Openwrt编译进阶

最新推荐文章于 2024-08-23 15:40:43 发布
最新推荐文章于 2024-08-23 15:40:43 发布
阅读量2.2k 收藏
点赞数
分类专栏： opewrt 文章标签： openwrt lua

http://lotors.me/2014/08/16/opcompilepro/#more

摘要： 这篇文章是Openwrt编译的学习笔记包括（1）Openwrt基础入门（2）Openwrt基础进阶（3）集成软件

之前总喜欢在在写文章之前写一大段自己的光荣事迹，后来发现看别人这样写的文章是一件很蛋疼的事，毕竟这是一篇技术类文章，不是小学生日记。
好吧，这次直接进入正题，抱歉，又写了一段和本文内容无关的文字……
去年学校开始用H3C认证来限制我们上网，于是好奇心再次害死猫，本宫终于修成正果，误入Openwrt这个大坑，折腾Openwrt有一年多了，到了回馈社会的时候了，这篇文章写写Openwrt编译的一些高级配置（相对入门级编译教程而言），以HG255D为例。

Openwrt基础编译

这类文章一手一大把，精简的，详细的（多半是废话）都有，这里就简单的把一些指令写下

编译环境为Ubuntu
#升级组件包
sudo apt-get update
#安装编译需要的组件
sudo apt-get install gcc g++ binutils patch bzip2 flex bison make autoconf gettext texinfo unzip sharutils subversion libncurses5-dev ncurses-term zlib1g-dev git-core gawk asciidoc libz-dev sphinxsearch libtool sphinx-common libssl-dev libsqlite3* intltool libiconv* gstreamer-0.10* glib2.0 libxml2-dev qemu
（*64位系统需安装ia32-libs）
#使用非root用户登录，建立openwrt目录
mkdir openwrt
#进入openwrt目录
cd openwrt
#下载openwrt源码
svn checkout svn://svn.openwrt.org/openwrt/trunk
#赋予trunk目录权限
sudo chmod -R 777 trunk
#进入trunk目录
cd trunk
#更新最新源码
./scripts/feeds update -a
#安装最新源码
./scripts/feeds install -a
#更新版本号
svn up
#进入编译菜单
make menuconfig
Y：选择Y，该软件将被编译，并且加入到你的目标固件里；
M：选择M，该软件包将会被编译，但不会被放入固件里。在需要它的时候，可以用OPKG软件包管理器进行安装；
N：选择N，该软件包将不会被编译，也不会被安装进固件。
方向键是移动光标
回车键是确认
空格键是选择，可以代替Y/M/N键的使用
/:搜索
#编译
make V=99
#清除编译过程产生的临时文件
make clean
#恢复编译环境
make defconfig

Openwrt编译进阶

其实按照上面的指令一路执行下来，你已经能够在/bin/$target下找到刷机固件了,是不是很简单……

修改WIFI设置

package/kernel/mac80211/files/lib/wifi/mac80211.sh

config wifi-device  radio$devidx
    option type     mac80211
    option channel  11
    option hwmode    11ng
    option path    '10180000.wmac'
    option htmode    HT20
    list ht_capab    GF
    list ht_capab    SHORT-GI-20
    list ht_capab    SHORT-GI-40
    list ht_capab    TX-STBC
    list ht_capab    RX-STBC12
    # REMOVE THIS LINE TO ENABLE WIFI:
    option disabled 0
    option noscan 1
    option txpower 20
    option htmode HT40-

config wifi-iface
    option device   radio$devidx
    option network  lan
    option mode     ap
    #自定义SSID为MakeBlaze_MAC后六位
    option ssid     MakeBlaze_$(cat /sys/class/ieee80211/${dev}/macaddress|awk -F ":" '{print $4""$5""$6 }'| tr a-z A-Z) 
    option encryption none

修改LUCI

修改LUCI界面配置

feeds/luci/modules/base/root/etc/config/luci

config core main
    option resourcebase '/luci-static/resources'
    #设置默认语言
    option lang 'zh_cn'
    #设置默认主题
    option mediaurlbase '/luci-static/bootstrap'

#设置可选择的语言        
config internal languages
    option zh_cn 'chinese'
    option en 'English'
#设置可选择的主题
config internal themes
    option Bootstrap '/luci-static/bootstrap'

