k8s实验搭建(二进制方式)

困困的yy

于 2024-08-12 11:25:34 发布

阅读量1.7k

点赞数 35

文章标签： kubernetes 容器云原生

本文链接：https://blog.csdn.net/yaoyuan666666/article/details/141126769

版权

一、K8S架构

1.K8S简介

kubernetes简称k8s。是⽤于⾃动部署，扩展和管理容器化应⽤程序的开源系统。

中⽂官⽹：https://kubernetes.io/zh/
中⽂社区：https://www.kubernetes.org.cn/
官⽅⽂档：https://kubernetes.io/zh/docs/home/
社区⽂档：https://docs.kubernetes.org.cn/

2.K8S架构图

在这里插入图片描述

3.用户创建pod的时序图

在这里插入图片描述

二、K8S组件

1.master节点组件

api-server组件：提供了集群管理的API接口，通过它管理集群

scheduler组件：负责调度pod到合适的节点上

replaction-controller组件：负责维护集群状态，比如维护pod的副本数、节点的状态等

2.node节点组件

kublet组件：运行在node节点上，负责维护容器的生命周期，与apiserver交互

kube-proxy组件：运行在node节点上，负责节点上的网络代理

flannel组件：一个网络解决方案，负责提供容器间的网络通信

docker：运行在node节点上，负责运行容器

3.其它组件

etcd组件：保存了整个集群的状态，包括pod、service等资源对象的状态信息

三、K8S环境准备（所有节点）

1.服务器角色、IP、组件规划

服务器角色	IP	组件规划
k8s-master	192.168.168.140	kube-apiserver，kube-controller-manager，kube-scheduler，etcd
k8s-node1	192.168.168.141	kubelet，kube-proxy，docker，flannel，etcd
k8s-node2	192.168.168.142	kubelet，kube-proxy，docker，flannel, etcd

2.设置主机名及地址解析

hostnamectl set-hostname k8s-master
hostnamectl set-hostname k8s-node1
hostnamectl set-hostname k8s-node2

vim /etc/hosts                                                                                               192.168.168.140  k8s-master
192.168.168.141  k8s-node1
192.168.168.142  k8s-node2

3.关闭防火墙和selinux

systemctl stop firewalld && systemctl disable firewalld
setenforce 0  && sed -i s/=enforcing/=disabled/g  /etc/selinux/config

四、etcd数据库部署(所有节点)

1.生成证书

(1)使⽤cfssl来⽣成⾃签证书,证书随便在那台机器⽣成都可以。哪⾥⽤将证书拷⻉到哪⾥就可以

下载cfssl⼯具：下载的这些是可执⾏的⼆进制命令直接⽤就可以

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64


chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

(2)生成etcd证书

mkdir cert
cd cert/

vim ca-config.json   #⽣成ca中⼼的
{
    "signing": {
        "default": {
            "expiry": "87600h"
        },
        "profiles": {
            "www": {
                "expiry": "87600h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "server auth",
                    "client auth"
                ]
            }
        }
    }
}

vim ca-csr.json     #⽣成ca中⼼的证书请求⽂件
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}

vim server-csr.json    #⽣成服务器的证书请求⽂件
{
    "CN": "etcd",
    "hosts": [
        "192.168.168.140",
        "192.168.168.141",
        "192.168.168.142"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "BeiJing",
            "ST": "BeiJing"
        }
    ]
}

cfssl gencert -initca ca-csr.json | cfssljson -bare ca -

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server

[root@k8s-master cert]# ls *.pem          ####生成了以下4个文件
ca-key.pem  ca.pem  server-key.pem  server.pem

2.安装etcd

(1)下载安装包 ###3台都要操作

wget https://github.com/etcd-io/etcd/releases/download/v3.2.12/etcd-v3.2.12-linux-amd64.tar.gz

mkdir /opt/etcd/{bin,cfg,ssl} -p

tar zxvf etcd-v3.2.12-linux-amd64.tar.gz

mv etcd-v3.2.12-linux-amd64/{etcd,etcdctl} /opt/etcd/bin/

(2)创建etcd配置⽂件 ###3台都要操作

vim  /opt/etcd/cfg/etcd

#[Member]
ETCD_NAME="etcd01"            #####这里每一台需要修改为etcd02，etcd03
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.168.140:2380"   #写每个节点的ip
ETCD_LISTEN_CLIENT_URLS="https://192.168.168.140:2379" #写每个节点的ip

