sky也是运维人员，在使用puppet的配置过程中，经常会有碰到些参数，
不知道如何修改，每次都要去看查puppet手册，要不去puppet的官方
网站去看文档，另外也有些同学不知道，puppet的配置到底有那些参数，
以及参数的具体意思，你真的懂得puppet吗，熟悉puppet参数吗，为节约时间查找，
直接把相关内容转贴过来，带着上面的问题跟 sky一起学习puppet.conf吧！
【基础】
puppet的安装与配置可以参阅sky之前的文章，在使用puppet的时候，
也请熟悉的核心配置文件puppet.conf，接下来就详细介绍puppet.conf文件。
【puppet 配置文件详解】
Name
Configuration Reference
This page is autogenerated; any changes will get overwritten(last generated on Sat Mar 22 17:46:15 +1100 2008)
Specifying Configuration Parameters On The Command-Line
Every Puppet executable (with the exception of puppetdoc )accepts all of the parameters below,
but not all of the arguments make sense for everyexecutable. Each parameter has a section
listed with it in parentheses; often, that section will map toan executable (e.g., puppetd ),
in which case it probably only makes sense for that oneexecutable. If main is listed as the section,
it is most likely an option that is valid for everyone.
I have tried to be as thorough as possible in the descriptionsof the arguments,
so it should be obvious whether an argument is appropriate ornot.
These parameters can be supplied to the executables either ascommand-line options or in the configuration file.
For instance, the command-line invocation below would setthe configuration directory to /private/puppet :
$ puppetd --confdir=/private/puppet # 指定puppetd.conf文件生成路径目录。
Note that boolean options are turned on and off with a slightlydifferent syntax on the command line:
$ puppetd --storeconfigs ## 命令行下使用storeconfigs
$ puppetd --no-storeconfigs ##命令行下不使用 storeconfigs
The invocations above will enable and disable, respectively, thestorage of the client configuration.
Configuration Files
As mentioned above, the configuration parameters can also bestored in a configuration file,
located in the configuration directory. As root, thedefault configuration directory is /etc/puppet ,
and as a regular user, the default configuration directoryis ~user/.puppet executables look for puppet.conf
in their configuration directory (although they previouslylooked for separate files). For example,
puppet.conf is located at /etc/puppet/puppet.conf as root and
~user/.puppet/puppet.conf as a regular user by default.
All executables will set any parameters set within the mainsection,
while each executable will also look for a section named for theexecutable and load those parameters.
For example, puppetd will look for a section named puppetd ,
and puppetmasterd looks for a section named puppetmasterd tocustomize the settings for all of your executables.
File Format
The file follows INI-style formatting. Here is an example of avery simple
puppet.conf file:
[main]
confdir = /private/puppet
storeconfigs = true
Note that boolean parameters must be explicitly specified astrue or
false as seen above.
If you need to change file parameters (e.g., reset the mode orowner), do so within curly braces on the same line:
[main]
myfile = /tmp/whatever {owner = root, mode =644}
If you are starting out with a fresh configuration,
you may wish to let the executable generate a templateconfiguration file for you
by invoking the executable in question with the--genconfig command.
The executable will print a template configuration to standardoutput, which can be redirected to a file like so:
$ puppetd --genconfig > /etc/puppet/puppet.conf ##生成puppet配置文件，请注意生成的配置文件会覆盖之前的。
Note that this invocation will replace the contents of anypre-existing
puppet.conf file, so make a backup of your present config if itcontains valuable information.
All parameters will be under a single section heading matchingthe name of the process
used to generate the configuraiton (puppetd, in thiscase).
Like the --genconfig argument, the executables also accept a--genmanifest
argument, which will generate a manifest that can be used tomanage all of Puppets
directories and files and prints it to standard output. This canlikewise be redirected to a file:
$ puppetd --genmanifest > /etc/puppet/manifests/site.pp ##使用genmaifest生成puppet 站点文件(site.pp)
Puppet can also create user and group accounts for itself (onepuppet group and one puppet user)
if it is invoked as root with the --mkusers argument:
$ puppetd --mkusers ##创建puppet的运行用户和组。
Signals
The puppetd and puppetmasterd executables catch some signals forspecial handling.