添加释放内存

feeds/luci/modules/admin-full/luasrc/controller/admin/index.lua

function index()
+    entry({"admin", "Free_Memory"}, call("Free_Memory"), _("释放内存"), 75)
end

function Free_Memory()
    luci.util.exec("echo 3 > /proc/sys/vm/drop_caches")
    luci.http.redirect(luci.dispatcher.build_url("admin", "status", "overview"))
end

在顶栏显示重启

feeds/luci/modules/admin-full/luasrc/controller/admin/system.lua

function index()
    entry({"admin", "reboot"}, call("action_reboot"), _("Reboot"), 90)
end

feeds/luci/modules/admin-full/luasrc/view/admin_system/reboot.htm

<%:Perform reboot%>

在顶栏显示备份/升级

feeds/luci/modules/admin-full/luasrc/controller/admin/system.lua

function index()
    entry({"admin", "flashops"}, call("action_flashops"), _("Backup / Flash Firmware"), 70)
end

修改配置文件

package/base-files/files/etc/
在这个目录里，你可以把你的备份的路由器导入进来

修改root密码

package/base-files/files/etc/shadow

#默认情况下root是没有密码的，需设定密码才能开启ssh
root:$1$wEehtjxj$YBu4quNfVUjzfv8p/PBo5.:0:0:99999:7:::

修改路由连接数

package/base-files/files/etc/sysctl.conf

net.netfilter.nf_conntrack_max=65535

修改主机名，设定时区

package/base-files/files/etc/config/system

config system
    #设置主机名
    option hostname 'MakeBlaze'
    option conloglevel '8'
    option cronloglevel '8'
    #设置时区
    option zonename 'Asia/Shanghai'
    option timezone 'CST-8'

#设置时间服务器
config timeserver 'ntp'
    option enable_server '1'
    list server '210.72.145.44'
    list server 's1a.time.edu.cn'
    list server 's1b.time.edu.cn'
    list server '202.120.2.101'

config led 'usb_led'
    option name 'USB'
    option sysfs 'hg255d:usb'
    option trigger 'usbdev'
    option dev '1-1'
    option interval '50'

config led 'wlan_led'
    option name 'WLAN'
    option sysfs 'hg255d:wlan'
    option trigger 'netdev'
    option dev 'ra0'
    option mode 'link tx'

config led 'internet_led'
    option name 'INTERNET'
    option sysfs 'hg255d:internet'
    option trigger 'netdev'
    option dev 'eth0.2'
    option mode 'tx rx'

SAMBA免密码访问

package/base-files/files/etc/config/samba

config samba
    #显示中文
    option charset 'gb2312'

config sambashare
    option read_only 'no'
    option guest_ok 'yes'
    option create_mask '0777'
    option dir_mask '0777'
    option display charset

package/base-files/files/etc/samba/smb.conf.template

[global]
    netbios name = |NAME| 
    display charset = |CHARSET|
    interfaces = |INTERFACES|
    server string = |DESCRIPTION|
    unix charset = |CHARSET|
    workgroup = |WORKGROUP|
    browseable = yes
    deadtime = 30
    domain master = yes
    encrypt passwords = true
    enable core files = no
    guest account = root
    guest ok = yes
    #invalid users = root
    local master = yes
    load printers = no
    map to guest = Bad User
    max protocol = SMB2
    min receivefile size = 16384
    null passwords = yes
    obey pam restrictions = yes
    os level = 20
    passdb backend = smbpasswd
    preferred master = yes
    printable = no
    security = share
    smb encrypt = disabled
    #smb passwd file = /etc/samba/smbpasswd
    socket options = TCP_NODELAY IPTOS_LOWDELAY
    syslog = 2
    use sendfile = yes
    writeable = yes

集成软件

添加aria2，luci添加，web管理界面

aria2 http://sourceforge.net/projects/aria2/files/stable/

#aria2的依赖安装
sudo apt-get update 
sudo apt-get install autoconf automake libcppunit-dev autopoint openssl libtool sphinx-common sphinxsearch libgcrypt11-dev 
#下载aria2源码
cd dl
sudo apt-get install wget
wget http://sourceforge.net/projects/aria2/files/stable/aria2-1.18.7/aria2-1.18.7.tar.bz2
#获取md5码
md5sum aria2-1.18.7.tar.bz2
#添加luci-aria2

