refind 0.10.3 配置文件refind.conf简单分析

    • 本文为转载:点击打开链接
    • 以下为个人理解
    • 常用的可以修改的配置: 
      1. timeout,等待时间
      2. resolution,屏幕分辨率
      3. default_selection,默认进入的系统选项
      4. include,引导界面美化常用
      5. max_tag,最多可显示几个启动项
      6. dont_scan_dirs, dont_scan_files, dont_scan_volumes,设置引导器过滤那些目录、文件、卷类型(分区)
    • 默认的配置已经可以满足引导功能的实现,但个人感觉,至少 resolution这一项需要自己配置一下
    • 想了解详细的配置项的含义,去官网的说明页面,用“Google翻译”翻译一下,大体的意思就明白了

    配置文件的注释为“#”,我使用“//”是为了让字体显示为红色,请勿直接拷贝使用,稍稍理解一下,自己修改最佳。

    #
    # refind.conf
    # Configuration file for the rEFInd boot menu
    #
    
    # Timeout in seconds for the main menu screen. Setting the timeout to 0
    # disables automatic booting (i.e., no timeout). Setting it to -1 causes
    # an immediate boot to the default OS *UNLESS* a keypress is in the buffer
    # when rEFInd launches, in which case that keypress is interpreted as a
    # shortcut key. If no matching shortcut is found, rEFInd displays its
    # menu with no timeout.
    # 
    // 设置默认等待时间为20
    // 0 : 无限期等待
    // -1: 立即进入默认的系统    
    timeout 20  
    
    # Screen saver timeout; the screen blanks after the specified number of
    # seconds with no keyboard input. The screen returns after most keypresses
    # (unfortunately, not including modifier keys such as Shift, Control, Alt,
    # or Option). Setting a value of "-1" causes rEFInd to start up with its
    # screen saver active. The default is 0, which disables the screen saver.
    // 设置引导前屏保时间
    #screensaver 300
    
    # Hide user interface elements for personal preference or to increase
    # security:
    // eEFInd标识图
    #  banner      - the rEFInd title banner (built-in or loaded via "banner")
    // 每个标签的文字描述以及timeout设置的倒数计时器
    #  label       - boot option text label in the menu
    // 苹果系统子菜单中单用户选项
    #  singleuser  - remove the submenu options to boot Mac OS X in single-user
    #                or verbose modes; affects ONLY MacOS X
    // 苹果系统子菜单中安全模式选项
    #  safemode    - remove the submenu option to boot Mac OS X in "safe mode"
    // Mac硬件测试选项
    #  hwtest      - the submenu option to run Apple's hardware test
    // 无法显示所有的引导菜单时的左右指示箭头
    #  arrows      - scroll arrows on the OS selection tag line
    // 基本按键的简要说明
    #  hints       - brief command summary in the menu
    // 选项编辑器
    #  editor      - the options editor (+, F2, or Insert on boot options menu)
    // ??
    #  badges      - device-type badges for boot options
    // 所有选项
    #  all         - all of the above
    // 默认都激活
    # Default is none of these (all elements active)
    #
    // hideui 隐藏界面功能命令
    #hideui singleuser
    #hideui all
    
    # Set the name of a subdirectory in which icons are stored. Icons must
    # have the same names they have in the standard directory. The directory
    # name is specified relative to the main rEFInd binary's directory. If
    # an icon can't be found in the specified directory, an attempt is made
    # to load it from the default directory; thus, you can replace just some
    # icons in your own directory and rely on the default for others.
    # Default is "icons".
    #
    // 图标目录,默认 "icons"
    #icons_dir myicons
    #icons_dir icons/snowy
    
    # Use a custom title banner instead of the rEFInd icon and name. The file
    # path is relative to the directory where refind.efi is located. The color
    # in the top left corner of the image is used as the background color
    # for the menu screens. Currently uncompressed BMP images with color
    # depths of 24, 8, 4 or 1 bits are supported, as well as PNG images.
    #
    // 背景图
    #banner hostname.bmp
    #banner mybanner.png
    #banner icons/snowy/banner-snowy.png
    
