在网上下了一个原版的xp-sp3系统,于是把本本重新分区装系统,安装一切顺利,驱动打好后(最后打的显卡驱动,显卡为ati mobility radeon 7500)重新启动系统,xp滚动条结束后进入系统很慢,画面黑屏,硬盘指示灯微亮闪烁慢,等了大概10秒发现电脑蓝屏,提示ati2dvag错误,错误代码为:
A problem has been detected and windows has been shut down to pevent damage to your computer.
The problem seems to be caused by the following file:ati2dvag
If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these step:
The devices drivers got stuck in an infinite loop.This usually indicates problem with device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates
Techical informations:
*** STOP 0x0000000A(0x8289BA10,0x825A9008,0xF88DFCB4,0x00000001)
ati2dvag
大致是说:(google翻译)
已检测到一个问题,Windows已经被关闭pevent损害您的计算机。
这个问题似乎引起的下列文件:ati2dvag
如果这是你第一次看到此停止错误屏幕,重新启动您的computer.If此屏幕再次出现,请按照下列步骤:
司机得到停留在一个无限的loop.This的设备通常表示与设备本身或与设备驱动程序编程硬件不当的问题。
请检查您的硬件设备供应商所有驱动程序更新
介绍技术信息:
***停止0x0000000A(0x8289BA10,0x825A9008,0xF88DFCB4,0x00000001)
ati2dvag
因为以前的系统用的都很好,估计是显卡驱动的问题,进入安全模式后卸载显卡驱动,重新启动系统,可以进入系统,在网上重新找了一个新的显卡驱动,安装重启后依然蓝屏。
在网上找了找关于 ati2dvag 蓝屏的代码,有一条可以成功解决问题:
重启按 F8 进入安全模式:
1. 启动 "设备管理器"。
2. 在系统设备中,选择 "Intel(R) ... Processor to AGP Controller..."。
3. 右键菜单,选择 "更新驱动程序"。
4. 不要从 Windows Update 更新,继续下一步。
5. 对话框中选择 "从列表或指定位置安装(高级)",下一步。
6. 选择 "不要搜索。我要自己选择要安装的驱动程序",下一步。
7. 选择 "PCI Standard PCI-to-PCI bridge",下一步,安装驱动程序。
8. 重启系统。OK。