这里用的是南浦月的luci-app-aira2和webui-aria2
OpenWrt-Extra https://github.com/nanpuyue/openwrt-extra

在feeds.conf.default中添加`src-git extra git://github.com/nanpuyue/openwrt-extra.git`
./scripts/feeds update -a
./scripts/feeds install -a

在make menuconfig中选中aria2，luci-app-aira2和webui-aria2就可以了

添加将自己开发的程序

在package下建立一个文件夹，以自己的项目命名，里边包括一个files文件夹和一个Makefile文件

目录结构
<ccnu>
├Makefile
├<files>
│  ├<etc>
│  │  ├<config>
│  │  │  └ccnu
│  │  ├<init.d>
│  │  │  └ccnu
│  ├<usr>
│  │  ├<lib>
│  │  │  ├<lua>
│  │  │  │  ├<luci>
│  │  │  │  │  ├<controller>
│  │  │  │  │  │  └ccnu.lua
│  │  │  │  │  ├<model>
│  │  │  │  │  │  ├<cbi>
│  │  │  │  │  │  │  └ccnu.lua
│  │  ├<sbin>
│  │  │  └ccnu

package/ccnu/Makefile

include $(TOPDIR)/rules.mk

PKG_NAME:=ccnu
PKG_VERSION:=2.0.1        
PKG_RELEASE:=1
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)

include $(INCLUDE_DIR)/package.mk

define Package/ccnu
  SECTION:=utils
  CATEGORY:=Utilities
  SUBMENU:=H3C inode
  TITLE:= iNode Compatible Client for CCNU
  DEPENDS:=+libc +libgcc 
  MAINTAINER:= RiceLyn <fjkfwz@gmail.com>
endef

define Package/ccnu/description
    iNode Compatible Client for CCNU
endef

define Build/Prepare
endef

define Build/Configure
endef

define Build/Compile
endef

define Package/ccnu/install
    $(CP) ./files/* $(1)/
endef

$(eval $(call BuildPackage,ccnu))

之后./scripts/feeds install -a,ccnu就会出现在Utilities -> H3C inode里啦
这里先做一个简单的程序，以后会写文章详细介绍。

HG255D个性化配置

开启HG255D编译

/target/linux/ramips/image/Makefile去除HG255D前的#

Image/Build/Profile/HG255D=$(call BuildFirmware/Default16M/$(1),$(1),hg255d,HG255D)
$(call Image/Build/Profile/HG255D,$(1))

make menuconfig配置

#选择编译对象
Target System (Ralink RT288x/RT3xxx)    —>
Subtarget (RT3x5x/RT5350 based boards)  —>
Target Profile (HuaWei HG255D)          —>

#添加USB挂载
Base system —> <*>block-mount   

#添加硬盘格式支持
Kernel modules —> Filesystems —> <*> kmod-fs-ext4 (移动硬盘EXT4格式选择)
Kernel modules —> Filesystems —> <*> kmod-fs-vfat(FAT16 / FAT32 格式 选择)
Kernel modules —> Filesystems —> <*> kmod-fs-ntfs (NTFS 格式 选择)

#添加USB相关支持
Kernel modules —> USB Support —> <*> kmod-usb-core.
Kernel modules —> USB Support —> <*> kmod-usb-ohci.
Kernel modules —> USB Support —> <*> kmod-usb-storage.
Kernel modules —> USB Support —> <*> kmod-usb-storage-extras.
Kernel modules —> USB Support —> <*> kmod-usb2.
Kernel modules —> USB Support —> <*> kmod-usb3.

#添加自动挂载工具
Utilities —> Filesystem —> <*> badblocks

#添加UTF8编码,CP437编码，ISO8859-1编码
Kernel modules —> Native Language Support —> <*> kmod-nls-cp437
Kernel modules —> Native Language Support —> <*> kmod-nls-iso8859-1
Kernel modules —> Native Language Support —> <*> kmod-nls-utf8

#添加SCSI支持
Kernel modules —> Block Devices —> <*>kmod-scsi-core

#添加LED支持
LED modules  —>
< *> kmod-ledtrig-usbdev…………………………. LED USB device Trigger

