具体过程如下: [ddt@localhost softwear]$ sh check.sh Detected configuration: Architecture: i686 (32-bit) X Server: Xorg 6.8.1 检查完后 下了一个x.org 6.8 的 rpm -uvh --nodeps fglrx_6_8_0-8.12.10-1.i386.rpm 提示冲突 libGL 删了原来哪个 就好了 装完后 配fglrxconfig基本默认 ============================================================================== ATI - FIRE GL - BE THE CREATOR ============================================================================== This program will create the ATI "xorg.conf" file - based on your selections - for the below listed boardtypes... - ATI Radeon 8500 / 9100 - ATI FireGL 8700 / 8800 / E1 - ATI FireGL T2 - ATI Radeon 9000 - ATI Radeon 9200 - ATI Radeon 9500 - ATI Radeon 9600 - ATI Radeon 9700 - ATI Radeon 9800 - ATI FireGL Z1 / X1 / X2 - ATI Mobility M9 - ATI Mobility FireGL 9000 - ATI Mobility M9PLUS The "xorg.conf" file usually resides in /etc/X11. Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort. ============================================================================== Mouse ============================================================================== Specify the mouse port type. Choose one from the following list: 1. Serial Port 2. PS/2 or USB with PS/2 protocol 3. Inport Bus Enter the number for your port type: [2] Specify the mouse model. Choose one from the following list: 1. PS/2 Mouse (X11 generic ps/2 mouse driver) 2. PS/2 Wheel Mouse (X11 generic ps/2 wheel mouse driver) 3. Microsoft Intellimouse (PS2) 4. Microsoft IntelliMouse Explorer (PS2) 5. Kensington ThinkingMouse (PS2) 6. Logitech MouseManPlus (PS2) 7. Alps Glidepoint PS/2 Touchpad 8. Genius NetMouse 9. Genius NetScroll Enter the number for your mouse model: [2] If your mouse has only two buttons, it is recommended that you enable Emulate3Buttons. Do you want to enable Emulate3Buttons (y/n)? [n] Now give the full device name that the mouse is connected to, for example /dev/tty00 or /dev/mouse or /dev/psaux (includes IBM Laptops). Mouse device: [/dev/input/mice] ============================================================================== Keyboard ============================================================================== Please select one of the following keyboard types that is the better description of your keyboard. If nothing really matches, choose 1 (Generic 101-key PC) 1. Generic 101-key PC 2. Generic 102-key (Intl) PC 3. Generic 104-key PC 4. Generic 105-key (Intl) PC 5. Dell 101-key PC 6. Everex STEPnote 7. Keytronic FlexPro 8. Microsoft Natural 9. Northgate OmniKey 101 10. Winbook Model XP5 11. Japanese 106-key 12. PC-98xx Series Enter a number to choose the keyboard type: [1] Please select the layout corresponding to your keyboard 1. U.S. English 2. U.S. English w/ISO9995-3 3. Belgian 4. Bulgarian 5. Canadian 6. Czechoslovakian 7. German 8. Swiss German 9. Danish 10. Spanish 11. Finnish 12. French 13. Swiss French 14. United Kingdom 15. Hungarian 16. Italian 17. Japanese 18. Norwegian Press [Enter] for the next page or enter the number for your keyboard layout country: 1 ============================================================================== FireGL Display Settings ============================================================================== Quad Buffer Stereo ("Active Stereo"): This driver does support Quad Buffer Stereo ("Active Stereo") in combination with a CRT monitor (refresh rate abt. 100 to 120 Hz) and the appropiate stereo viewing subsystem hardware. This can be e.g. a shutter glasses system (infrared or wired) or an active polarisation device paired with passive stereo polarization glasses. Do you want to enable "Quad Buffer Stereo" (y/n)? [n] ============================================================================== TV out Configuration ============================================================================== Do you want to enable TV out (y/n)? [n] ============================================================================== FireGL Screen Layout ============================================================================== ------------------------------------------------------------------------------ | Maximum resolution for OpenGL operation | | | | - R200 chip family (Radeon 8500-9100 Pro, FireGL 8700/8800/E1): | | 2048x2048 | | - R300 chip family (Radeon 9500-9700 Pro, FireGL T2/Z1/X1/X2): | | 2560x2560 | ------------------------------------------------------------------------------ Choose configuration from the list below 1. Single Head (1 screen, second dark) 2. Laptop Mode (Ability to toggle between internal / external screen) 3. Clone Mode (2 screens - same content) 4. Big Desktop (2 screens - one framebuffer) 5. Dual Head (2 screens - two drivers) Enter the number