    # Specify how to handle banners that aren't exactly the same as the screen
    # size:
    // 自动缩放
    #  noscale     - Crop if too big, show with border if too small
    // 全屏
    #  fillscreen  - Fill the screen
    # Default is noscale
    #
    // 背景图大小,默认自动缩放
    #banner_scale fillscreen
    
    # Icon sizes. All icons are square, so just one value is specified. The
    # big icons are used for OS selectors in the first row and the small
    # icons are used for tools on the second row. Drive-type badges are 1/4
    # the size of the big icons. Legal values are 32 and above. If the icon
    # files do not hold icons of the proper size, the icons are scaled to
    # the specified size. The default values are 48 and 128 for small and
    # big icons, respectively.
    #
    // 小图标大小
    #small_icon_size 96
    // 大图标大小
    #big_icon_size 256
    
    # Custom images for the selection background. There is a big one (144 x 144)
    # for the OS icons, and a small one (64 x 64) for the function icons in the
    # second row. If only a small image is given, that one is also used for
    # the big icons by stretching it in the middle. If only a big one is given,
    # the built-in default will be used for the small icons.
    #
    # Like the banner option above, these options take a filename of an
    # uncompressed BMP image file with a color depth of 24, 8, 4, or 1 bits,
    # or a PNG image. The PNG format is required if you need transparency
    # support (to let you "see through" to a full-screen banner).
    #
    // 选中时的图标
    #selection_big   selection-big.bmp
    #selection_small selection-small.bmp
    
    # Set the font to be used for all textual displays in graphics mode.
    # The font must be a PNG file with alpha channel transparency. It must
    # contain ASCII characters 32-126 (space through tilde), inclusive, plus
    # a glyph to be displayed in place of characters outside of this range,
    # for a total of 96 glyphs. Only monospaced fonts are supported. Fonts
    # may be of any size, although large fonts can produce display
    # irregularities.
    # The default is rEFInd's built-in font, Luxi Mono Regular 12 point.
    #
    // 字体
    #font myfont.png
    
    # Use text mode only. When enabled, this option forces rEFInd into text mode.
    # Passing this option a "0" value causes graphics mode to be used. Pasing
    # it no value or any non-0 value causes text mode to be used.
    # Default is to use graphics mode.
    #
    // 仅文本模式,默认不开启
    #textonly
    
    # Set the EFI text mode to be used for textual displays. This option
    # takes a single digit that refers to a mode number. Mode 0 is normally
    # 80x25, 1 is sometimes 80x50, and higher numbers are system-specific
    # modes. Mode 1024 is a special code that tells rEFInd to not set the
    # text mode; it uses whatever was in use when the program was launched.
    # If you specify an invalid mode, rEFInd pauses during boot to inform
    # you of valid modes.
    # CAUTION: On VirtualBox, and perhaps on some real computers, specifying
    # a text mode and uncommenting the "textonly" option while NOT specifying
    # a resolution can result in an unusable display in the booted OS.
    # Default is 1024 (no change)
    #
    // 文本模式 2 ??
    #textmode 2
    
    # Set the screen's video resolution. Pass this option either:
    #  * two values, corresponding to the X and Y resolutions
    #  * one value, corresponding to a GOP (UEFI) video mode
    # Note that not all resolutions are supported. On UEFI systems, passing
    # an incorrect value results in a message being shown on the screen to
    # that effect, along with a list of supported modes. On EFI 1.x systems
    # (e.g., Macintoshes), setting an incorrect mode silently fails. On both
    # types of systems, setting an incorrect resolution results in the default
    # resolution being used. A resolution of 1024x768 usually works, but higher
    # values often don't.
    # Default is "0 0" (use the system default resolution, usually 800x600).
    #
    #resolution 1024 768
    #resolution 1440 900
    // 屏幕分辨率->务必设置为自己电脑的分辨率
    resolution 1366 768
    #resolution 3
    