#添加luci
LuCI ->Collections -> <*> luci

#添加luci的中文语言包
LuCI ->Translations -> <*> luci-i18n-chinese

#添加luci应用
LuCI ->Applications  —> <*> luci-app-aria2……………………………… LuCI Support for aria2
LuCI ->Applications  —> <*> luci-app-ddns……………………… Dynamic DNS configuration module
LuCI ->Applications  —> <*> luci-app-samba……………….. Network Shares – Samba SMB/CIFS module
LuCI ->Applications  —> <*> luci-app-transmission…………………. LuCI Support for Transmission

开启POWER LED状态指示灯

target\linux\ramips\base-files\etc\diag.sh

get_status_led() {
    case $(ramips_board_name) in
+    hg255d)
+        status_led="hg255d:power"
+        ;;

使用RA-MOD软件源

RA-MOD https://github.com/ravageralpha/my_openwrt_mod

feeds.conf.default
src-git ramod git://github.com/ravageralpha/my_openwrt_mod.git
#src-git luci http://git.openwrt.org/project/luci.git    

./scripts/feeds clean
./scripts/update -a
./scripts/install -a

添加自动挂载脚本

/package/base-files/files/etc/gotplug/block/30-block_mount

#!/bin/sh

#---------------------------------------------------------------------
# Filename:    30-block_mount
# Revision:    0.5.1
# Data:        Jul. 7, 2014
# Email:       kevinyu@vip.qq.com
# Contacts:    QQ/TM 389191 or mail address above
# Licensing:   General Public License v2
# Description: Created for automatic mount block devices on OpenWRT
# Usage:       Put this script into directory /etc/hotplug.d/block
#---------------------------------------------------------------------

## Global settings of auto-mount script ##

# Turn on|off auto-mount function for disk volumes
VOL_ENABLED=1  # <0|1  0-Disable, 1-Enable>

# Turn on|off auto-mount function for sawp partition  
SWAP_ENABLED=1  # <0|1  0-Disable, 1-Enable>

# Set which method you want to name the mounted volumes
USE_VLABEL=1  # <0|1  0-Use device name, 1-Use volume label>  Eg. /mnt/sda1 | /mnt/DataDisk
#
# Note that if you choose name mount point by volume label but the volume's label is empty,
# the volume will be named to 'volume_$PARTUUID', such as the /mnt/volume_31173116-01
# Also, if exist more than one device which have the same volume label, it will be renamed 
# as the original name + sequence number, such as the /mnt/DataDisk_n (n=1,2,3..9)

# Show filesystem type as the prefix of mount point, requires set USE_VLABEL=1
FSTYPE_IN_VLABEL=1  # <0|1  0-Disable, 1-Enable>  Eg. /mnt/[ntfs]-DataDisk

# Set access the mounted device with read-write or read-only permission
FS_READONLY=0  # <0|1  0-Read Write, 1-Read Only>

# Exclusion list of auto-mount function
# Allows mixing the device name, volume label and UUID, each item must be separated by space(s)
# Eg. EXCLUDE_LIST="sda1 DataDisk f32b2ea6-4d42-43a5-bcec-7d818a163d07" 
EXCLUDE_LIST=""  # Default: empty string

# Specify a directory for mounts
MOUNTS_PATH="/mnt"  # Default: /mnt , don't need include the trailing slash (/)

# Define the add-ons scripts directory for automatic execute
ADDSH_PATH="/etc/hotplug.d/user"  # Script naming rule: [0-9][0-9]-xxxxx, Eg. 20-backup-sdcard

## End of global settings ##

# Purge the directory MOUNTS_PATH
purge_mnts()
{
local i RETVAL
[ -d $MOUNTS_PATH ] || return 1
for i in $MOUNTS_PATH/* ; do
    if [ -d $i ] ; then
        if [ -z "`ls -A $i 2>&-`" ] ; then
            `grep -qs "$i" /proc/mounts` || { rm -rf $i 2>/dev/null; RETVAL=$?; }
            if [ $RETVAL -eq 0 ] ; then
                logger -t Auto-Mount "[Notice] Unused mount point $i was removed"
                [ "$CLI" = "yes" ] && echo "[Notice] Unused mount point '$i' was removed"
            else
                logger -t Auto-Mount "[Error] Remove unused mount point $i failed"
                [ "$CLI" = "yes" ] && echo "[Error] Remove unused mount point $i failed"
            fi
        fi
    fi
done
}

