Partitioning and Formatting Second Hard Drive in Linux - (ext3)
by Jeff Hunter, Sr. Database Administrator
Contents
Introduction
This article presents the commands used to partition and format a second hard drive in Linux using the ext3 file system. For the purpose of this example, I installed a second hard drive in a Red Had Linux system where the drive is recognized as /dev/hdb. I want to make only one partition on this hard drive which will be /dev/hdb1.
fdisk
First, you will need to run the fdisk command in order to partition the disk. For this example, I only want to create one ext3 partition. Here is an example session:
[root@racnode1 ~]# fdisk /dev/hdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 4865. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-4865, default 1): 1 Last cylinder or +size or +sizeM or +sizeK (1-4865, default 4865): 4865 Command (m for help): t Partition number (1-4): 1 Hex code (type L to list codes): 83 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. |
Create ext3 File System
The next step is to create an ext3 file system on the new partition. Provided with the distribution is a script named /sbin/mkfs.ext3. Here is an example session of using the mkfs.ext3 script:
[root@racnode1 ~]# mkfs.ext3 -b 4096 /dev/hdb1 mke2fs 1.27 (8-Mar-2002) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 4889248 inodes, 9769520 blocks 488476 blocks (5.00%) reserved for the super user First data block=0 299 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 36 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. |
Mounting the File System
Now that the new hard drive is partition and formated, the last step is to mount the new drive. For this example, I will be mounting the new hard drive on the directory /db.
Edit the /etc/fstab file and add an entry for the new drive. For my example, I will create the /dev/hdb1 entry as follows:
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hdb1 /db ext3 defaults 1 1
/dev/hda2 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,owner,kudzu,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0 |
After making the entry in the /etc/fstab file, it is now just a matter of mounting the disk:
[root@racnode1 ~]# mount /db
[root@racnode1 ~]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda3 37191660 11016692 24285724 32% /
/dev/hda1 101089 12130 83740 13% /boot
none 515524 0 515524 0% /dev/shm
/dev/hdb1 38464340 32828 36477608 1% /db
|
About the Author
Jeffrey Hunter is an Oracle Certified Professional, Java Development Certified Professional, Author, and an Oracle ACE. Jeff currently works as a Senior Database Administrator for The DBA Zone, Inc. located in Pittsburgh, Pennsylvania. His work includes advanced performance tuning, Java and PL/SQL programming, developing high availability solutions, capacity planning, database security, and physical / logical database design in a UNIX, Linux, and Windows server environment. Jeff's other interests include mathematical encryption theory, programming language processors (compilers and interpreters) in Java and C, LDAP, writing web-based database administration tools, and of course Linux. He has been a Sr. Database Administrator and Software Engineer for over 17 years and maintains his own website site at: http://www.iDevelopment.info. Jeff graduated from Stanislaus State University in Turlock, California, with a Bachelor's degree in Computer Science.