    # Launch specified OSes in graphics mode. By default, rEFInd switches
    # to text mode and displays basic pre-launch information when launching
    # all OSes except OS X. Using graphics mode can produce a more seamless
    # transition, but displays no information, which can make matters
    # difficult if you must debug a problem. Also, on at least one known
    # computer, using graphics mode prevents a crash when using the Linux
    # kernel's EFI stub loader. You can specify an empty list to boot all
    # OSes in text mode.
    # Valid options:
    #   osx     - Mac OS X
    #   linux   - A Linux kernel with EFI stub loader
    #   elilo   - The ELILO boot loader
    #   grub    - The GRUB (Legacy or 2) boot loader
    #   windows - Microsoft Windows
    # Default value: osx
    #
    // ??
    #use_graphics_for osx,linux
    
    # Which non-bootloader tools to show on the tools line, and in what
    # order to display them:
    // 命令行
    #  shell            - the EFI shell (requires external program; see rEFInd
    #                     documentation for details)
    // 内存测试
    #  memtest          - the memtest86 program, in EFI/tools, EFI/memtest86,
    #                     EFI/memtest, EFI/tools/memtest86, or EFI/tools/memtest
    // ??
    #  gptsync          - the (dangerous) gptsync.efi utility (requires external
    #                     program; see rEFInd documentation for details)
    // 分区
    #  gdisk            - the gdisk partitioning program
    // 苹果恢复模式
    #  apple_recovery   - boots the Apple Recovery HD partition, if present
    // windows恢复模式
    #  windows_recovery - boots an OEM Windows recovery tool, if present
    #                     (see also the windows_recovery_files option)
    // ??
    #  mok_tool         - makes available the Machine Owner Key (MOK) maintenance
    #                     tool, MokManager.efi, used on Secure Boot systems
    // ??
    #  csr_rotate       - adjusts Apple System Integrity Protection (SIP)
    #                     policy. Requires "csr_values" to be set.
    // 关于
    #  about            - an "about this program" option
    // 退出
    #  exit             - a tag to exit from rEFInd
    // 关机
    #  shutdown         - shuts down the computer (a bug causes this to reboot
    #                     many UEFI systems)
    // 重启
    #  reboot           - a tag to reboot the computer
    // 重启到固件
    #  firmware         - a tag to reboot the computer into the firmware's
    #                     user interface (ignored on older computers)
    #  fwupdate         - a tag to update the firmware; launches the fwupx64.efi
    #                     (or similar) program
    #  netboot          - launch the ipxe.efi tool for network (PXE) booting
    # Default is shell,memtest,gdisk,apple_recovery,windows_recovery,mok_tool,about,shutdown,reboot,firmware,fwupdate
    #
    #showtools shell, gdisk, memtest, mok_tool, apple_recovery, windows_recovery, about, reboot, exit, firmware, fwupdate
    
    # Boot loaders that can launch a Windows restore or emergency system.
    # These tend to be OEM-specific.
    # Default is LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
    #
    // windows恢复文件
    #windows_recovery_files LRS_ESP:/EFI/Microsoft/Boot/LrsBootmgr.efi
    
    # Directories in which to search for EFI drivers. These drivers can
    # provide filesystem support, give access to hard disks on plug-in
    # controllers, etc. In most cases none are needed, but if you add
    # EFI drivers and you want rEFInd to automatically load them, you
    # should specify one or more paths here. rEFInd always scans the
    # "drivers" and "drivers_{arch}" subdirectories of its own installation
    # directory (where "{arch}" is your architecture code); this option
    # specifies ADDITIONAL directories to scan.
    # Default is to scan no additional directories for EFI drivers
    #
    // 扫描驱动目录
    #scan_driver_dirs EFI/tools/drivers,drivers
    