Both daemons catch ( SIGHUP ), which forces the server torestart tself. Predictably,
interrupt and terminate ( SIGINT and SIGHUP ) will shut down theserver, whether it be an instance of
puppetd or puppetmasterd Sending the SIGUSR1 signal to aninstance of puppetd will cause it to
immediately begin a new configuration transaction with theserver. This signal has no effect on puppetmasterd
Configuration Parameter Reference Below is a list of alldocumented parameters. Not all of them are valid
with all Puppet executables, but the executables will ignore anyinappropriate values.
authconfig
The configuration file that defines the rights to the differentnamespaces and methods.
This can be used as a coarse-grained authorization systemfor both puppetd and puppetmasterd
*
Default: $confdir/namespaceauth.conf
autoflush
Whether log files should always flush to disk.
*
Default: false
autosign ##是否启动自动ssl签名
Whether to enable autosign. Valid values are true (whichautosigns any key request, and is a very bad idea),
false (which never autosigns any key request), and the path to afile, which uses that configuration file to determine which keys to sign.
*
Default: $confdir/autosign.conf ##如要自动给客户端签名，这里就是配置文件。
bindaddress ##绑定ip地址
The address to bind to. Mongrel servers default to 127.0.0.1 andWEBrick defaults to 0.0.0.0.
bucketdir
Where FileBucket files are stored.
*
Default: $vardir/bucket
ca
Wether the master should function as a certificate authority.
*
Default: true
ca_days
How long a certificate should be valid. This parameter isdeprecated, use ca_ttl instead
ca_md
The type of hash used in certificates.
*
Default: md5
ca_port
The port to use for the certificate authority.
*
Default: $masterport
ca_server
The server to use for certificate authority requests. It is aseparate server because it cannot and does not need to horizontally scale.
*
Default: $server
ca_ttl ##证书有效时期单位
The default TTL for new certificates; valid values must be aninteger, o
ptionally followed by one of the units y (years of 365 days), d(days), h (hours), or s (seconds).
The unit defaults to seconds. If this parameter is set,ca_days is ignored.
Examples are 3600 (one hour) and 1825d, which is the same as 5y(5 years)
*
Default: 5y
cacert
The CA certificate.
*
Default: $cadir/ca_crt.pem
cacrl
The certificate revocation list (CRL) for the CA. Set this tofalse if you do not want to use a CRL.
*
Default: $cadir/ca_crl.pem
cadir
The root directory for the certificate authority.
*
Default: $ssldir/ca
cakey
The CA private key.
*
Default: $cadir/ca_key.pem
capass
Where the CA stores the password for the private key
*
Default: $caprivatedir/ca.pass
caprivatedir
Where the CA stores private certificate information.
*
Default: $cadir/private ##客户端私钥保存的位置
capub
The CA public key.
*
Default: $cadir/ca_pub.pem
casesensitive
Whether matching in case statements and selectors should becase-sensitive.
Case insensitivity is handled by downcasing all values beforecomparison.
*
Default: false
cert_inventory
A Complete listing of all certificates
*
Default: $cadir/inventory.txt
certdir
The certificate directory.
*
Default: $ssldir/certs
certdnsnames
The DNS names on the Server certificate as a colon-separatedlist. If it is anything other than an empty string,
it will be used as an alias in the created certificate. Bydefault, only the server gets an alias set up, and only for puppet.
certname
The name to use when handling certificates. Defaults to thefully qualified domain name.
*
Default: www.mysqlops.com
classfile
The file in which puppetd stores a list of the classesassociated with the retrieved configuration.
Can be loaded in the separate puppet executable using the--loadclasses option.
*
Default: $statedir/classes.txt
clientbucketdir
Where FileBucket files are stored locally.
*
Default: $vardir/clientbucket ##客户端FileBucket保存的路径
code
Code to parse directly. This is essentially only used by puppet,
and should only be set if you are writing your own Puppetexecutable
color
Whether to use colors when logging to the console. Valid valuesare ansi (equivalent to true ),
html (mostly used during testing with TextMate), and false, which produces no color.
*
Default: ansi
confdir
The main Puppet configuration directory. The default for thisparameter is calculated based on the user.
If the process is runnig as root or the user that puppetmasterdis supposed to run as, it defaults to a system directory,
but if it is running as any other user, it defaults tobeing in ~
*
Default: /etc/puppet
config
The configuration file for puppetdoc.