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.168.140:2380" #写每个节点的ip
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.168.140:2379"  #写每个节点的ip
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.168.140:2380,etcd02=https://192.168.168.141:2380,etcd03=https://192.168.168.142:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

(3)systemd管理etcd

vim /usr/lib/systemd/system/etcd.service

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd
ExecStart=/opt/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/opt/etcd/ssl/server.pem \
--key-file=/opt/etcd/ssl/server-key.pem \
--peer-cert-file=/opt/etcd/ssl/server.pem \
--peer-key-file=/opt/etcd/ssl/server-key.pem \
--trusted-ca-file=/opt/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/opt/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

(4)将master上⾯⽣成的证书scp到剩余两台机器上⾯

scp ca*pem server*pem k8s-node1:/opt/etcd/ssl

scp ca*pem server*pem k8s-node2:/opt/etcd/ssl

(5)全部启动并设置开启启动

systemctl daemon-reload 

systemctl start etcd && systemctl enable etcd

(6)部署完成后，三台机器都检查etcd集群状态

/opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379" cluster-health

出现以下健康的状态则正常

[root@k8s-master cert]# /opt/etcd/bin/etcdctl --ca-file=/opt/etcd/ssl/ca.pem --cert-file=/opt/etcd/ssl/server.pem --key-file=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379" cluster-health
member 685d63a0417f3 is healthy: got healthy result from https://192.168.168.140:2379
member 726c108304fd702c is healthy: got healthy result from https://192.168.168.142:2379
member 876bbcd3e05709b2 is healthy: got healthy result from https://192.168.168.141:2379
cluster is healthy

五、部署Flannel⽹络插件 (node节点)

1.安装docker

（1）下载docker-ce的yum源

wget http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

（2）安装docker依赖的包

yum install -y yum-utils

（3）安装docker-ce

yum install docker-ce -y

2.安装Flannel插件

（1）Flannel要⽤etcd存储⾃身⼀个⼦⽹信息，所以要保证能成功连接Etcd，写⼊预定义⼦⽹段

cd /opt/etcd/ssl/               ###要在这个目录下去执行，不然找不到秘钥文件

###k8s-node1设置172.41网段
/opt/etcd/bin/etcdctl --ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem --endpoints="https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379" set /coreos.com/network/config  '{ "Network": "172.41.0.0/16", "Backend": {"Type": "vxlan"}}'      

###k8s-node2设置172.42网段
/opt/etcd/bin/etcdctl --ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem --endpoints="https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379" set /coreos.com/network/config  '{ "Network": "172.42.0.0/16", "Backend": {"Type": "vxlan"}}'

（2）下载Flannel⽹络插件二进制包

wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz

tar zxvf flannel-v0.10.0-linux-amd64.tar.gz

mkdir -pv /opt/kubernetes/bin

mv flanneld mk-docker-opts.sh /opt/kubernetes/bin

（3）配置Flannel

mkdir -p /opt/kubernetes/cfg/

vim /opt/kubernetes/cfg/flanneld

FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379 -etcd-cafile=/opt/etcd/ssl/ca.pem -etcd-certfile=/opt/etcd/ssl/server.pem -etcd-keyfile=/opt/etcd/ssl/server-key.pem"

（4）systemd管理Flannel

vim /usr/lib/systemd/system/flanneld.service

[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service


[Service]
Type=notify
EnvironmentFile=/opt/kubernetes/cfg/flanneld
ExecStart=/opt/kubernetes/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]                                                                                                       
WantedBy=multi-user.target

（5）重新配置docker.service

vim /usr/lib/systemd/system/docker.service

[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target


[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

（6）重启flannel和docker

systemctl daemon-reload                                                                             systemctl start flanneld                                                                                      systemctl enable flanneld docker                                                                     systemctl restart docker

六、api-server组件部署(master节点)