    # Which types of boot loaders to search, and in what order to display them:
    #  internal      - internal EFI disk-based boot loaders
    #  external      - external EFI disk-based boot loaders
    #  optical       - EFI optical discs (CD, DVD, etc.)
    #  netboot       - EFI network (PXE) boot options
    #  hdbios        - BIOS disk-based boot loaders
    #  biosexternal  - BIOS external boot loaders (USB, eSATA, etc.)
    #  cd            - BIOS optical-disc boot loaders
    #  manual        - use stanzas later in this configuration file
    # Note that the legacy BIOS options require firmware support, which is
    # not present on all computers.
    # The netboot option is experimental and relies on the ipxe.efi and
    # ipxe_discover.efi program files.
    # On UEFI PCs, default is internal,external,optical,manual
    # On Macs, default is internal,hdbios,external,biosexternal,optical,cd,manual
    #
    #scanfor internal,external,optical,manual
    
    # By default, rEFInd relies on the UEFI firmware to detect BIOS-mode boot
    # devices. This sometimes doesn't detect all the available devices, though.
    # For these cases, uefi_deep_legacy_scan results in a forced scan and
    # modification of NVRAM variables on each boot. Adding "0", "off", or
    # "false" resets to the default value. This token has no effect on Macs or
    # when no BIOS-mode options are set via scanfor.
    # Default is unset (or "uefi_deep_legacy_scan false")
    #
    // bios兼容模式
    #uefi_deep_legacy_scan
    
    # Delay for the specified number of seconds before scanning disks.
    # This can help some users who find that some of their disks
    # (usually external or optical discs) aren't detected initially,
    # but are detected after pressing Esc.
    # The default is 0.
    #
    #scan_delay 5
    
    # When scanning volumes for EFI boot loaders, rEFInd always looks for
    # Mac OS X's and Microsoft Windows' boot loaders in their normal locations,
    # and scans the root directory and every subdirectory of the /EFI directory
    # for additional boot loaders, but it doesn't recurse into these directories.
    # The also_scan_dirs token adds more directories to the scan list.
    # Directories are specified relative to the volume's root directory. This
    # option applies to ALL the volumes that rEFInd scans UNLESS you include
    # a volume name and colon before the directory name, as in "myvol:/somedir"
    # to scan the somedir directory only on the filesystem named myvol. If a
    # specified directory doesn't exist, it's ignored (no error condition
    # results). The default is to scan the "boot" directory in addition to
    # various hard-coded directories.
    #
    // 总是扫描那些目录
    #also_scan_dirs boot,ESP2:EFI/linux/kernels
    
    # Partitions (or whole disks, for legacy-mode boots) to omit from scans.
    # For EFI-mode scans, you must specify a volume by its label, which you
    # can obtain in an EFI shell by typing "vol", from Linux by typing
    # "blkid /dev/{devicename}", or by examining the disk's label in various
    # OSes' file browsers.
    # For legacy-mode scans, you can specify any subset of the boot loader
    # description shown when you highlight the option in rEFInd.
    # The default is "LRS_ESP".
    #
    // 不扫描那些驱动器
    #dont_scan_volumes "Recovery HD"
    
    # Directories that should NOT be scanned for boot loaders. By default,
    # rEFInd doesn't scan its own directory, the EFI/tools directory, the
    # EFI/memtest directory, the EFI/memtest86 directory, or the
    # com.apple.recovery.boot directory. Using the dont_scan_dirs option
    # enables you to "blacklist" other directories; but be sure to use "+"
    # as the first element if you want to continue blacklisting existing
    # directories. You might use this token to keep EFI/boot/bootx64.efi out
    # of the menu if that's a duplicate of another boot loader or to exclude
    # a directory that holds drivers or non-bootloader utilities provided by
    # a hardware manufacturer. If a directory is listed both here and in
    # also_scan_dirs, dont_scan_dirs takes precedence. Note that this
    # blacklist applies to ALL the filesystems that rEFInd scans, not just
    # the ESP, unless you precede the directory name by a filesystem name,
    # as in "myvol:EFI/somedir" to exclude EFI/somedir from the scan on the
    # myvol volume but not on other volumes.
    #
    // 不要扫描那些目录
    #dont_scan_dirs ESP:/EFI/boot,EFI/Dell,EFI/memtest86
    
