玩转STM32F0 Value Line Discovery 之 点亮LED

1、前面介绍了系统时钟配置工具和GPIO配置工具，在这里就可以用到了，笔者看来GPIO工具不利于初学者对STM32的认识，不建议初学者使用，笔者这里也没用用的，只是用的了时钟配置工具。下面简单介绍，系统时钟工具怎么用，其实打开就可以发现，其实excel宏加载文件，很多人不知道如何配置这个宏才能正常使用该工具，即便配置指导就在文件中，笔者初期也是搞了很久才配置好宏，后面发现有个更简单的方法，微软 office 2010.

      1） 打开excel,点击另存为。

      2）选择保存路径，保存类型（关键）选择为：excel 加载宏，点击"保存"。

      3）接着点击原文件中的保存按钮，会弹出 ”另存为“，这里只要更改文件名（避免与原文件冲突），其他不要更改，点击"保存"。

      4）打开第二次保存的文件，就会发现可以配置了。其中，RUN是配置生效，Generate是生成C文件。

2、系统时钟配置为PLL，48M，具体如下；

   

/**
  ******************************************************************************
  * @file    system_stm32f0xx.c
  * @author  MCD Application Team
  * @version V1.0.1
  * @date    14-July-2014
  * @brief   CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
  *          This file contains the system clock configuration for STM32F0xx devices,
  *          and is generated by the clock configuration tool  
  *          STM32f0xx_Clock_Configuration_V1.0.1.xls
  *
  * 1.  This file provides two functions and one global variable to be called from 
  *     user application:
  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
  *                      and Divider factors, AHB/APBx prescalers and Flash settings),
  *                      depending on the configuration made in the clock xls tool.
  *                      This function is called at startup just after reset and 
  *                      before branch to main program. This call is made inside
  *                      the "startup_stm32f0xx.s" file.
  *
  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
  *                                  by the user application to setup the SysTick 
  *                                  timer or configure other parameters.
  *
  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
  *                                 be called whenever the core clock is changed
  *                                 during program execution.
  *
  * 2. After each device reset the HSI (8 MHz Range) is used as system clock source.
  *    Then SystemInit() function is called, in "startup_stm32f0xx.s" file, to
  *    configure the system clock before to branch to main program.
  *
  * 3. If the system clock source selected by user fails to startup, the SystemInit()
  *    function will do nothing and HSI still used as system clock source. User can 
  *    add some code to deal with this issue inside the SetSysClock() function.
  *
  * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define
  *    in "stm32f0xx.h" file. When HSE is used as system clock source, directly or
  *    through PLL, and you are using different crystal you have to adapt the HSE
  *    value to your own configuration.
  *
  * 5. This file configures the system clock as follows:
  *=============================================================================
  *=========================&#