1.生成证书

给api-server创建证书，因为别的服务器访问api-server的时候需要通过证书认证

（1）创建ca证书：
[root@k8s-master ~]# mkdir -p /opt/crt
[root@k8s-master ~]# cd /opt/crt/

[root@k8s-master crt]#vim ca-config.json
{
	"signing": {
		"default": {
			"expiry": "87600h"
		},
		"profiles": {
			"kubernetes": {
				"expiry": "87600h",
				"usages": [
					"signing",
					"key encipherment",
					"server auth",
					"client auth"
				]
			}
		}
	}
}


vim ca-csr.json
{
	"CN": "kubernetes",
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [{
		"C": "CN",
		"L": "Beijing",
		"ST": "Beijing",
		"O": "k8s",
		"OU": "System"
	}]
}

[root@k8s-master crt]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca -

（2）生成apiserver证书：
[root@k8s-master crt]# vim server-csr.json
{
	"CN": "kubernetes",
	"hosts": [
		"10.0.0.1", ##这是后⾯dns要使⽤的虚拟⽹络的⽹关，不⽤改，就⽤这个切忌
	    "127.0.0.1",
		"192.168.168.140", ## master的IP地址。
		"192.168.168.141",
		"192.168.168.142",
		"kubernetes",
		"kubernetes.default",
		"kubernetes.default.svc",
		"kubernetes.default.svc.cluster",
		"kubernetes.default.svc.cluster.local"
	],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [{
		"C": "CN",
		"L": "BeiJing",
		"ST": "BeiJing",
		"O": "k8s",
		"OU": "System"
	}]
}

[root@k8s-master crt]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json 
-profile=kubernetes server-csr.json | cfssljson -bare server


（3）生成kube-proxy证书：
[root@k8s-master crt]# vim kube-proxy-csr.json
{
	"CN": "system:kube-proxy",
	"hosts": [],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [{
		"C": "CN",
		"L": "BeiJing",
		"ST": "BeiJing",
		"O": "k8s",
		"OU": "System"
	}]
}

[root@k8s-master crt]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

（4）最终生成以下证书文件：
[root@k8s-master1 crt]# ls *pem
ca-key.pem ca.pem kube-proxy-key.pem kube-proxy.pem server-key.pem server.pem

2.部署api-server组件

部署api-server组件只需要在master节点进行，但是下载的kubernetes-server-linux-amd64.tar.gz的这个压缩包里边包含了所需的所有组件

（1）下载安装包及创建目录
[root@k8s-master1 ~]# wget https://dl.k8s.io/v1.11.10/kubernetes-server-linux-amd64.tar.gz
[root@k8s-master1 ~]# mkdir /opt/kubernetes/{bin,cfg,ssl} -pv

（2）拷贝命令到bin目录下，拷贝证书文件到ssl目录下
[root@k8s-master1 ~]# tar zxvf kubernetes-server-linux-amd64.tar.gz
[root@k8s-master1 ~]# cd kubernetes/server/bin
[root@k8s-master1 ~]# cp kube-apiserver kube-scheduler kube-controller-manager kubectl /opt/kubernetes/bin
[root@k8s-master1 ~]# cp /opt/crt/{server.pem,server-key.pem,ca.pem,ca-key.pem} /opt/kubernetes/ssl/

（3）在cfg目录下创建token文件
[root@k8s-master crt]# cd /opt/kubernetes/cfg/
[root@k8s-master crt]# vim token.csv
674c457d4dcf2eefe4920d7dbb6b0ddc,kubelet-bootstrap,10001,"system:kubelet-bootstrap"
第⼀列：随机字符串，⾃⼰可⽣成
第⼆列：⽤户名
第三列：UID
第四列：⽤户组