*
Default: $confdir/puppet.conf
configprint ##打印配置文件参数
Print the value of a specific configuration parameter. If aparameter is provided for this,
then the value is printed and puppet exits. Comma-separatemultiple values. For a list of all values, specify all.
This feature is only available in Puppet versions higher than0.18.4.
configtimeout ##客户端等待配置时间
How long the client should wait for the configuration to beretrieved before considering it a failure.
This can help reduce flapping if too many clients contact theserver at one time.
*
Default: 120
csrdir
Where the CA stores certificate requests
*
Default: $cadir/requests
daemonize ##默认在后台运行程序
Send the process into the background. This is the default.
*
Default: true
dbadapter ##使用何种数据库
The type of database to use.
*
Default: sqlite3
dblocation
The database cache for client configurations. Used for queryingwithin the language.
*
Default: $statedir/clientconfigs.sqlite3
dbmigrate
Whether to automatically migrate the database.
*
Default: false
dbname
The name of the database to use.
*
Default: puppet
dbpassword
The database password for Client caching. Only used whennetworked databases are used.
*
Default: puppet
dbserver
The database server for Client caching. Only used when networkeddatabases are used.
*
Default: localhost
dbsocket
The database socket location. Only used when networked databasesare used. Will be ignored if the value is an empty string.
dbuser
The database user for Client caching. Only used when networkeddatabases are used.
*
Default: puppet
diff
Which diff command to use when printing differences betweenfiles.
*
Default: diff
diff_args
Which arguments to pass to the diff command when printingdifferences between files.
downcasefacts
Whether facts should be made all lowercase when sent to theserver.
*
Default: false
dynamicfacts
Facts that are dynamic; these facts will be ignored whendeciding whether changed facts should result in a recompile.
Multiple facts should be comma-separated.
*
Default: memorysize,memoryfree,swapsize,swapfree
environment ##puppet 运行环境
The environment Puppet is running in. For clients (e.g., puppetd) this determines the environment itself,
which is used to find modules and much more. For servers (i.e.,puppetmasterd ) this provides the default environment for
nodes we know nothing about.
*
Default: development
environments
The valid environments for Puppet clients. This is more usefulas a server-side setting than client,
but any environment chosen must be in this list. Valuesshould be separated by a comma.
*
Default: production,development
evaltrace
Whether each resource should log when it is being evaluated.This allows you to interactively see exactly what is being done.
*
Default: false
external_nodes
An external command that can produce node information. Theoutput must be a YAML dump of a hash,
and that hash must have one or both of classes andparameters , where classes is an array and parameters is a hash.
For unknown nodes, the commands should exit with anon-zero exit code.
This command makes it straightforward to store your node mappinginformation in other data sources like databases.
*
Default: none
factdest
Where Puppet should store facts that it pulls down from thecentral server.
*
Default: $vardir/facts
factpath
Where Puppet should look for facts. Multiple directories shouldbe colon-separated, like normal PATH variables.
*
Default: $vardir/facts
factsignore
What files to ignore when pulling down facts.
*
Default: .svn CVS
factsource
From where to retrieve facts. The standard Puppet file type isused for retrieval,
so anything that is a valid file source can be used here.
*
Default: puppet://$server/facts
factsync
Whether facts should be synced with the central server.
*
Default: false
fileserverconfig
Where the fileserver configuration is stored.
*
Default: $confdir/fileserver.conf
filetimeout
The minimum time to wait (in seconds) between checking forupdates in configuration files.
This timeout determines how quickly Puppet checks whether a file(such as manifests or templates) has changed on disk.
*
Default: 15
genconfig
Whether to just print a configuration to stdout and exit. Onlymakes sense when used interactively.
Takes into account arguments specified on the CLI.
*
Default: false
genmanifest
Whether to just print a manifest to stdout and exit. Only makessense when used interactively.
Takes into account arguments specified on the CLI.
*
Default: false
graph
Whether to create dot graph files for the differentconfiguration graphs.
These dot files can be interpreted by tools like OmniGraffle ordot (which is part of ImageMagick).
*
Default: false
graphdir
Where to store dot-outputted graphs.
*
Default: $statedir/graphs
group
The group puppetmasterd should run as.
*
Default: puppet
hostcert
Where individual hosts store and look for their certificates.
*
Default: $certdir/$certname.pem
hostcsr
Where individual hosts store and look for their certificates.
*
Default: $ssldir/csr_$certname.pem
hostprivkey
Where individual hosts store and look for their private key.
