X1<<8);
}

//LED3熄灭
void led3_off(void)
{
	//设置PE8引脚输出低电平 ODR[8]=0
	GPIOE->ODR &= (~(0x1<<8));
}

main.c

#include "led.h"

//extern void printf(const char *fmt, ...);
void delay_ms(int ms)
{
	int i,j;
	for(i = 0; i < ms;i++)
		for (j = 0; j < 1800; j++);
}


int main()
{
	led1_init();
	led2_init();
	led3_init();

	while(1)
	{
		led1_on();
		delay_ms(1000);
		
		led1_off();
		delay_ms(1000);

		led2_on();
		delay_ms(1000);

		led2_off();
		delay_ms(1000);

		led3_on();
		delay_ms(1000);

		led3_off();
		delay_ms(1000);
	}
	return 0;
}

QQ视频20221027100758