（4）创建api-server配置⽂件
[root@k8s-master cfg]# vim kube-apiserver
KUBE_APISERVER_OPTS="--logtostderr=true \
--v=4 \
--etcd-servers=https://192.168.168.140:2379,https://192.168.168.141:2379,https://192.168.168.142:2379 \
--bind-address=192.168.168.140 \ #master的ip地址，就是安装api-server的机器地址
--secure-port=6443 \
--advertise-address=192.168.168.140 \
--allow-privileged=true \
--service-cluster-ip-range=10.0.0.0/24 \ #这⾥就⽤这个⽹段切记不要修改
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \
--enable-bootstrap-token-auth \
--token-auth-file=/opt/kubernetes/cfg/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/opt/kubernetes/ssl/server.pem \
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \
--client-ca-file=/opt/kubernetes/ssl/ca.pem \
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \
--etcd-cafile=/opt/etcd/ssl/ca.pem \
--etcd-certfile=/opt/etcd/ssl/server.pem \
--etcd-keyfile=/opt/etcd/ssl/server-key.pem"

注意：配置好前⾯⽣成的证书，确保能连接etcd。
参数说明：
* --logtostderr 启⽤⽇志
* --v ⽇志等级
* --etcd-servers etcd集群地址
* --bind-address 监听地址
* --secure-port https安全端⼝
* --advertise-address 集群通告地址
* --allow-privileged 启⽤授权
* --service-cluster-ip-range Service虚拟IP地址段
* --enable-admission-plugins 准⼊控制模块
* --authorization-mode 认证授权，启⽤RBAC授权和节点⾃管理
* --enable-bootstrap-token-auth 启⽤TLS bootstrap功能，后⾯会讲到
* --token-auth-file token⽂件
* --service-node-port-range Service Node类型默认分配端⼝范围

（5）systemd管理api-server
[root@k8s-master cfg]# vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-apiserver
ExecStart=/opt/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

（6）设置启动并且开机自启api-server
[root@k8s-master cfg]# systemctl daemon-reload
[root@k8s-master cfg]# systemctl enable kube-apiserver
[root@k8s-master cfg]# systemctl start kube-apiserver
[root@k8s-master cfg]# systemctl status kube-apiserver

七、部署scheduler组件（master节点）

scheduler组件只需要再master节点上部署：

（1）创建schduler配置文件
[root@k8s-master cfg]# vim /opt/kubernetes/cfg/kube-scheduler 
KUBE_SCHEDULER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect"

参数说明：
* --master 连接本地apiserver
* --leader-elect 当该组件启动多个时，⾃动选举（HA）

（2）systemd管理scheduler组件
[root@k8s-master cfg]# vim /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-scheduler
ExecStart=/opt/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

（3）设置启动并且开机自启scheduler
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl enable kube-scheduler 
[root@k8s-master ~]# systemctl start kube-scheduler 
[root@k8s-master ~]# systemctl status kube-scheduler

八、部署controller-manager组件（master节点）

controller-manager组件只需要部署master节点上

（1）创建controller-manager配置⽂件
[root@k8s-master ~]# vim /opt/kubernetes/cfg/kube-controller-manager
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect=true \
--address=127.0.0.1 \
--service-cluster-ip-range=10.0.0.0/24 \    ##这是后⾯dns要使⽤的虚拟⽹络，不⽤改，就⽤这个切忌
--cluster-name=kubernetes \
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem  \
--root-ca-file=/opt/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem"

（2）systemd管理controller-manager组件
[root@k8s-master cfg]# vim /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-controller-manager
ExecStart=/opt/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

（3）设置启动并且开机自启controller-manager
[root@k8s-master cfg]# systemctl daemon-reload
[root@k8s-master cfg]# systemctl enable kube-controller-manager
[root@k8s-master cfg]# systemctl start kube-controller-manager
[root@k8s-master cfg]# systemctl status kube-controller-manager.service


(4)查看当前集群组件状态
maste节点的所有组件均已启动成功，通过kubectl去查看当前集群组件状态
[root@k8s-master opt]# /opt/kubernetes/bin/kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-2               Healthy   {"health": "true"}   
etcd-0               Healthy   {"health": "true"}   
etcd-1               Healthy   {"health": "true"}

如上输出说明组件都正常

九、kubelet组件部署(部署在node节点，但是master节点有对应的操作)

Master apiserver启⽤TLS认证后，Node节点kubelet组件想要加⼊集群，必须使⽤CA签发的有效证书才能与apiserver通信，当Node节点很多时，签署证书是⼀件很繁琐的事情，因此有了TLS Bootstrapping机制，kubelet会以⼀个低权限⽤户⾃动向apiserver申请证书，kubelet的证书由 apiserver动态签署。