*
Default: $privatekeydir/$certname.pem
hostpubkey
Where individual hosts store and look for their public key.
*
Default: $publickeydir/$certname.pem
http_enable_post_connection_check
Boolean; wheter or not puppetd should validate the server SSLcertificate against the request hostname.
*
Default: true
http_proxy_host
The HTTP proxy host to use for outgoing connections. Note: Youmay need to use a FQDN for the server hostname when using a proxy.
*
Default: none
http_proxy_port
The HTTP proxy port to use for outgoing connections
*
Default: 3128
httplog
Where the puppetd web server logs.
*
Default: $logdir/http.log
ignorecache ##忽略缓存，总是重新编译配置
Ignore cache and always recompile the configuration. This isuseful for testing new configurations,
where the local cache may in fact be stale even if thetimestamps are up to date - if the facts change or if the server changes.
*
Default: false
ignoreimport
A parameter that can be used in commit hooks,
since it enables you to parse-check a single file rather thanrequiring that all files exist.
*
Default: false
ignoreschedules
Boolean; whether puppetd should ignore schedules. This is usefulfor initial puppetd runs.
*
Default: false
keylength
The bit length of keys.
*
Default: 1024
ldapattrs
The LDAP attributes to include when querying LDAP for nodes.
All returned attributes are set as variables in thetop-level scope.
Multiple values should be comma-separated. The value all returnsall attributes.
*
Default: all
ldapbase
The search base for LDAP searches. It is impossible to provide ameaningful default here,
although the LDAP libraries might have one already set. Generally,i
t should be the ou=Hosts branch under your main directory.
ldapclassattrs
The LDAP attributes to use to define Puppet classes. Valuesshould be comma-separated.
*
Default: puppetclass
ldapnodes
Whether to search for node configurations in LDAP.
See http://reductivelabs.com/puppet/trac/wiki/LdapNodes/for more information.
*
Default: false
ldapparentattr
The attribute to use to define the parent node.
*
Default: parentnode
ldappassword
The password to use to connect to LDAP.
ldapport
The LDAP port. Only used if ldapnodes is enabled.
*
Default: 389
ldapserver
The LDAP server. Only used if ldapnodes is enabled.
*
Default: ldap
ldapssl
Whether SSL should be used when searching for nodes.
Defaults to false because SSL usually requires certificates tobe set up on the client side.
*
Default: false
ldapstring
The search string used to find an LDAP node.
*
Default: (&(objectclass=puppetClient)(cn=%s))
ldaptls
Whether TLS should be used when searching for nodes.
Defaults to false because TLS usually requirescertificates to be set up on the client side.
*
Default: false
ldapuser
The user to use to connect to LDAP. Must be specified as a fullDN.
lexical
Whether to use lexical scoping (vs. dynamic).
*
Default: false
libdir
An extra search path for Puppet. This is only useful for thosefiles that
Puppet will load on demand, and is only guaranteed to workfor those cases. In fact,
the autoload mechanism is responsible for making sure thisdirectory is in Ruby is search path
*
Default: $vardir/lib
listen ##是否监听连接，在使用pupptrun时候要配置
Whether puppetd should listen for connections. If this is true,
then by default only the runner server is started,
which allows remote authorized and authenticated nodes toconnect and trigger puppetd runs.
*
Default: false
localcacert
Where each client stores the CA certificate.
*
Default: $certdir/ca.pem
localconfig
Where puppetd caches the local configuration. An extensionindicating the cache format is added automatically.
*
Default: $statedir/localconfig
logdir ##puppet 的日志目录
The Puppet log directory.
*
Default: $vardir/log
manifest ##puppet的站点文件，在使用多个puppet环境时用
The entry-point manifest for puppetmasterd.
*
Default: $manifestdir/site.pp
manifestdir ##puppet 的站点文件目录
Where puppetmasterd looks for its manifests.
*
Default: $confdir/manifests
masterhttplog ##puppetmasterd的web服务器日志
Where the puppetmasterd web server logs.
*
Default: $logdir/masterhttp.log
masterlog ##puppetmasterd的日志
Where puppetmasterd logs. This is generally not used, sincesyslog is the default log destination.
*
Default: $logdir/puppetmaster.log
masterport ##puppetmaster的监听端口
Which port puppetmasterd listens on.
