Activiti发布
jbpm4的开发成员tom离开了jboss后,加入afresco公司,并且才有activiti5的项目,这开源项目继承了jbpm4的所有优点,同时将其发扬光大,相对jbpm4,activiti5改进了储多我们国内开发人员关心的问题,如:
- 流程代办
- 在线流程设计器
- 流程嵌入式部署
- 流程独立部署
- 动流程节点
- 自由流程
- 支持了bpmn2的标准
- 支持规则引擎
activiti 5 底层上的api跟jbpm4的api相似程序也达60%以上,特别是service提供的接口,都是在jbpm4上提供扩展,大大方便了jbpm4的开发人员,这也是tom的先明之处,毕竟jbpm原来打的品牌效应不可否认的,把原来的jbpm4积累的人气再次带至activiti5上,这也将是该项目能够断续前进的重要保障。
尽管activiti5目前发展趋势前途光明,但其也有不足的地方,其前端的的表现总是存在不足,如在线流程设计器,目前eclipse插件生成的bpmn20.xml文件则不行,而官方提供的activiti-modler设计器,扩展及实现均面临困难,并且对浏览器的要求让它在国内的项目实施总会面临技术难度。
宏天estbpm3则又是一个基于activiti5的产品,并且公司也有打算断续原来的产品销售模式,对企业开放源代码,而原来的设计器通过改进后,则可以直接支持activiti5的流程设计的需要,如:
设计器按设计器生成一份文档格式,通过系统中提供的xslt转化文档,完成转化后,生成bpmn20的格式文档,该文档可被activiti5直接识别。
其设计器及转化效果如下所示:
发布后,通过activiti5的api生成的流程图如下所示:
设计器原生成的文档格式:
- <diagram xmlns:bg="bpm.graphic" xmlns:ciied="com.hotent.bpm.editor"
- xmlns:fg="flash.geom">
- <bg:Task id="task1" height="50" user="true" width="90" x="230"
- y="110">
- <label>用户任务1</label>
- <ports>
- <ciied:Port id="port1" clipOnShape="true" movable="false" />
- <ciied:Port id="port2" x="0" />
- <ciied:Port id="port3" y="1" />
- <ciied:Port id="port4" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:Task>
- <bg:StartEvent id="startEvent1" height="46" width="31" x="60"
- y="119.5">
- <label>开始</label>
- <ports>
- <ciied:Port id="port5" clipOnShape="true" movable="false" />
- <ciied:Port id="port6" x="1" />
- <ciied:Port id="port7" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:StartEvent>
- <bg:SubProcess id="subProcess1" automaticGraphLayout="false"
- expandedHeight="210" expandedWidth="570" height="210" width="570" x="360"
- y="230">
- <label>子流程</label>
- <ports>
- <ciied:Port id="port8" clipOnShape="true" movable="false" />
- <ciied:Port id="port9" x="0" />
- <ciied:Port id="port10" y="0" />
- <ciied:Port id="port11" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- <ciied:Port id="port12" horizontalOffset="-5" y="1">
- <id>BOTTOM</id>
- </ciied:Port>
- <ciied:Port id="port13" horizontalOffset="5" y="1">
- <id>BOTTOM</id>
- </ciied:Port>
- </ports>
- <bg:Task id="task2" height="50" user="true" width="90" x="180"
- y="53">
- <label>用户任务2</label>
- <ports>
- <ciied:Port id="port14" clipOnShape="true" movable="false" />
- <ciied:Port id="port15" x="0" />
- <ciied:Port id="port16" x="1" />
- <ciied:Port id="port17" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:Task>
- <bg:StartEvent id="startEvent2" height="46" width="32"
- x="29" y="62.5">
- <label>开始2</label>
- <ports>
- <ciied:Port id="port18" clipOnShape="true" movable="false" />
- <ciied:Port id="port19" x="1" />
- <ciied:Port id="port20" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:StartEvent>
- <bg:SequenceFlow id="sequenceFlow1" endPort="port15"
- startPort="port19">
- <fallbackEndPoint>
- <fg:Point id="point1" x="198" y="58" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point2" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:EndEvent id="endEvent1" height="49" width="34" x="380"
- y="61">
- <label>结束2</label>
- <ports>
- <ciied:Port id="port21" clipOnShape="true" movable="false" />
- <ciied:Port id="port22" x="0" />
- <ciied:Port id="port23" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:EndEvent>
- <bg:SequenceFlow id="sequenceFlow2" endPort="port22"
- startPort="port16">
- <fallbackEndPoint>
- <fg:Point id="point3" x="364" y="68" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point4" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- </bg:SubProcess>