认证工作流程大致如下:

在这里插入图片描述

1.master节点操作

（1）将kubelet-bootstrap⽤户绑定到系统集群⻆⾊
[root@k8s-master ~]# /opt/kubernetes/bin/kubectl create clusterrolebinding kubelet-bootstrap \
 --clusterrole=system:node-bootstrapper \
 --user=kubelet-bootstrap

（2）创建bootstrap.kubeconfig文件：
注意:在⽣成kubernetes证书的⽬录下执⾏以下命令⽣成bootstrap.kubeconfig⽂件
[root@k8s-master ~]# cd /opt/crt/
[root@k8s-master crt]# KUBE_APISERVER="https://192.168.168.140:6443"    #写你master的ip地址
[root@k8s-master crt]# BOOTSTRAP_TOKEN=674c457d4dcf2eefe4920d7dbb6b0ddc  #之前token文件里的随机字符串

# 设置集群参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=bootstrap.kubeconfig

# 设置客户端认证参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=bootstrap.kubeconfig

# 设置上下⽂参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=bootstrap.kubeconfig

# 设置默认上下⽂
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

（3）创建kube-proxy kubeconfig⽂件
# 设置集群参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=${KUBE_APISERVER} --kubeconfig=kube-proxy.kubeconfig

# 设置客户端认证参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig

# 设置上下⽂参数
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig

# 设置默认上下⽂
[root@k8s-master crt]# /opt/kubernetes/bin/kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

[root@k8s-master crt]# ls *.kubeconfig
bootstrap.kubeconfig  kube-proxy.kubeconfig

(4)将这两个⽂件拷⻉到Node节点/opt/kubernetes/cfg⽬录下
[root@k8s-master crt]# scp *.kubeconfig k8s-node1:/opt/kubernetes/cfg/
[root@k8s-master crt]# scp *.kubeconfig k8s-node2:/opt/kubernetes/cfg/

2.部署kubelet组件(node节点)

（1）将前⾯下载的⼆进制包中的kubelet和kube-proxy拷⻉到node节点的/opt/kubernetes/bin⽬录下
[root@k8s-master bin]# scp -rp kubelet kube-proxy root@k8s-node1:/opt/kubernetes/bin
[root@k8s-master bin]# scp -rp kubelet kube-proxy root@k8s-node2:/opt/kubernetes/bin

（2）在两个node节点创建kubelet配置⽂件
root@k8s-node1 ~]# vim /opt/kubernetes/cfg/kubelet
KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.168.141 \    #每个节点⾃⼰的ip地址
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \
--config=/opt/kubernetes/cfg/kubelet.config \
--cert-dir=/opt/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

root@k8s-node2 ~]# vim /opt/kubernetes/cfg/kubelet
KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.168.142 \
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \
--config=/opt/kubernetes/cfg/kubelet.config \
--cert-dir=/opt/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

[root@k8s-node1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0
[root@k8s-node2 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0
参数说明：
* --hostname-override 在集群中显示的主机名
* --kubeconfig 指定kubeconfig⽂件位置，会⾃动⽣成
* --bootstrap-kubeconfig 指定刚才⽣成的bootstrap.kubeconfig⽂件
* --cert-dir 颁发证书存放位置
* --pod-infra-container-image 管理Pod⽹络的镜像

（3）配置kubelet.config
[root@k8s-node1 ~]# vim /opt/kubernetes/cfg/kubelet.config
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.168.141   #写你机器的ip地址
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS: ["10.0.0.2"]      #不要改，就是这个ip地址
clusterDomain: cluster.local.
failSwapOn: false
authentication:  
  anonymous:    
    enabled: true  
  webhook:    
    enabled: false
    
[root@k8s-node2 ~]# vim /opt/kubernetes/cfg/kubelet.config
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.168.142
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS: ["10.0.0.2"]
clusterDomain: cluster.local.
failSwapOn: false
authentication:  
  anonymous:    
    enabled: true  
  webhook:    
    enabled: false
    