    # Files that should NOT be included as EFI boot loaders (on the
    # first line of the display). If you're using a boot loader that
    # relies on support programs or drivers that are installed alongside
    # the main binary or if you want to "blacklist" certain loaders by
    # name rather than location, use this option. Note that this will
    # NOT prevent certain binaries from showing up in the second-row
    # set of tools. Most notably, various Secure Boot and recovery
    # tools are present in this list, but may appear as second-row
    # items.
    # The file may be specified as a bare name (e.g., "notme.efi"), as
    # a complete filename (e.g., "/EFI/somedir/notme.efi"), or as a
    # complete filename with volume (e.g., "SOMEDISK:/EFI/somedir/notme.efi").
    # The default is shim.efi,shim-fedora.efi,shimx64.efi,PreLoader.efi,
    # TextMode.efi,ebounce.efi,GraphicsConsole.efi,MokManager.efi,HashTool.efi,
    # HashTool-signed.efi,bootmgr.efi
    #
    // 不要扫描那些文件
    #dont_scan_files shim.efi,MokManager.efi
    
    # Scan for Linux kernels that lack a ".efi" filename extension. This is
    # useful for better integration with Linux distributions that provide
    # kernels with EFI stub loaders but that don't give those kernels filenames
    # that end in ".efi", particularly if the kernels are stored on a
    # filesystem that the EFI can read. When set to "1", "true", or "on", this
    # option causes all files in scanned directories with names that begin with
    # "vmlinuz" or "bzImage" to be included as loaders, even if they lack ".efi"
    # extensions. Passing this option a "0", "false", or "off" value causes
    # kernels without ".efi" extensions to NOT be scanned.
    # Default is "true" -- to scan for kernels without ".efi" extensions.
    #
    // 和linux相关的
    #scan_all_linux_kernels false
    
    # Combine all Linux kernels in a given directory into a single entry.
    # When so set, the kernel with the most recent time stamp will be launched
    # by default, and its filename will appear in the entry's description.
    # To launch other kernels, the user must press F2 or Insert; alternate
    # kernels then appear as options on the sub-menu.
    # Default is "true" -- kernels are "folded" into a single menu entry.
    #
    #fold_linux_kernels false
    
    # Set the maximum number of tags that can be displayed on the screen at
    # any time. If more loaders are discovered than this value, rEFInd shows
    # a subset in a scrolling list. If this value is set too high for the
    # screen to handle, it's reduced to the value that the screen can manage.
    # If this value is set to 0 (the default), it's adjusted to the number
    # that the screen can handle.
    #
    // 引导项太多,默认将不能处理的去掉
    #max_tags 0
    
    # Set the default menu selection.  The available arguments match the
    # keyboard accelerators available within rEFInd.  You may select the
    # default loader using:
    #  - A digit between 1 and 9, in which case the Nth loader in the menu
    #    will be the default.
    #  - A "+" symbol at the start of the string, which refers to the most
    #    recently booted loader.
    #  - Any substring that corresponds to a portion of the loader's title
    #    (usually the OS's name, boot loader's path, or a volume or
    #    filesystem title).
    # You may also specify multiple selectors by separating them with commas
    # and enclosing the list in quotes. (The "+" option is only meaningful in
    # this context.)
    # If you follow the selector(s) with two times, in 24-hour format, the
    # default will apply only between those times. The times are in the
    # motherboard's time standard, whether that's UTC or local time, so if
    # you use UTC, you'll need to adjust this from local time manually.
    # Times may span midnight as in "23:30 00:30", which applies to 11:30 PM
    # to 12:30 AM. You may specify multiple default_selection lines, in which
    # case the last one to match takes precedence. Thus, you can set a main
    # option without a time followed by one or more that include times to
    # set different defaults for different times of day.
    # The default behavior is to boot the previously-booted OS.
    #
    // 默认进入第一个引导项
    #default_selection 1
    // 默认进入微软系统
    #default_selection Microsoft
    #default_selection "+,bzImage,vmlinuz"
    #default_selection Maintenance 23:30 2:00
    #default_selection "Maintenance,OS X" 1:00 2:30
    