*
Default: 8140
maximum_uid ##支持最大的uid
The maximum allowed UID. Some platforms use negative UIDs
but then ship with tools that do not know how to handle signedints,
so the UIDs show up as huge numbers that can then not be fedback into the system.
This is a hackish way to fail in a slightly more usefulway when that happens.
*
Default: 4294967290
mkusers ##创建puppet的运行用户
Whether to create the necessary user and group that puppetd willrun as.
*
Default: false
modulepath ##puppet 模块存放路径
The search path for modules as a colon-separated list ofdirectories.
*
Default: $confdir/modules:/usr/share/puppet/modules
name ##服务名
The name of the service, if we are running as one. The defaultis essentially $0 without the path or
*
Default: puppetdoc
node_name ##客户端节点名
How the puppetmaster determines the clients identity and setsthe hostname,
fqdn and domain facts for use in the manifest, inparticular for determining which node statement applies to the client.
Possible values are cert (use the subject is CN in theclient is certificate)
and facter (use the hostname that the client reported in itsfacts)
*
Default: cert
node_terminus ## 那里查找节点信息
Where to find information about nodes.
*
Default: plain
noop ##puppet是否要运行noop模式，noop模式其实就是调试模式，模拟执行结果，用要用于测试。
Whether puppetd should be run in noop mode.
*
Default: false
paramcheck
Whether to validate parameters during parsing.
*
Default: true
parseonly ## 检查mainfests的语法
Just check the syntax of the manifests.
*
Default: false
passfile
Where puppetd stores the password for its private key. Generallyunused.
*
Default: $privatedir/password
path
The shell search path. Defaults to whatever is inherited fromthe parent process.
*
Default: none
pidfile
The pid file
plugindest
Where Puppet should store plugins that it pulls down from thecentral server.
*
Default: $libdir
pluginpath ##插件路径
Where Puppet should look for plugins. Multiple directoriesshould be colon-separated,
like normal PATH variables. As of 0.23.1, this option isdeprecated;
download your custom libraries to the $libdir instead.
*
Default: $vardir/plugins
pluginsignore
What files to ignore when pulling down plugins.
*
Default: .svn CVS
pluginsource
From where to retrieve plugins. The standard Puppet file type isused for retrieval,
so anything that is a valid file source can be used here.
*
Default: puppet://$server/plugins
pluginsync ##是否与puppetmaster同步插件
Whether plugins should be synced with the central server.
*
Default: false
privatedir
Where the client stores private certificate information.
*
Default: $ssldir/private
privatekeydir
The private key directory.
*
Default: $ssldir/private_keys
publickeydir
The public key directory.
*
Default: $ssldir/public_keys
puppetdlockfile ##临时停止puppet运行的文件
A lock file to temporarily stop puppetd from doing anything.
*
Default: $statedir/puppetdlock
puppetdlog ##puppet运行日志
The log file for puppetd. This is generally not used.
*
Default: $logdir/puppetd.log
puppetport
Which port puppetd listens on.
*
Default: 8139
rails_loglevel
The log level for Rails connections. The value must be a validlog level within Rails.
Production environments normally use info and otherenvironments normally use debug
*
Default: info
railslog
Where Rails-specific logs are sent
*
Default: $logdir/rails.log
report ##每次运行puppet是否要发送报告。
Whether to send reports after every transaction.
*
Default: false
reportdir ##存放report的路径
The directory in which to store reports received from theclient. Each client gets a separate subdirectory.
*
Default: $vardir/reports
reportfrom ##发送report的邮件账号
The from email address for the reports.
*
Default: sky@ww.mysqlops.com
reports ##生成的report文件
The list of reports to generate. All reports are looked for inpuppet/reports/<name>.rb,
and multiple report names should be comma-separated(whitespace is okay).
*
Default: store
reportserver ##reportserver主机
The server to which to send transaction reports.
*
Default: $server
req_bits
The bit length of the certificates.
*
Default: 2048
rrddir
The directory where RRD database files are stored.
Directories for each reporting host will be created underthis directory.
*
Default: $vardir/rrd
rrdgraph
Whether RRD information should be graphed.
*
Default: false
rrdinterval
How often RRD should expect data. This should match how oftenthe hosts report back to the server.
*
Default: $runinterval
rundir
Where Puppet PID files are kept.
