一、初始化
1
UILabel *myLabel = [[UILabel alloc] initWithFrame:CGRectMake(40, 40, 120, 44)];
2
3
[self.view addSubview:myLabel];
二、设置文字
①、设置默认文本
1
NSString *text = @"标签文本";
2
myLabel.text = text;
效果:
②、设置标签文本(此属性是iOS6.0之后才出现,如若不是必要,不建议使用此属性)
1
NSString *text = @"其实没什么";
2
3
NSMutableAttributedString *attributeString = [[NSMutableAttributedString alloc] initWithString:text];
4
5
[attributeString setAttributes:@{NSForegroundColorAttributeName : [UIColor redColor], NSFontAttributeName : [UIFont systemFontOfSize:17]} range:NSMakeRange(2, 1)];
6
7
myLabel.attributedText = attributeString;
效果:
关键字标红的效果
01
NSString *keyword = @"开源";
02
NSString *result = @"开源中国社区";
03
04
// 设置标签文字
05
NSMutableAttributedString *attrituteString = [[NSMutableAttributedString alloc] initWithString:result];
06
07
// 获取标红的位置和长度
08
NSRange range = [result rangeOfString:keyword];
09
10
// 设置标签文字的属性
11
[attrituteString setAttributes:@{NSForegroundColorAttributeName : [UIColor redColor], NSFontAttributeName : [UIFont systemFontOfSize:17]} range:range];
12
13
// 显示在Label上
14
label.attributedText = attrituteString;
③、设置字体,如果是使用②中的文本,那在设置AttributeString的属性时已经设置过Font了和textColor了,直接使用①设置文本时设置文本时,设置字体方法
1
myLabel.font = [UIFont systemFontOfSize:13];
④、设置颜色
1
myLabel.textColor = [UIColor blueColor];
⑤、设置对齐方式
1
myLabel.textAlignment = NSTextAlignmentCenter;//居中
1
NSTextAlignmentLeft //左对齐
2
NSTextAlignmentCenter //居中
3
NSTextAlignmentRight //右对齐
4
NSTextAlignmentJustified//最后一行自然对齐
5
NSTextAlignmentNatural //默认对齐脚本
NSTextAlignmentJustified和 NSTextAlignmentNatural用的时候会报错,程序崩溃,暂时不知道什么时候可以使用,希望知道的指教一下,感激不尽。
⑥、文字剪裁方式
1
NSLineBreakByWordWrapping = 0,//以空格为边界,保留单词
2
NSLineBreakByCharWrapping, //保留整个字符
3
NSLineBreakByClipping, //简单剪裁,到边界为止
4
NSLineBreakByTruncatingHead, //按照"……文字"显示
5
NSLineBreakByTruncatingTail, //按照"文字……文字"显示
6
NSLineBreakByTruncatingMiddle //按照"文字……"显示
1
myLabel.lineBreakMode = NSLineBreakByTruncatingHead;
⑦、设置Label enabled属性
如果设置为No,则文字颜色会变暗,表明其是不可用的,默认值为YES。
1
myLabel.enabled = NO;
二、匹配Label上的文字
①、是否根据文本宽度改变字体大小
1
myLabel.adjustsFontSizeToFitWidth = YES;
2
//假设文字内容为@"曾在月光之下望烟花,曾共看夕阳渐降下",Label长度为200,则一行显示不下,若设置此属性为YES,则会降低字体大小,以显示全部内容。
前后对比:
②、改变字母之间的间距来适应label大小
1
//当这个属性是YES,标签可能改变标签文本的字母间距,以使该文本更适合标签的边界内。此属性的字符串,而不管当前行的行的裁剪模式。该属性的默认值是NO。
2
myLabel.adjustsLetterSpacingToFitWidth = NO;
3
4
//个人使用了一下,没发现有什么区别,不知道具体是什么时候发挥作用。
③、设置对齐基线
1
myLabel.adjustsFontSizeToFitWidth = YES;//调整基线位置需将此属性设置为YES
1
myLabel.baselineAdjustment = UIBaselineAdjustmentAlignBaselines;
此属性有三个值可选
1
UIBaselineAdjustmentAlignBaselines //文本最上端与Label中线对齐,默认值
2
UIBaselineAdjustmentAlignCenters //文本中线与Label中线对齐
3
UIBaselineAdjustmentNone //文本最下端与Label中线对齐
④、最小字体大小,当字体小于这个最小值时无效,显示此属性值
iOS6.0之前:minimumFontSize
iOS6.0之后:minimumScaleFactor
1
myLabel.minimumScaleFactor = 10.0;//默认值为0,为当前字体大小
⑤、行数
1
myLabel.numberOfLines = 2;//Label行数
⑥、高亮
1
myLabel.highlighted = YES;//是否高亮
2
myLabel.highlightedTextColor = [UIColor redColor];//高亮颜色;此属性在设置按钮的titleLabel时,无论highlighted是YES还是NO,在按钮按下时标题都显示此高亮颜色
⑦、阴影
1
myLabel.shadowColor = [UIColor grayColor];//阴影颜色,默认为nil
2
myLabel.shadowOffset = CGSizeMake(1, 1);//阴影的偏移点
三、Label位置
①、计算UIlabel 随字体多行后的高度
1
CGRect result,bounds;
2
bounds = CGRectMake(0, 0,200, 300);
3
heightLabel = [myLabel textRectForBounds:bounds limitedToNumberOfLines:20];//计算20行后的Label的Frame
4
NSLog(@"%f",heightLabel.size.height);
②、绘制text到指定区域
1
- (void)drawTextInRect:(CGRect)rect
2
//需要重载此方法,然后由子类调用,重写时调用super可以按默认图形属性绘制,若自己完全重写绘制函数,就不用调用super了