# Unmount all block device
umountall()
{
local i MOUNTS
MOUNTS=`grep -os '^/dev/sd[a-z][1-9]' /proc/mounts`
for i in $MOUNTS ; do
    umount -f $i
    [ $? -eq 0 ] &&    echo "[Notice] Device $i unmounted" | tee /proc/self/fd/2 | logger -t Auto-Mount
done
purge_mnts
}

# Detect blkid exists
BLKID=`which blkid`
if [ $? -ne 0 ] ; then
    logger -t Auto-Mount "[Error] Unable to mount block devices automatically because 'blkid' does not exist"
    exit 1
fi

MOUNTS_PATH=${MOUNTS_PATH%/}
[ -z "$ACTION" ] && ACTION=${1##*-}
[ -n "$DEVICENAME" ] && DEV=$DEVICENAME || DEV=$2
logger -t Auto-Mount "[Debug] action='$ACTION' devicename='$DEV'"
case "$ACTION" in
    add)
        [ -z "$DEV" ] && { logger -t Auto-Mount "[Error] Missing required arguments: \$devicename"; exit 1; }
        if [ -n "$EXCLUDE_LIST" ] ; then
            UUID=`$BLKID -s UUID /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '`
            VLABEL=`$BLKID -d -s LABEL /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '`
            for i in $EXCLUDE_LIST ; do
                ignore=0
                if `echo "$i" | grep -qs '^sd[a-z][1-9]$'` ; then  # is device name
                    [ $i = $DEV ] && ignore=1
                elif `echo "$i" | grep -Eiqs '^[0-9a-f]{8}(-[0-9a-f]{4}){3}-[0-9a-f]{12}$'` ; then  # is UUID
                    [ $i = $UUID ] && ignore=1
                else  # as volume label
                    [ $i = $VLABEL ] && ignore=1
                fi
                [ $ignore -eq 1 ] && { logger -t Auto-Mount "[Notice] Device $DEV is ignored because it in exclusion list"; exit 0; }
            done
        fi
        if `echo "$DEV" | grep -qs '^sd[a-z][1-9]$'` ; then
            [ -z "$VLABEL" ] && VLABEL=`$BLKID -d -s LABEL /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '`
            [ -z "$VLABEL" ] && VLABEL="unknown"
            FSTYPE=`$BLKID -s TYPE /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '`
            logger -t Auto-Mount "[Debug] devicename='$DEV' volume_label='$VLABEL' fstype='$FSTYPE'"
            MCMD=""  # set default value
            [ $FS_READONLY -eq 1 ] && acs="ro" || acs="rw"
            case "$FSTYPE" in
                ext[234])
                    if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then
                        MCMD="mount -t $FSTYPE -o ${acs},noatime"
                    fi
                    ;;
                xfs|reiserfs)
                    if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then
                        MCMD="mount -t $FSTYPE -o ${acs},noatime"
                    fi
                    ;;
                iso9660|udf)
                    if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then
                        MCMD="mount -t $FSTYPE -o ro"
                    fi                    ;;
                vfat|msdos)
                    if `grep -vs '^nodev' /proc/filesystems | grep -qs "$FSTYPE"` ; then
                        MCMD="mount -t $FSTYPE -o ${acs},codepage=936,umask=000"  #iocharset=utf8
                    fi
                    ;;
                exfat)
                    if `grep -Eqs '^[[:space:]]+fuseblk$' /proc/filesystems` && `which mount.exfat >/dev/null` ; then
                        MCMD="mount.exfat -o ${acs},iocharset=cp936,umask=000"
                    fi
                    ;;
                ntfs)
                    if `grep -Eqs '^[[:space:]]+fuseblk$' /proc/filesystems` && `which mount.ntfs-3g >/dev/null` ; then
                        MCMD="mount -t ntfs-3g -o ${acs},noatime,big_writes,async,umask=000"
                    fi
                    ;;
                swap)
                    [ $SWAP_ENABLED -ne 1 ] && exit 0
                    if [ `grep -vs '^Filename' /proc/swaps | wc -l` -eq 0 ] ; then
                        MCMD="swapon /dev/$DEV"
                    fi
                    ;;
                *)
                    MCMD=""
                    ;;
            esac
            [ $VOL_ENABLED -ne 1 ] && exit 0
            if [ $FSTYPE = "swap" ] ; then
                MOPT=""
            elif [ $FSTYPE = "iso9660" -o $FSTYPE = "udf" ] ; then
                CDROM="cdrom"
                if `grep -qs "$MOUNTS_PATH/$CDROM " /proc/mounts` ; then
                    SUFFIX=1
                    while `grep -qs "$MOUNTS_PATH/$CDROM " /proc/mounts` ; do
                        [ $SUFFIX -lt 10 ] && CDROM="${CDROM%_*}_$SUFFIX" || { CDROM="${CDROM%_*}_99"; break; }
