ClickHouse函数整理(详细)

1、日期类函数

  1.1 时间或日期截取函数(to)—— 返回非日期

函数    用途    举例    结果
toYear()
取日期或时间日期的年份    toYear(toDateTime('2018-12-11 11:12:13'))              toYear(toDate('2018-12-11'))        返回 2018
 返回 2018
toMonth()    取日期或时间日期的月份
toMonth(toDateTime('2018-12-11 11:12:13'))        
toMonth(toDate('2018-12-11'))  
返回 12
返回 12
toDayOfMonth()
取日期或时间日期的天(1-31)    toMonth(toDayOfMonth('2018-12-11 11:12:13'))     
toMonth(toDayOfMonth('2018-12-11'))   
返回 11
返回 11
toDayOfWeek()
取日期或时间日期的星期(星期一为1,星期日为7)。    toDayOfWeek(toDateTime('2018-12-11 11:12:13')) 
toDayOfWeek(toDate('2018-12-11'))  
返回 2
返回 2
toHour()
取时间日期的小时
toHour(toDateTime('2018-12-11 11:12:13'))      返回 11
toMinute()
取时间日期的分钟
toMinute(toDateTime('2018-12-11 11:12:13'))     返回 12
toSecond()    取时间日期的秒
toSecond(toDateTime('2018-12-11 11:12:13'))  
返回 13
toMonday()    取时间日期最近的周一(返回日期)
toMonday(toDate('2018-12-11'))    
toMonday(toDateTime('2018-12-11 11:12:13'))     返回  2018-12-10
返回  2018-12-10
toTime()     将时间日期的日期固定到某一天,保留原始时间    toTime(toDateTime('2018-12-11 11:12:13'))    返回 1970-01-02 11:12:13

  1.2 时间或日期截取函数(toStartOf)—— 返回日期

函数    用途    举例    结果
toStartOfMonth()
取日期或时间日期的月份的第一天,返回日期
toStartOfMonth(toDateTime('2018-12-11 11:12:13'))
toStartOfMonth(toDate('2018-12-11'))    返回 2018-12-01
返回 2018-12-01
toStartOfQuarter()
取日期或时间日期的季度的第一天,返回日期
toStartOfQuarter(toDateTime('2018-12-11 11:12:13'))
toStartOfQuarter(toDate('2018-12-11'))    返回 2018-10-01
返回 2018-10-01
toStartOfYear()
取日期或时间日期的年份的第一天,返回日期
toStartOfYear(toDateTime('2018-12-11 11:12:13'))
toStartOfYear(toDate('2018-12-11'))    返回 2018-01-01
返回 2018-01-01
toStartOfMinute()
截取时间日期到分钟(之后归零),返回日期
toStartOfMinute(toDateTime('2018-12-11 11:12:13'))    返回 2018-12-11 11:12:00
toStartOfFiveMinute()
截取时间日期到最近的5的倍数分钟(之后归零),返回日期
toStartOfFiveMinute(toDateTime('2018-12-11 11:12:13'))    返回 2018-12-11 11:10:00
toStartOfFifteenMinutes()
截取时间日期到最近的15的倍数分钟(之后归零),返回日期
toStartOfFifteenMinutes(toDateTime('2018-12-11 11:12:13'))    返回 2018-12-11 11:00:00
toStartOfHour()
截取时间日期到小时(之后归零),返回日期
toStartOfHour(toDateTime('2018-12-11 11:12:13'))    返回 2018-12-11 11:00:00
toStartOfDay()
截取时间日期到天(之后归零),返回日期
toStartOfDay(toDateTime('2018-12-11 11:12:13'))    返回 2018-12-11 00:00:00
timeSlot()    将时间日期中,分钟大于等于30的归于30,分钟数小于30的归为00
timeSlot(toDateTime('2018-12-11 11:33:13'))
timeSlot(toDateTime('2018-12-11 11:33:13'))    返回 2018-12-11 11:00:00
返回 2018-12-11 11:30:00

  1.3 日期或时间日期生成函数

函数    用途    举例    结果
now()    生成当前时间日期    now()    返回 2018-12-13 10:10:12
today()    生成今天的日期    today()    返回 2018-12-13
yesterday()    生成昨天的日期    yesterday()
返回 2018-12-12

2、类型转化类函数

  2.1 精度保留(非四舍五入)

函数    用途    举例    结果
toDecimal32('whdwjfew',8)    将数值型或者含有非数字的字符串进行精度保留    toDecimal32(23.12291, 3)
toDecimal32('_23.12291', 3)    返回 23.122
返回 0.000
toDecimal64('whdwjfew',8)    将数值型或者含有非数字的字符串进行精度保留
toDecimal64(23.12291, 3)
toDecimal64('_23.12291', 3)
返回 23.122
返回 0.000
toDecimal128('whdwjfew',8)    将数值型或者含有非数字的字符串进行精度保留
toDecimal128(23.12291, 3)
toDecimal128('_23.12291', 3)
返回 23.122
返回 0.000

