ADS中Image$$RO$$Limit的计算

程序的源码如下：

AREA RWData, DATA, READWRITE temp1 DCD 10 temp2 DCD 3 AREA ARMex, CODE, READONLY ; name this block of code ENTRY ; mark first instruction ; to execute ; References to external symbols ; IMPORT |Image$$RO$$Base| ; Base of ROM code, hzh IMPORT |Image$$RO$$Limit| ; End of ROM code (=start of ROM data) IMPORT |Image$$RW$$Base| ; Base of RAM to initialise IMPORT |Image$$ZI$$Base| ; Base and limit of area IMPORT |Image$$ZI$$Limit| ; to zero initialise start MOV r0, #temp1 ; Set up parameters MOV r1, #temp2 ADD r0, r0, r1 ; r0 = r0 + r1 stop MOV r0, #0x18 ; angel_SWIreason_ReportException LDR r1, =0x20026 ; ADP_Stopped_ApplicationExit SWI 0x123456 ; ARM semihosting SWI BaseOfROM DCD |Image$$RO$$Base| TopOfROM DCD |Image$$RO$$Limit| END ; Mark end of file

 

输出的Image Symbol Table内容如下：

    Global Symbols

    Symbol Name                              Value     Ov Type        Size  Object(Section)

    BuildAttributes$$ARM_ISAv4$M$PE$A:L22$X:L11$S22$~IW$~STKCKD$~SHL$OSPACE 0x00000000   Number         0  anon$$obj.o ABSOLUTE
    Image$$RO$$Base                          0x00000000   Number         0  anon$$obj.o ABSOLUTE
    Image$$RO$$Limit                         0x00000024   Number         0  anon$$obj.o ABSOLUTE
    Image$$RW$$Base                          0x00000024   Number         0  anon$$obj.o ABSOLUTE
    Image$$ZI$$Base                          0x0000002c   Number         0  anon$$obj.o ABSOLUTE
    Image$$ZI$$Limit                         0x0000002c   Number         0  anon$$obj.o ABSOLUTE

 

各部分的大小：

      Code    RO Data    RW Data    ZI Data      Debug  

        36          0          8          0        236   Grand Totals

================================================================================

    Total RO  Size(Code + RO Data)                   36 (   0.04kB)
    Total RW  Size(RW Data + ZI Data)                 8 (   0.01kB)
    Total ROM Size(Code + RO Data + RW Data)         44 (   0.04kB)

================================================================================

 

image中的分布为

ZI

RW

RO

 

RO base = 0

RO limit = RO base + RO size + 1 = 0 + 0x24 - 1 + 1 = 0x24（RO部分后面一个字节的地址）

RW base = RO limit

ZI base = RW base + RW size = 0x24 + 8 - 1 + 1 = 0x2c

由于没有ZI，所以ZI limit = ZI base

 

这个工程似乎一切都与预料符合，但boot270工程好像不符合？？？