    # Enable VMX bit and lock the CPU MSR if unlocked.
    # On some Intel Apple computers, the firmware does not lock the MSR 0x3A.
    # The symptom on Windows is Hyper-V not working even if the CPU
    # meets the minimum requirements (HW assisted virtualization and SLAT)
    # DO NOT SET THIS EXCEPT ON INTEL CPUs THAT SUPPORT VMX! See
    # http://www.thomas-krenn.com/en/wiki/Activating_the_Intel_VT_Virtualization_Feature!
    # for more on this subject.
    # The default is false: Don't try to enable and lock the MSR.
    #
    #enable_and_lock_vmx false
    
    # Tell a Mac's EFI that OS X is about to be launched, even when it's not.
    # This option causes some Macs to initialize their hardware differently than
    # when a third-party OS is launched normally. In some cases (particularly on
    # Macs with multiple video cards), using this option can cause hardware to
    # work that would not otherwise work. On the other hand, using this option
    # when it is not necessary can cause hardware (such as keyboards and mice) to
    # become inaccessible. Therefore, you should not enable this option if your
    # non-Apple OSes work correctly; enable it only if you have problems with
    # some hardware devices. When needed, a value of "10.9" usually works, but
    # you can experiment with other values. This feature has no effect on
    # non-Apple computers.
    # The default is inactive (no OS X spoofing is done).
    #
    #spoof_osx_version 10.9
    
    # Set the CSR values for Apple's System Integrity Protection (SIP) feature.
    # Values are one-byte (two-character) hexadecimal numbers. These values
    # define which specific security features are enabled. Below are the codes
    # for what the values mean. Add them up (in hexadecimal!) to set new values.
    # Apple's "csrutil enable" and "csrutil disable" commands set values of 10
    # and 77, respectively.
    #   CSR_ALLOW_UNTRUSTED_KEXTS       0x01
    #   CSR_ALLOW_UNRESTRICTED_FS       0x02
    #   CSR_ALLOW_TASK_FOR_PID          0x04
    #   CSR_ALLOW_KERNEL_DEBUGGER       0x08
    #   CSR_ALLOW_APPLE_INTERNAL        0x10
    #   CSR_ALLOW_UNRESTRICTED_DTRACE   0x20
    #   CSR_ALLOW_UNRESTRICTED_NVRAM    0x40
    #
    #csr_values 10,77
    
    # Include a secondary configuration file within this one. This secondary
    # file is loaded as if its options appeared at the point of the "include"
    # token itself, so if you want to override a setting in the main file,
    # the secondary file must be referenced AFTER the setting you want to
    # override. Note that the secondary file may NOT load a tertiary file.
    #
    // 读取自己的配置,一般引导界面美化时用到
    #include manual.conf
    include refind-theme-regular/theme.conf
    