  2.2 字符串转化为整数(非整数的字符串返回0)
函数    用途    举例    结果
toUInt8OrZero()    将无符号整数字符型转化为整数型,否则返回0    toUInt8OrZero('123')
toUInt8OrZero('123.12')    返回 123
返回 0
toInt8OrZero()
将整数字符型转化为整数型,否则返回0
toInt8OrZero('123')
toInt8OrZero('-123')
返回 123
返回 -123
toFloat32OrZero()
将数值字符串型转化为数值型,注意:从toFloat32OrZero开始,丢32的没有对应的函数
toFloat32OrZero(‘-123’)
toFloat32OrZero(‘123.123’)
返回 -123
返回 123.123

  2.3 日期与时间日期转化
函数    用途    举例    结果
toDate()    将字符型日期转化为日期型    toDate('2018-12-24')    返回 2018-12-24
toDateTime()
将字符型时间日期转化为时间日期型
toDateTime('2018-12-24 10:10:00')    返回 2018-12-24 10:10:00

  2.4 转化为字符型
函数    用途    举例    结果
toString()    将数值型、字符型、日期等转化为字符型    toString('2018-12-24')
toString('123')
返回 2018-12-24
返回 123

  2.5 查看数据类型
函数    用途    举例    结果
toTypeName()    返回数据的类型    toTypeName(toString('123'))
toTypeName(toDate('2018-12-24'))
返回 String
返回 Date

3、字符串操作

  3.1 基本字符串操作
函数    用途    举例    结果
empty()    判断字符串是空为1,否则为0    empty('')
empty('123a')    返回 1
返回 0
notEmpty()    判断字符串是非空为1,否则为0
notEmpty('')
notEmpty('123a')    返回 0
返回 1
length()    返回字符串的长度    length('')
length('123a')    返回 0
返回 4
lower()    将字符串转为小写    lower('aBc')    返回 abc
upper()    将字符串转为大写
upper('aBc')    返回 ABC
reverse()    将字符串反转    reverse('abc')    返回 cba
substring(s, offset, length)    字符串截取    substring('123abcABC', 2, 3)    返回 23a
appendTrailingCharIfAbsent(s, c)    如果字符串s非空,则将s后追加一个字符c(s最后一个字符与c不同),否则不处理    appendTrailingCharIfAbsent('123abc', 'b')
appendTrailingCharIfAbsent('123abc', 'c')
返回 123abcb
返回 123abc

  3.2 字符串查找
函数    用途    举例    结果
match(haystack,pattern)    字符串正则匹配,返回0或1    match('avhsca','vh’)    返回 1
extract(haystack,pattern)    返回匹配到的第一个子串
extract('iioomAj12123124OOBJB', '\\d+')    返回 12123124
extractAll(haystack,pattern)
返回匹配到的所有子串,输出列表
extractAll('iioomAj12123124OOBJ123B', '\\d+')
返回 [12123124,123]
like(haystack,pattern)    匹配到的数据返回1,否则返回0
like('avhsca','%vh%')
like('avhsca','%vabjh%')    返回 1
返回 0
notLike(haystack, pattern)    与like()函数相反    notLike('avhsca','%vh%')
notLike('avhsca','%vabjh%')
返回 0
返回 1

  3.3 字符串替换
函数    用途    举例    结果
replaceOne(haystack,pattern,replacement)    替换第一个匹配到的pattern
replaceOne('asd123cbbj464sd', 'sd', '-')    返回 a-123cbbj464sd
replaceAll(haystack,pattern,replacement)
替换所有匹配到的pattern
replaceOne('asd123cbbj464sd', 'sd', '-')
返回 a-123cbbj464-
replaceRegexpOne(haystack, pattern, replacement)    正则匹配替换第一个匹配到的pattern
replaceRegexpOne('Hello, World!', 'o', '- ')
返回 Hell- , World!
replaceRegexpAll(haystack,pattern,replacement)    正则匹配替换所有匹配到的pattern
replaceRegexpAll('Hello, World!', '^', 'here: ')
replaceRegexpAll('Hello, World!', 'o', '-- ')    返回 here: Hello, World!
返回 Hell-- , W-- rld!

  3.4 字符串分割
函数    用途    举例    结果
splitByChar(separator, s)    以单个字符分割字符串    splitByChar('-', 'qw-asaf-asfqw-2312-asd')    返回 ['qw','asaf','asfqw','2312','asd']
splitByString(separator, s)    以单个或多个字符分割字符串    splitByString('-', 'qw-asaf-asfqw-2312-asd')
splitByString('-a', 'qw-asaf-asfqw-2312-asd')    返回 ['qw','asaf','asfqw','2312','asd']
返回 ['qw','saf','sfqw-2312','sd']

  3.5 字符串拼接
函数    用途    举例    结果
concat(s1,s2,...)    将字符串拼接    concat('123', 'abc', 'ABC')    返回 123abcABC 

4、条件语句


函数    用途    举例    结果
if(cond,then,else)    条件输出    if(1 > 2, '正确', '错误')    返回 错误
multiIf(cond_1, then_1, cond_2, then_2...else)    多条件输出
multiIf(1 > 2, '正确', 2 < 0, '正确', '错误')    返回 错误