（4）systemd管理kubelet组件
[root@k8s-node1 ~]# vim /usr/lib/systemd/system/kubelet.service 
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet
ExecStart=/opt/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target

[root@k8s-node2 ~]# vim /usr/lib/systemd/system/kubelet.service 
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet
ExecStart=/opt/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target


(5)设置启动和开机自启动kubelet
[root@k8s-node1 ~]# systemctl daemon-reload
[root@k8s-node1 ~]# systemctl enable kubelet
[root@k8s-node1 ~]# systemctl start kubelet

[root@k8s-node2 ~]# systemctl daemon-reload
[root@k8s-node2~]# systemctl enable kubelet
[root@k8s-node2 ~]# systemctl start kubelet

3.在master节点查看集群

[root@k8s-master bin]# /opt/kubernetes/bin/kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-YZjdIekfOYuJ3x2feaUxsghqi4Vr-ThvkSw27OiWfuM   1m        kubelet-bootstrap   Pending
node-csr-qi6YTzISMo_YVNWdJm-LXjotv9ZvdNzdPfmpu3WYwow   2m        kubelet-bootstrap   Pending

这个时候两个节点的状态为pendind，还未加入到集群，需要master节点手动允许以后，节点才加入到集群
[root@k8s-master1 ~]# /opt/kubernetes/bin/kubectl certificate approve XXXXID
注意：xxxid 指的是上⾯的NAME这⼀列

[root@k8s-master bin]# /opt/kubernetes/bin/kubectl certificate approve node-csr-YZjdIekfOYuJ3x2feaUxsghqi4Vr-ThvkSw27OiWfuM
certificatesigningrequest.certificates.k8s.io/node-csr-YZjdIekfOYuJ3x2feaUxsghqi4Vr-ThvkSw27OiWfuM approved
[root@k8s-master bin]# /opt/kubernetes/bin/kubectl certificate approve node-csr-qi6YTzISMo_YVNWdJm-LXjotv9ZvdNzdPfmpu3WYwow
certificatesigningrequest.certificates.k8s.io/node-csr-qi6YTzISMo_YVNWdJm-LXjotv9ZvdNzdPfmpu3WYwow approved

此时再次查看集群，node节点就已经加入到集群中了
[root@k8s-master bin]# /opt/kubernetes/bin/kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-YZjdIekfOYuJ3x2feaUxsghqi4Vr-ThvkSw27OiWfuM   6m        kubelet-bootstrap   Approved,Issued
node-csr-qi6YTzISMo_YVNWdJm-LXjotv9ZvdNzdPfmpu3WYwow   7m        kubelet-bootstrap   Approved,Issued
状态已经变为了 Approved,Issued

注意：每次kubectl都需要需要绝对路径，我们可以做一个软链接
[root@k8s-master bin]# ln -s /opt/kubernetes/bin/kubectl /usr/local/bin/kubectl
[root@k8s-master bin]# kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-YZjdIekfOYuJ3x2feaUxsghqi4Vr-ThvkSw27OiWfuM   9m        kubelet-bootstrap   Approved,Issued
node-csr-qi6YTzISMo_YVNWdJm-LXjotv9ZvdNzdPfmpu3WYwow   9m        kubelet-bootstrap   Approved,Issued


查看集群节点信息：
[root@k8s-master bin]# kubectl get no
NAME              STATUS    ROLES     AGE       VERSION
192.168.168.141   Ready     <none>    24s       v1.11.10
192.168.168.142   Ready     <none>    8m        v1.11.10

十、kube-proxy组件部署(node节点)

（1）创建kube-proxy配置⽂件
[root@k8s-node1 ~]# vim /opt/kubernetes/cfg/kube-proxy
KUBE_PROXY_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.168.141 \   #写每个node节点ip
--cluster-cidr=10.0.0.0/24 \           #不要改，就是这个ip
--kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig"

（2）systemd管理kube-proxy组件
[root@k8s-node1 ~]# vim /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Proxy
After=network.targetrget

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/kube-proxy
ExecStart=/opt/kubernetes/bin/kube-proxy $KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

（3）开机启动和自启动kube-proxy
[root@k8s-node1 ~]# systemctl daemon-reload
[root@k8s-node1 ~]# systemctl enable kube-proxy
[root@k8s-node1 ~]# systemctl start kube-proxy