    # Sample manual configuration stanzas. Each begins with the "menuentry"
    # keyword followed by a name that's to appear in the menu (use quotes
    # if you want the name to contain a space) and an open curly brace
    # ("{"). Each entry ends with a close curly brace ("}"). Common
    # keywords within each stanza include:
    #
    // 名字
    #  volume    - identifies the filesystem from which subsequent files
    #              are loaded. You can specify the volume by filesystem
    #              label, by partition label, or by partition GUID number
    #              (but NOT yet by filesystem UUID number).
    // 引导文件
    #  loader    - identifies the boot loader file
    // 读到内存文件
    #  initrd    - Specifies an initial RAM disk file
    // 图标文件
    #  icon      - specifies a custom boot loader icon
    // 系统类型
    #  ostype    - OS type code to determine boot options available by
    #              pressing Insert. Valid values are "MacOS", "Linux",
    #              "Windows", and "XOM". Case-sensitive.
    // 显示模式
    #  graphics  - set to "on" to enable graphics-mode boot (useful
    #              mainly for MacOS) or "off" for text-mode boot.
    #              Default is auto-detected from loader filename.
    // 参数
    #  options   - sets options to be passed to the boot loader; use
    #              quotes if more than one option should be passed or
    #              if any options use characters that might be changed
    #              by rEFInd parsing procedures (=, /, #, or tab).
    // 打开还是关闭
    #  disabled  - use alone or set to "yes" to disable this entry.
    #
    # Note that you can use either DOS/Windows/EFI-style backslashes (\)
    # or Unix-style forward slashes (/) as directory separators. Either
    # way, all file references are on the ESP from which rEFInd was
    # launched.
    # Use of quotes around parameters causes them to be interpreted as
    # one keyword, and for parsing of special characters (spaces, =, /,
    # and #) to be disabled. This is useful mainly with the "options"
    # keyword. Use of quotes around parameters that specify filenames is
    # permissible, but you must then use backslashes instead of slashes,
    # except when you must pass a forward slash to the loader, as when
    # passing a root= option to a Linux kernel.
    
    # Below are several sample boot stanzas. All are disabled by default.
    # Find one similar to what you need, copy it, remove the "disabled" line,
    # and adjust the entries to suit your needs.
    
    # A sample entry for a Linux 3.13 kernel with EFI boot stub support
    # on a partition with a GUID of 904404F8-B481-440C-A1E3-11A5A954E601.
    # This entry includes Linux-specific boot options and specification
    # of an initial RAM disk. Note uses of Linux-style forward slashes.
    # Also note that a leading slash is optional in file specifications.
    // 菜单名字
    menuentry Linux {
        // 使用的图标
        icon EFI/refind/icons/os_linux.png
        volume 904404F8-B481-440C-A1E3-11A5A954E601
        loader bzImage-3.3.0-rc7
        initrd initrd-3.3.0.img
        options "ro root=UUID=5f96cafa-e0a7-4057-b18f-fa709db5b837"
        // 启用或关闭
        disabled
    }
    
    # A sample entry for loading Ubuntu using its standard name for
    # its GRUB 2 boot loader. Note uses of Linux-style forward slashes
    menuentry Ubuntu {
        loader /EFI/ubuntu/grubx64.efi
        icon /EFI/refind/icons/os_linux.png
        disabled
    }
    
    # A minimal ELILO entry, which probably offers nothing that
    # auto-detection can't accomplish.
    menuentry "ELILO" {
        loader \EFI\elilo\elilo.efi
        disabled
    }
    
    # Like the ELILO entry, this one offers nothing that auto-detection
    # can't do; but you might use it if you want to disable auto-detection
    # but still boot Windows....
    menuentry "Windows 7" {
        loader \EFI\Microsoft\Boot\bootmgfw.efi
        disabled
    }
    
    # EFI shells are programs just like boot loaders, and can be
    # launched in the same way. You can pass a shell the name of a
    # script that it's to run on the "options" line. The script
    # could initialize hardware and then launch an OS, or it could
    # do something entirely different.
    menuentry "Windows via shell script" {
        icon \EFI\refind\icons\os_win.png
        loader \EFI\tools\shell.efi
        options "fs0:\EFI\tools\launch_windows.nsh"
        disabled
    }
    
    # Mac OS is normally detected and run automatically; however,
    # if you want to do something unusual, a manual boot stanza may
    # be the way to do it. This one does nothing very unusual, but
    # it may serve as a starting point. Note that you'll almost
    # certainly need to change the "volume" line for this example
    # to work.
    menuentry "My Mac OS X" {
        icon \EFI\refind\icons\os_mac.png
        volume "OS X boot"
        loader \System\Library\CoreServices\boot.efi
        disabled
    }


展开阅读全文

没有更多推荐了,返回首页