for your configuration: [1] ============================================================================== Single Head selected ============================================================================== ============================================================================== Monitor Settings ============================================================================== Now we want to set the specifications of the monitor(s). The two critical parameters are the vertical refresh rate, which is the rate at which the the whole screen is refreshed, and most importantly the horizontal sync rate, which is the rate at which scanlines are displayed. The valid range for horizontal sync and vertical sync should be documented in the manual of your monitor. If in doubt, check the monitor database /usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there. Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort. You must indicate the horizontal sync range of your monitor. You can either select one of the predefined ranges below that correspond to industry- standard monitor types, or give a specific range. It is VERY IMPORTANT that you do not specify a monitor type with a horizontal sync range that is beyond the capabilities of your monitor. If in doubt, choose a conservative setting. hsync in kHz; monitor type with characteristic modes 1. 31.5 ; up to 640x480 @ 60 Hz (VGA) 2. 31.5 - 37.9; up to 800x600 @ 60 Hz (SVGA) 3. 31.5 - 48.4; up to 1024x768 @ 60 Hz (XGA) 4. 31.5 - 60.0; up to 1024x768 @ 75 Hz (XGA) 5. 31.5 - 68.7; up to 1024x768 @ 85 Hz (XGA) 6. 31.5 - 80.5; up to 1280x1024 @ 75 Hz (SXGA) 7. 31.5 - 91.1; up to 1280x1024 @ 85 Hz (SXGA) 8. Enter your own horizontal sync range Enter your choice (1-8): [1] 5 You must indicate the vertical sync range of your monitor. You can either select one of the predefined ranges below or give a specific range. 1. 20 - 60 (e.g. slow scan flat panels with DVI cable) 2. 50 - 70 (VGA) 3. 60 - 75 4. 60 - 85 5. 60 - 100 6. Specify your own vertical sync range Enter your choice: [1] 2 ============================================================================== Display Modes ============================================================================== The default resolution that the server will start-up with will be the first listed mode that can be supported by the monitor and card. Currently it is set to: "640x480" for 24-bit Modes that cannot be supported due to monitor or clock constraints will be automatically skipped by the server. 1. Change the modes for 24-bit (24-bit color) 2. The modes are OK, continue. Enter your choice: 2 You can have a virtual screen (desktop), which is screen area that is larger than the physical screen and which is panned by moving the mouse to the edge of the screen. The largest resolution in the modelist is used for any of the listed resolution with less dimensions. Each color depth can have a differently-sized virtual screen. Virtual screens resolutions are set for each color depth separately. Note: This grafics adapter will always select the maximum x and y resolution as the default virtual desktop resolution. This complies with general X11 specifications. see "man XF86Config". Do you want to use a virtual desktop where the dimensions are bigger than your maximum x and y screen resolution? (y/n) [n] ============================================================================== Direct Rendering Interface Restrictions ============================================================================== Please specify which restriction sheme you want to implement: 1. no restrictions - any user has access to the OpenGL ICD 2. limited to group 'users' - only group members can access the OpenGL ICD 3. limited to group 'root' - only group members can access the OpenGL ICD 4. limited to group 'video' - only group members can access the OpenGL ICD 5. limited to group 'dri' - only group members can access the OpenGL ICD Enter the number for your default user restrictions: [1] ============================================================================== Application Profiles ============================================================================== Please select application specific profile: 1. Default 2. Individual Configuration of Capabilities 3. Maya 4. SOFTIMAGE|XSI 5. SOFTIMAGE|3D 6. Houdini 4.0 7. Houdini 5.0 8. Houdini 5.5 Enter the number for your profile: [1] ============================================================================== Advanced Graphics Features Settings ============================================================================== Do you want to initialize xfree86-dga (y/n)? [n] Do you want to export