（4）查看集群节点状态
[root@k8s-master bin]# kubectl get node
NAME              STATUS    ROLES     AGE       VERSION
192.168.168.141   Ready     <none>    17m       v1.11.10
192.168.168.142   Ready     <none>    26m       v1.11.10

（5）查看集群健康状态
[root@k8s-master bin]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-0               Healthy   {"health": "true"}   
etcd-1               Healthy   {"health": "true"}   
etcd-2               Healthy   {"health": "true"}

十一、部署Dashboard（Web UI）

1.部署Pod，提供Web服务

创建⼀个⽬录
[root@k8s-master ~]# mkdir webui
[root@k8s-master ~]# cd webui/

[root@k8s-master webui]# vim dashboard-deployment.yaml 
apiVersion: apps/v1beta2
kind: Deployment
metadata:
  name: kubernetes-dashboard
  namespace: kube-system
  labels:
    k8s-app: kubernetes-dashboard
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile
spec:
  selector:
    matchLabels:
      k8s-app: kubernetes-dashboard
  template:
    metadata:
      labels:
        k8s-app: kubernetes-dashboard
      annotations:
        scheduler.alpha.kubernetes.io/critical-pod: ''
    spec:
      serviceAccountName: kubernetes-dashboard
      containers:
      - name: kubernetes-dashboard
        image: registry.cn-hangzhou.aliyuncs.com/kube_containers/kubernetes-dashboard-amd64:v1.8.1
        resources:
          limits:
            cpu: 100m
            memory: 300Mi
          requests:
            cpu: 100m
            memory: 100Mi
        ports:
        - containerPort: 9090
          protocol: TCP
        livenessProbe:
          httpGet:
            scheme: HTTP
            path: /
            port: 9090
          initialDelaySeconds: 30
          timeoutSeconds: 30
      tolerations:
      - key: "CriticalAddonsOnly"
        operator: "Exists"

2.授权访问apiserver获取信息

[root@k8s-master webui]# vim dashboard-rbac.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
    addonmanager.kubernetes.io/mode: Reconcile
  name: kubernetes-dashboard
  namespace: kube-system
---

kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: kubernetes-dashboard-minimal
  namespace: kube-system
  labels:
    k8s-app: kubernetes-dashboard
    addonmanager.kubernetes.io/mode: Reconcile
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kube-system

3.发布服务，提供对外访问

[root@k8s-master webui]# vim dashboard-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: kubernetes-dashboard
  namespace: kube-system
  labels:
    k8s-app: kubernetes-dashboard
    kubernetes.io/cluster-service: "true"
    addonmanager.kubernetes.io/mode: Reconcile
spec:
  type: NodePort
  selector:
    k8s-app: kubernetes-dashboard
  ports:
  - port: 80
    targetPort: 9090

[root@k8s-master webui]# /opt/kubernetes/bin/kubectl create -f dashboard-rbac.yaml
[root@k8s-master webui]# /opt/kubernetes/bin/kubectl create -f dashboard-deployment.yaml
[root@k8s-master webui]# /opt/kubernetes/bin/kubectl create -f dashboard-service.yaml
等待数分钟，查看资源状态：

查看名称空间：
[root@k8s-master webui]# /opt/kubernetes/bin/kubectl get all -n kube-system
NAME                                       READY     STATUS    RESTARTS   AGE
pod/kubernetes-dashboard-d9545b947-2pbcm   1/1       Running   0          22s

NAME                           TYPE       CLUSTER-IP   EXTERNAL-IP   PORT(S)        AGE
service/kubernetes-dashboard   NodePort   10.0.0.152   <none>        80:34455/TCP   13s

NAME                                   DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/kubernetes-dashboard   1         1         1            1           22s

NAME                                             DESIRED   CURRENT   READY     AGE
replicaset.apps/kubernetes-dashboard-d9545b947   1         1         1         22s


查看指定命名空间的服务
[root@k8s-master webui]# /opt/kubernetes/bin/kubectl get svc -n kube-system
NAME                   TYPE       CLUSTER-IP   EXTERNAL-IP   PORT(S)        AGE
kubernetes-dashboard   NodePort   10.0.0.152   <none>        80:34455/TCP   1m

