k8s系列 之 pod网络类型 pod网络基础

k8s pod的4种网络模式最佳实战
https://www.freesion.com/article/16341198221/

一 hostPort相当于docker run -p 8081:8080,不用创建svc,因此端口只在容器运行的vm上监听 缺点: 没法多pod负载

$ cat pod-hostport.yaml 
apiVersion: v1
kind: Pod
metadata:
  name: webapp
  labels:
    app: webapp
spec:
  containers:
  - name: webapp
    image: tomcat
    ports:
    - containerPort: 8080
      hostPort: 8081
 
 
$ kubectl get po --all-namespaces -o wide --show-labels
NAMESPACE       NAME                                        READY     STATUS    RESTARTS   AGE       IP               NODE        LABELS
default         webapp                                      1/1       Running   0          5s        10.2.100.3       n2.ma.com   app=webapp
 
 
[root@n2 ~]# docker ps -a
CONTAINER ID        IMAGE                                      COMMAND                  CREATED             STATUS              PORTS                    NAMES
59e72c92ba55        tomcat                                     "catalina.sh run"        2 minutes ago       Up 2 minutes                                 k8s_webapp_webapp_default_932c613e-e2dc-11e7-8313-00505636c956_0
0fe8c2f08e03        gcr.io/google_containers/pause-amd64:3.0   "/pause"                 2 minutes ago       Up 2 minutes        0.0.0.0:8081->8080/tcp   k8s_POD_webapp_default_932c613e-e2dc-11e7-8313-00505636c956_0

hostNetwork相当于 docker run --net=host ,不用创建svc,因此端口只在容器运行的vm上监听 缺点: 没法多pod负载

apiVersion: v1
kind: Pod
metadata:
  name: webapp
  labels:
    app: webapp
spec:
  hostNetwork: true
  containers:
  - name: webapp
    image: tomcat
    ports:
    - containerPort: 8080
 
    
$ kubectl get po --all-namespaces -o wide --show-labels
NAMESPACE       NAME                                        READY     STATUS    RESTARTS   AGE       IP               NODE        LABELS
default         webapp                                      1/1       Running   0          36s       192.168.x.x      n2.ma.com   app=webapp
 
 
查看该pod的网卡, 发现和宿主机一致
$ docker exec -it b8a1e1e35c3e ip ad
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:50:56:33:13:b6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.14.133/24 brd 192.168.14.255 scope global dynamic eth0
       valid_lft 5356021sec preferred_lft 5356021sec
    inet6 fe80::250:56ff:fe33:13b6/64 scope link 
       valid_lft forever preferred_lft forever
3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default 
    link/ether 02:42:41:e8:f5:22 brd ff:ff:ff:ff:ff:ff
    inet 10.2.100.1/24 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:41ff:fee8:f522/64 scope link 
       valid_lft forever preferred_lft forever
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default 
    link/ether ae:4a:e1:f9:52:ea brd ff:ff:ff:ff:ff:ff
    inet 10.2.100.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
    inet6 fe80::ac4a:e1ff:fef9:52ea/64 scope link 
       valid_lft forever preferred_lft forever
244: veth007dbe6@if243: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue master docker0 state UP group default 
    link/ether f2:02:e1:a2:9f:8a brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet6 fe80::f002:e1ff:fea2:9f8a/64 scope link 
       valid_lft forever preferred_lft forever

NodePort-svc级别,由kube-proxy操控,所有节点规则统一,逻辑上市全局的

因此,svc上的nodeport会监听在所有的节点上(如果不指定,即是随机端口,由apiserver指定–service-node-port-range ‘30000-32767’),即使有1个pod,任意访问某台的nodeport都可以访问到这个服务

$ cat nginx-deployment.yaml 
apiVersion: apps/v1beta1 # for versions before 1.8.0 use apps/v1beta1
kind: Deployment
metadata:
  name: mynginx
  labels:
    app: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx
        ports:
        - containerPort: 80
        
$ cat nginx-svc.yaml 
kind: Service
apiVersion: v1
metadata:
  name: mynginx
spec:
  type: NodePort
  selector:
    app: nginx
  ports:
  - protocol: TCP
    port: 8080
    nodePort: 8080
    targetPort: 80
 
 
$ kubect get pod --show-lables -o wide
NAMESPACE       NAME                                        READY     STATUS    RESTARTS   AGE       IP               NODE        LABELS
default         mynginx-31893996-f8bn7                      1/1       Running   0          12m       10.2.100.2       n2.ma.com   app=nginx,pod-template-hash=31893996
 
$ kubectl get svc --show-lables -o wide
NAMESPACE       NAME                   CLUSTER-IP       EXTERNAL-IP   PORT(S)          AGE       SELECTOR
default         mynginx                10.254.173.173   <nodes>       8080:31277/TCP   9m        app=nginx
 
 

externalIPs ： 通过svc创建,在指定的node上监听端口

适用场景: 想通过svc来负载,但要求某台指定的node上监听,而非像nodeport所有节点监听.

telnet 192.168.2.12 80
此时只能是 externalIPs指定的IP，而且也不需要type指定类型

[root@n1 external-ip]# cat nginx-deployment.yaml 
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: nginx-deployment
  labels:
    app: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: nginx
        ports:
        - containerPort: 80
 
 
[root@n1 external-ip]# cat nginx-svc.yaml 
apiVersion: v1
kind: Service
metadata:
  name: svc-nginx
spec:
  selector:
    app: nginx
  ports:
  - protocol: TCP
    port: 80
  externalIPs: 
    - 192.168.2.12 #这是我的一台node的ip
 
    
- 这个端口是kube-proxy来启动的,所以只有运行kube-proxy的    
[root@n2 ~]# netstat -ntulp       
tcp        0      0 192.168.2.12:80         0.0.0.0:*               LISTEN      11465/kube-proxy