pseudo color visuals (y/n)? [n] Do you want to synchronize buffer swaps with the vertical sync signal (y/n)? [n] ============================================================================== Full Scene Anti Aliasing (FSAA) ============================================================================== Please select multi sample visuals you want to share: 1 = All (Visuals for 2,4 and 6 Samples per Pixel) 2 = Visuals for 2 Samples per Pixel 4 = Visuals for 4 Samples per Pixel 6 = Visuals for 6 Samples per Pixel Please enter: [1] Do you want to force multi sample visuals for every OpenGL application? (y/n)? [n] Disable FSAA Gamma (y/n)? [n] Customize FSAA Multi Sample Position (y/n)? [n] ============================================================================== Advanced OS Settings ============================================================================== External AGPGART module: It is possible (but not recommended) to turn off the usage of built-in agp support of the provided fglrx kernel module and use the external AGP GART module (agpgart.o) of the Linux kernel. If you want to use the external module then ensure that it loads prior to the drivers full startup. In order to manually load the external agpgart module execute this on the commandline (as root): /sbin/insmod agpgart or alternatively configure your system to auto load the module. Do you want to use the external AGP GART module (y/n)? [n] AGP Locked User Pages The grafics driver is able to read and write textures and bitmaps trough AGP mapped and locked views of the main memory for the application's mem space. Performing those mapping task depends on several successfull interaction steps with the Linux kernel. A failure in this process might lead to some messages in the kernel log. If these kernel functions are failing silently or in case of other heavy incompatibility (e.g. a new kernel memory manger) then there is a high chance that the system will hang as soon as the graphics adpater wants to read from assumed but nor really mapped memory location. If you do see that the advanced fgl_glxgears application halts your session whilst the simple glxgears does run nicely then please disable this feature. If you do see lots of notifications about failed kernel calls for mem locking then please disable this feature and re-check the kernel message log. Do you want to enable "AGP Locked User Pages" (y/n)? [y] TLS Method: *** this only applys to the FireGL workstation boards *** The grafics driver supports two different methods of thread local storage. The first method is fast but might immediately abort when used with WineX, VM emulators or some other advanced programming tools. The second method is up to 10% slower in a few rendering cases but does nicely cope with any sort of exotic software. For more details on this topic, please see the readme. If not totally sure about your needs, then please select "0 - default". 0 - default (FireGL workstation boards: fast) 1 - fast operation (only for standard gnu C/C++ OpenGL applications) 2 - compatible operation (for WineX, VM emulators and some profilers) Which storage method do you want to use? [0] ============================================================================== Finish ============================================================================== I am going to write the xorg.conf file now. Make sure you don't accidently overwrite a previously configured one. Shall I write it to '/etc/X11/xorg.conf' (y/n)? y Probing PCI bus for a supported graphics device... unable to find any of the subsequent graphics boards: - ATI Radeon 8500 / 9100 - ATI FireGL 8700 / 8800 - ATI FireGL E1 - ATI FireGL T2 - ATI Radeon 9000 - ATI Radeon 9200 - ATI Radeon 9500 - ATI Radeon 9600 - ATI Radeon 9700 - ATI Radeon 9800 - ATI FireGL Z1 / X1 / X2 - ATI Mobility M9 - ATI Mobility FireGL 9000 - ATI Mobility M9PLUS When starting X11 then auto-detection will take place. If you want forced binding to a specific PCI bus slot at a later time then you have to edit the fglrx-BusID entry in your xorg.conf file. Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort. File has been written. Take a look at it before running 'startx'. Note that the xorg.conf file must be in one of the directories searched by the server (e.g. /etc/X11) in order to be used. Within the server press ctrl, alt and 'Num+' or 'Num-' simultaneously to cycle video resolutions. Pressing ctrl, alt and backspace simultaneously immediately exits the server. Use these keys if the monitor doesn't sync for a particular mode. For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config.
关于ati显卡在linux下的配置问题
最新推荐文章于 2023-05-26 18:05:50 发布