访问node节点的ip

在这里插入图片描述

十二、测试

创建⼀个Nginx Web，判断集群是否正常⼯作

[root@k8s-master webui]# kubectl run nginx --image=daocloud.io/nginx --replicas=3      ####指定副本数为3
deployment.apps/nginx created
[root@k8s-master webui]# kubectl expose deployment nginx --port=88 --target-port=80 --type=NodePort  ###暴露端口  
service/nginx exposed
[root@k8s-master webui]# kubectl get pods    ####稍微等一会       
NAME                     READY     STATUS              RESTARTS   AGE
nginx-6648ff9bb4-ch22m   0/1       ContainerCreating   0          27s
nginx-6648ff9bb4-hpvxk   0/1       ContainerCreating   0          27s
nginx-6648ff9bb4-qmt5z   0/1       ContainerCreating   0          27s

[root@k8s-master webui]# kubectl get pods     ###查看Pod，Service
NAME                     READY     STATUS    RESTARTS   AGE
nginx-6648ff9bb4-ch22m   1/1       Running   0          2m
nginx-6648ff9bb4-hpvxk   1/1       Running   0          2m
nginx-6648ff9bb4-qmt5z   1/1       Running   0          2m

查看pod详细信息，比如nginx-6648ff9bb4-ch22m
[root@k8s-master webui]# kubectl describe pod nginx-6648ff9bb4-ch22m
Name:               nginx-6648ff9bb4-ch22m
Namespace:          default
Priority:           0
PriorityClassName:  <none>
Node:               192.168.168.142/192.168.168.142
Start Time:         Sun, 11 Aug 2024 06:03:29 +0800
Labels:             pod-template-hash=2204995660
                    run=nginx
Annotations:        <none>
Status:             Running
IP:                 172.42.93.3
Controlled By:      ReplicaSet/nginx-6648ff9bb4
Containers:
  nginx:
    Container ID:   docker://46e7e48179d0d51e42bac49d5760eaebcf4e1f9470d33491db81426866616d24
    Image:          daocloud.io/nginx
    Image ID:       docker-pullable://daocloud.io/nginx@sha256:48d56bae87c65ca642b0a1d13c3dc97c4430994991e5531ff123f77cdf975fae
    Port:           <none>
    Host Port:      <none>
    State:          Running
      Started:      Sun, 11 Aug 2024 06:04:05 +0800
    Ready:          True
    Restart Count:  0
    Environment:    <none>
    Mounts:
      /var/run/secrets/kubernetes.io/serviceaccount from default-token-wkw4h (ro)
Conditions:
  Type              Status
  Initialized       True 
  Ready             True 
  ContainersReady   True 
  PodScheduled      True 
Volumes:
  default-token-wkw4h:
    Type:        Secret (a volume populated by a Secret)
    SecretName:  default-token-wkw4h
    Optional:    false
QoS Class:       BestEffort
Node-Selectors:  <none>
Tolerations:     node.kubernetes.io/not-ready:NoExecute for 300s
                 node.kubernetes.io/unreachable:NoExecute for 300s
Events:
  Type    Reason     Age   From                      Message
  ----    ------     ----  ----                      -------
  Normal  Scheduled  5m    default-scheduler         Successfully assigned default/nginx-6648ff9bb4-ch22m to 192.168.168.142
  Normal  Pulling    5m    kubelet, 192.168.168.142  pulling image "daocloud.io/nginx"
  Normal  Pulled     5m    kubelet, 192.168.168.142  Successfully pulled image "daocloud.io/nginx"
  Normal  Created    5m    kubelet, 192.168.168.142  Created container
  Normal  Started    5m    kubelet, 192.168.168.142  Started container

[root@k8s-master webui]# kubectl get svc
NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)        AGE
kubernetes   ClusterIP   10.0.0.1     <none>        443/TCP        4h
nginx        NodePort    10.0.0.254   <none>        88:37683/TCP   8m

访问nodeip加端⼝

打开浏览器输⼊：http://192.168.168.142:37683

在这里插入图片描述