*
Default: $vardir/run
runinterval #客户端多长时间连接到puppetmaster，单位为秒,经常用同学说要修改puppet客户端的默认连接时间
How often puppetd applies the client configuration; in seconds.
*
Default: 1800
sendmail ##sendmail的二进制文件路径
Where to find the sendmail binary with which to send email.
serial
Where the serial number for certificates is stored.
*
Default: $cadir/serial
server
The server to which server puppetd should connect
*
Default: puppet
servertype
The type of server to use. Currently supported options arewebrick and mongrel.
If you use mongrel, you will need a proxy in front of theprocess or processes,
since Mongrel cannot speak SSL.
*
Default: webrick
show_diff
Whether to print a contextual diff when files are beingreplaced.
The diff is printed on stdout, so this option is meaninglessunless you are running Puppet interactively.
This feature currently requires the diff/lcs Ruby library.
*
Default: false
signeddir ##ssl证书存放路径。
Where the CA stores signed certificates.
*
Default: $cadir/signed
smtpserver ##smpt的服务器ip
The server through which to send email reports.
*
Default: none
splay
Whether to sleep for a pseudo-random (but consistent) amount oftime before a run.
*
Default: false
splaylimit
The maximum time to delay before runs. Defaults to being thesame as the run interval.
*
Default: $runinterval
ssl_client_header
The header containing an authenticated client is SSL DN. Onlyused with Mongrel.
This header must be set by the proxy to the authenticatedclient is SSL DN
(e.g., /CN=puppet.reductivelabs.com ).
See http://reductivelabs.com/puppet/trac/wiki/UsingMongrelfor more information.
*
Default: HTTP_X_CLIENT_DN
ssl_client_verify_header
The header containing the status message of the clientverification.
Only used with Mongrel. This header must be set by theproxy to SUCCESS if the client successfully authenticated,
and anything else otherwise. Seehttp://reductivelabs.com/puppet/trac/wiki/UsingMongrel for more information.
*
Default: HTTP_X_CLIENT_VERIFY
ssldir
Where SSL certificates are kept.
*
Default: $confdir/ssl
statedir
The directory where Puppet state is stored. Generally,
this directory can be removed without causing harm (although itmight result in spurious service restarts).
*
Default: $vardir/state
statefile
Where puppetd and puppetmasterd store state associated with therunning configuration.
In the case of puppetmasterd, this file reflects the statediscovered through interacting with clients.
*
Default: $statedir/state.yaml
storeconfigs ##是否保存每个客户端的配置，这个需要activeRecord和rails支持
Whether to store each client is configuration. This requiresActiveRecord from Ruby on Rails.
*
Default: false
summarize ##打印概要信息
Whether to print a transaction summary.
*
Default: false
syslogfacility ##记录到系统日志级别
What syslog facility to use when logging to syslog. Syslog has afixed list of valid facilities,
and you must choose one of those; you cannot just make oneup.
*
Default: daemon
tagmap
The mapping between reporting tags and email addresses.
*
Default: $confdir/tagmail.conf
tags ##资源的tag标签
Tags to use to find resources. If this is set, then onlyresources tagged
with the specified tags will be applied. Values must becomma-separated.
templatedir
Where Puppet looks for template files.
*
Default: $vardir/templates
trace ##打印跟踪调试信息
Whether to print stack traces on some errors
*
Default: false
typecheck
Whether to validate types during parsing.
*
Default: true
usecacheonfailure
Whether to use the cached configuration when the remoteconfiguration will not compile.
This option is useful for testing new configurations,where you want to fix the broken
configuration rather than reverting to a known-good one.
*
Default: true
user
The user puppetmasterd should run as.
*
Default: puppet
vardir
Where Puppet stores dynamic and growing data.
The default for this parameter is calculated specially, likeconfdir.
*
Default: /var/puppet
yamldir
The directory in which YAML data is stored, usually in asubdirectory.
*
Default: $vardir/yaml
【总结】
虽然说sky经常使用puppet。但还真的不清楚puppet配置文件有这么多的参数， 大部分的英文还是比较简单，部分常用的
参数加粗了，并加以说明。相信大家都会看明白的。因为比较忙简单先翻译了部分参数，如有同学要兴趣可以全文翻译下。
puppet在使用过程中问题会随之不断的深入而出现，大家如有问题，可以先问google，大家也可以加入sky的puppet中文
自动化群(179750784)一起交流运维自动化以及puppet的应用。
304
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