                        let SUFFIX++
                    done
                fi
                MPOINT=$CDROM
            else
                if [ $USE_VLABEL -eq 1 ] ; then
                    if [ $VLABEL = "unknown" ] ; then
                        PARTUUID=`$BLKID -s PARTUUID /dev/$DEV | awk -F '=' '{print $NF}' | tr -d '"| '`
                        [ -z "$PARTUUID" ] && PARTUUID=`cat /proc/sys/kernel/random/uuid | cut -f1 -d'-'`
                        VLABEL="volume_${PARTUUID}"
                    elif `grep -qis "$MOUNTS_PATH/$VLABEL " /proc/mounts` ; then
                        SUFFIX=1
                        while `grep -qis "$MOUNTS_PATH/$VLABEL " /proc/mounts` ; do
                            if [ $SUFFIX -lt 10 ] ; then
                                VLABEL="$(echo "$VLABEL" | sed 's/_[0-9]\+$//')_$SUFFIX"
                                let SUFFIX++
                            else
                                VLABEL="$(echo "$VLABEL" | sed 's/_[0-9]\+$//')_99"
                                break
                            fi
                        done
                    fi
                    [ $FSTYPE_IN_VLABEL -eq 1 ] && MPOINT="[${FSTYPE}]-${VLABEL}" || MPOINT=$VLABEL
                else
                    MPOINT=$DEV
                fi
                MOPT="/dev/$DEV $MOUNTS_PATH/$MPOINT"
            fi
            if [ -n "$MCMD" ] ; then
                if ! `grep -qs '/dev/$DEV' /proc/mounts` ; then
                    [ $FSTYPE = "swap" ] || { [ -d $MOUNTS_PATH/$MPOINT ] || mkdir -p $MOUNTS_PATH/$MPOINT; }
                    logger -t Auto-Mount "[Debug] MountCMD='$MCMD $MOPT'"
                    # echo "[Debug] MountCMD='$MCMD $MOPT'" >> /tmp/auto-mount-debug
                    $MCMD $MOPT
                    RETVAL=$?
                    if [ $FSTYPE = "swap" ] ; then
                        if [ $RETVAL -eq 0 ] ; then
                            logger -t Auto-Mount "[Notice] Swap device /dev/$DEV turned on" 
                        fi
                    else
                        if [ $RETVAL -eq 0 ] ; then
                            logger -t Auto-Mount "[Notice] Block device /dev/$DEV mounted on $MOUNTS_PATH/$MPOINT" 
                        else
                            logger -t Auto-Mount "[Warning] Re-try mount the block device /dev/$DEV after 2 seconds..."
                            sleep 2
                            $MCMD $MOPT
                            if [ $? -eq 0 ] ; then
                                logger -t Auto-Mount "[Notice] Block device /dev/$DEV mounted on $MOUNTS_PATH/$MPOINT" 
                            else
                                rm -rf $MOUNTS_PATH/$MPOINT 2>/dev/null
                                logger -t Auto-Mount "[Error] Mount block device /dev/$DEV encounters an error"
                                exit 1
                            fi
                        fi
                    fi
                fi
            else
                if [ $FSTYPE = "swap" ] ; then
                    logger -t Auto-Mount "[Notice] Swap device /dev/$DEV was ignored"
                else
                    logger -t Auto-Mount "[Error] Unsupported filesystem '$FSTYPE' on /dev/$DEV"
                fi
            fi
            unset MCMD
        fi
        purge_mnts
        ;;
    remove)
        [ -z "$DEV" ] && { logger -t Auto-Mount "[Error] Missing required arguments: \$devicename"; exit 1; }
        if `echo "$DEV" | grep -qs '^sd[a-z][1-9]$'` ; then
            if `grep -qs '/dev/$DEV' /proc/mounts` ; then
                MPATH=`awk -F ' ' '/\/dev\/'"$DEV"'/ {print $2}' /proc/mounts 2>/dev/null`
                umount /dev/$DEV
                [ $? -eq 0 ] &&    logger -t Auto-Mount "[Notice] Block device $DEV unmounted"
                [ -d "$MPATH" ] && rm -rf $MPATH 2>/dev/null
            fi
            if `grep -qs '/dev/$DEV' /proc/swaps` ; then
                swapoff $DEV
                [ $? -eq 0 ] &&    logger -t Auto-Mount "[Notice] Swap device $DEV turned off"                 
            fi            
        fi
        purge_mnts
        ;;
    umountall)
        CLI="yes"
        umountall
        ;;
    purge)
        CLI="yes"
        purge_mnts
        ;;
    *)
        echo "[Error] ** Invalid action arguments: $ACTION" | tee /proc/self/fd/2 | logger -t Auto-Mount
        ;;
esac