5、数学函数


函数    用途    举例    结果
e()    返回e的值    e()
返回 2.718281828459045
pi()    返回pi的值    pi()
返回 3.141592653589793
exp(x)    返回e的x次方    exp(1)    返回 2.718281828459045
exp2(x)    返回2的x次方    exp2(2)    返回 4
exp10(x)    返回10的x次方    exp10(1)    返回 10
log(x)    返回log以e为底的对数值    log(e())    返回 1
log2(x)    返回log以2为底的对数值    log2(2)    返回 1
log10(x)    返回log以10为底的对数值    log10(100)    返回 2
sqrt(x)    对x开平方    sqrt(4)    返回 2
cbrt(x)    对x开立方    cbrt(8)    返回 2
pow(x, y)    返回x的y次方    pow(2, 3)    返回 8

6、舍入函数


函数    用途    举例    结果
floor(x[, N])    向下取数    floor(123.883, 1)
floor(123.883, -1)    返回 123.8
返回 120
ceil(x[, N])
向上取数    ceil(123.883, 1)
ceil(123.883, -1)
返回 123.9
返回 130
round(x[, N])
四舍五入    round(123.883, 1)
round(123.883, -1)
返回 123.9
返回 120

7、URL操作函数


函数    用途    举例    结果
protocol()    返回URL的协议类型    protocol('http://www.baidu.com.cn')    返回 http
domain()    返回URL的域名    domain('http://www.baidu.com.cn')    返回 www.baidu.com.cn
domainWithoutWWW()    返回URL不带www的域名    domainWithoutWWW('http://www.baidu.com.cn')    返回 baidu.com.cn
topLevelDomain()    返回顶级域名    topLevelDomain('http://www.baidu.com.cn')    返回 cn
firstSignificantSubdomain()    Returns the "first significant subdomain". 
firstSignificantSubdomain('http://www.baidu.com.cn')    返回 baidu
cutToFirstSignificantSubdomain()    Returns the part of the domain that includes top-level subdomains up to the "first significant subdomain" (see the explanation above).
cutToFirstSignificantSubdomain('http://www.baidu.com.cn')    返回 baidu.com.cn
path()    返回URL的路径    path('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split')    返回 /s
pathFull()    返回URL的完整路径    pathFull('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split')    返回 /s?wd=SQL%E4%B8%AD%E7%9A%84split
queryString()    返回URL的参数(查询字符串)    queryString('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split')    返回 wd=SQL%E4%B8%AD%E7%9A%84split
extractURLParameters()    以列表的形式返回URL的参数
extractURLParameters('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split&ur=qwguq')    返回 ['wd=SQL%E4%B8%AD%E7%9A%84split','ur=qwguq']
extractURLParameterNames()    以列表的形式返回URL的参数名
extractURLParameterNames('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split&ur=qwguq')    返回 ['wd','ur'] 
cutQueryString()    返回URL?(参数)前面的内容    cutQueryString('https://www.baidu.com/s?wd=SQL%E4%B8%AD%E7%9A%84split&ur=qwguq')    返回 https://www.baidu.com/s 

7、IP操作函数


函数    用途    举例    结果
IPv4StringToNum(s)    将IPV4转为数值,非IPV4的转化为0    IPv4StringToNum('23.217.198.69')
IPv4StringToNum('adwh.124.qwfqw')
返回 400148037
返回 0
IPv4NumToString(num)    将数值转为IPV4
IPv4NumToString(400148037)    返回 23.217.198.69
IPv4NumToStringClassC(num)    将数值转为IPV4,且最后的段位用xxx代替
IPv4NumToStringClassC(400148037)    返回 23.217.198.xxx

8、表操作

  8.1 表连接操作
函数    用途    举例    结果
INNER JOIN    内连接    A表 INNER JOIN B表    A表与B表的公共部分
LEFT OUTER JOIN    左外连接    A 表 LEFT OUTER JOIN B表    A表不在B表中的部分
RIGHT  OUTER JOIN    右外连接    A 表 RIGHT  OUTER JOIN B表
B表不在A表中的部分
FULL  OUTER JOIN
全外连接    A 表 FULL  OUTER JOIN B表
A与B表全部,没有为NULL

  8.2 LIMIT操作
函数    用途    举例    结果
LIMIT N    查询N条数据,一般跟ORDER BY 连用    ORDER BY hit DESC LIMIT 10    按照hit列降排取前10
LIMIT N BY Clause
按照Clause列查询N条数据,一般跟ORDER BY 连用    SELECT date, domain, count(1) AS hit from db.tb where...
GROUP BY  date, domain,
ORDER BY  hit  DESC
LIMIT 10 BY date    取每天TOP10的域名

9、字典操作


函数    用途    举例    结果
dictGetString()    字典映射    dictGetString('ck_abc_dic', 'ck_value', tuple(_abc))    

————————————————
版权声明:本文为CSDN博主「Watch_dou」的原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/u012111465/article/details/85250030

评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值