## Execute the add-ons script
# ADDSH_PATH="$(cd "$(dirname "$0")"; cd ..; pwd)/user"
if [ -n "`ls -A $ADDSH_PATH 2>&-`" ]; then
    i=0
    for addsh in ${ADDSH_PATH}/[0-9][0-9]-* ; do
        [ $i -eq 0 ] && logger -t Auto-Mount "[Notice] -- Execute additional scripts ..."
        logger -t Hotplug-Debug "-- Exec script - $addsh"
        sh $addsh $ACTION $DEV 
        let i++
    done
fi
# Script EOF
find_xiaohei
关注
专栏目录
open wrt 跟换主题_Openwrt编译进阶-修改密码、路由连接数、时区及主题
weixin_30486089的博客
01-28 1465
默认中文，添加并默认主题修改feeds/luci/libs/web/root/etc/config1optionlangauto改为1option lang zh_cn并添加123configinternallanguagesoptionen'English'optionzh_cn'chinese'添加主题1.首先打开trunk/feeds/luci/themes这个目录，你会发现...
Openwrt编译进阶-修改ROOT密码，修改默认WiFi名称，修改主机名，修改主机型号
qq_18684361的博客
03-16 1万+
修改密码 默认情况下root是没有密码的，需设定密码才能开启ssh。 修改shadow文件，位于package/base-files/files/etc/shadow 1)修改登陆密码 root:$1$wEehtjxj$YBu4quNfVUjzfv8p/PBo5.:0:0:99999:7::: 密码经过加密，将密码修改成admin。 2）默认中文，修改主机名，添加并修改默认主题，设定时区...
Liunx基础——find命令查找文件
最新发布
m0_62855949的博客
08-23 532
find 命令是在 中非常强大的文件查找工具。它可以根据多种标准来查找文件，如文件名、类型、大小、修改时间等。
openwrt编译进阶
qq_21949217的专栏
12-09 2520
Openwrt编译进阶 分享到 评论 Openwrt编译 文章目录 1. Openwrt基础编译2. Openwrt编译进阶 2.1. 修改WIFI设置2.2. 修改LUCI 2.2.1. 修改LUCI界面配置2.2.2. 添加释放内存2.2.3. 在顶栏显示重启2.2.4. 在顶栏显示备份/升级 2.3. 修改配置文件 2.3.1.
openwrt进阶
jameslord的专栏
04-18 972
vsftpd账号设置，支持多个账号软件系统备份
openwrt 编译进阶
无聊的读书人
04-11 2550
(1)-编译703_8M固件 1.    target/linux/ar71xx/image/Makefile $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0×07030101,1,8Mlzma)) 2.
openwrt ntp服务器修改,Openwrt编译进阶-修改ROOT密码，修改默认WiFi名称，修改主机名，修改主机型号...
weixin_34665990的博客
08-12 1166
修改密码默认状况下root是没有密码的，需设定密码才能开启ssh。修改shadow文件，位于package/base-files/files/etc/shadowphp1)修改登录密码root:$1$wEehtjxj$YBu4quNfVUjzfv8p/PBo5.:0:0:99999:7:::密码通过加密，将密码修改为admin。html2)默认中文，修改主机名，添加并修改默认主题，设定时区linu...
OpenWrt开发入门培训视频.zip
02-21
7.交叉编译工具链的原理和使用方法。 8.OpenWRT Package结构分析。 9.如何移植、编写简单的软件。 10.OpenWRT UI框架发展历史讲解，石像鬼、X-WRT、Luci。 11.基于uhttpd,lua编写简单的UI界面，基于Luci编写简单的UI...
openwrt编译文档
01-18
OpenWrt编译文档旨在指导用户如何使用OpenWrt 14版本的源码树进行编译，并指导用户如何定制OpenWrt固件以适应特定的硬件平台或满足特殊需求。 ### 路由器入门 #### 安装与配置 文档首先介绍了路由器的基本入门...
2019年"跟着佐大学Lede/OpenWrt开发进阶培训班"开始报名啦！
佐须之男-佐大的CSDN博客
03-22 1148
公告：<跟着佐大学OpenWrt开发入门培训班>可继续报名，进阶班和入门班侧重点不同，请按需报班。入门班报名地址：http://forgotfun.org/2018/04/openwrt-training-2018.html 想法的由来： 承蒙网友们的厚爱，<跟着佐大学OpenWrt开发入门培训班>得到了大家广泛的好评。学员们感觉意犹未尽，一直催促我开二期进阶培训班...
自定义openwrt的配置界面：luci进阶之路
热门推荐
fager漫长路
05-20 2万+
Luci是 Lua ConfigurationInterface的简称，主要为openwrt提供配置接口，openwrt利用uhttpd服务，运行web程序，进而使luci的代码能够在浏览器上与用户进行可视化的操作，便于配置路由参数和一些其他应用的参数。
【速记】openwrt - 编译、刷固件（资料整理）
LawssssCat的博客
12-28 1万+
玩过的固件有lede（听说是s插件作者）问题：无法指定版本，基本天天都有改动（大神辛苦了）稳定版lienol（听说是p插件作者）定期merge原生openwrt，但是有些插件要自己找定期merge原生openwrt，自带的插件挺全的在玩 2022年4月6日（解决数字摘要引起的自编固件上任意安装使用官方源软件问题）已安装的软件包 kernel 版本不兼容，需要 5.4.188-1-db222399… 而 5.4.188-1-a3831ee4… 已安装。这种提示就是数字摘要问题。
luci与页面的数据交互
jfxu
05-09 8917
htm中通过XHR调用lua脚本，lua script  location : /usr/lib/lua/luci/controller/admin/xxx.lua xxx.htm: XHR.poll(5,'', null, function(x, rval) {     ...... } ); 第一个参数为定时刷新时间（单位：S） 第二个参数是luci生成的路径，其中param
openwrt LuCI
hzlarm的博客
04-21 5907
等。可参考源码。
openwrt在编译时去掉dropbear后开启ssh方法
u013578795的博客
01-27 2600
前提是能进入luci 1、更新openwrt安装源 2、搜索openssh-server并安装     3、由于安装完后需要手动启动但是我们又进不了ssh，这是可以在启动项里增加一条命令   这样重启完成后就可以ssh连进去了...
利用OpenWRT使路由器支持openflow1.3协议
刚出生的程序猿
12-19 4788
1.刷机环境 Ubuntu 14.04（64bit） 一台Openwrt支持的设备 一条网线 2.下载Openwrt源码　　首先到https://wiki.openwrt.org/toh/start#supported.hardware.-.router.type查看准备的路由器是否被Openwrt所支持，我刷过的型号有TL-MR3420ver1.1和TL-WR740Nver3，分别对应着15.05
luci接口说明
wsclinux的专栏
04-27 4101
luci.dispatcher entry (path, target, title, order) Create a new dispatching node and define common parameters. Parameters path: Virtual pathtarget: Target function to call when dispatched.ti
(一)openwrt源码目录概述
weixin_34387468的博客
12-13 376
前言 这段时间总是在和openwrt打交道,之前也零零散散地写过一点，还是希望能有点体系。还记得我刚看到源代码的时候，觉得无从下手.我想从Makefile的整个执行过程入手,搞清楚编译源代码的几个小时中,到底发生了哪些故事. 本文是这个系列的第一篇.主要讲一下我对openwrt整个目录结构的理解.我们将源代码从官方下载而来的目录称之为原始目录,将编译后生成的目录称之为生成目录,分...
OpenWRT与摄像头挂载教程：从编译到升级
教程覆盖了从初学者到进阶用户的多个层次，包括虚拟机安装、Linux系统设置、OpenWrt源码下载、编译系统配置、烧写程序方法以及智能路由器的基本使用。此外，还提到了LUCI界面定制开发、GPIO控制、U盘挂载和摄像头...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值