- <bg:EndEvent id="endEvent2" height="49" width="34" x="740"
- y="120">
- <label>结束1</label>
- <ports>
- <ciied:Port id="port24" clipOnShape="true" movable="false" />
- <ciied:Port id="port25" x="0" />
- <ciied:Port id="port26" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- </ports>
- </bg:EndEvent>
- <bg:SequenceFlow id="sequenceFlow3" endPort="port2"
- startPort="port6">
- <fallbackEndPoint>
- <fg:Point id="point5" x="237" y="125" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point6" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:SequenceFlow id="sequenceFlow4" endPort="port9"
- startPort="port3">
- <fallbackEndPoint>
- <fg:Point id="point7" x="396" y="461" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point8" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:SequenceFlow id="sequenceFlow5" endPort="port25"
- startPort="port10">
- <fallbackEndPoint>
- <fg:Point id="point9" x="674" y="191" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point10" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:Task id="task3" height="50" user="true" width="90" x="440"
- y="520">
- <label>用户任务3</label>
- <ports>
- <ciied:Port id="port27" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- <ciied:Port id="port28" y="0">
- <id>TOP</id>
- </ciied:Port>
- <ciied:Port id="port29" y="1">
- <id>BOTTOM</id>
- </ciied:Port>
- </ports>
- </bg:Task>
- <bg:SequenceFlow id="sequenceFlow6" endPort="port28"
- startPort="port12">
- <fallbackEndPoint>
- <fg:Point id="point11" x="623" y="568" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point12" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:Task id="task4" height="50" user="true" width="90" x="750"
- y="520">
- <label>用户任务4</label>
- <ports>
- <ciied:Port id="port30" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- <ciied:Port id="port31" y="0">
- <id>TOP</id>
- </ciied:Port>
- <ciied:Port id="port32" y="1">
- <id>BOTTOM</id>
- </ciied:Port>
- </ports>
- </bg:Task>
- <bg:SequenceFlow id="sequenceFlow7" endPort="port31"
- startPort="port13">
- <fallbackEndPoint>
- <fg:Point id="point13" x="760" y="536" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point14" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:EndEvent id="endEvent3" height="49" width="34" x="620"
- y="630">
- <label>结束3</label>
- <ports>
- <ciied:Port id="port33" clipOnShape="true" movable="false">
- <id>CENTER</id>
- </ciied:Port>
- <ciied:Port id="port34" x="1">
- <id>RIGHT</id>
- </ciied:Port>
- <ciied:Port id="port35" x="0">
- <id>LEFT</id>
- </ciied:Port>
- </ports>
- </bg:EndEvent>
- <bg:SequenceFlow id="sequenceFlow8" endPort="port35"
- startPort="port29">
- <fallbackEndPoint>
- <fg:Point id="point15" x="632" y="653" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point16" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- <bg:SequenceFlow id="sequenceFlow9" endPort="port34"
- startPort="port32">
- <fallbackEndPoint>
- <fg:Point id="point17" x="688" y="651" />
- </fallbackEndPoint>
- <fallbackStartPoint>
- <fg:Point id="point18" />
- </fallbackStartPoint>
- <label></label>
- </bg:SequenceFlow>
- </diagram>
通过XSLT转化后的文档格式:
- <?xml version="1.0" encoding="utf-8"?>
- <definitions xmlns="http://www.omg.org/spec/BPMN/20100524/MODEL"
- xmlns:ciied="com.ibm.ilog.elixir.diagram" xmlns:bg="bpm.graphic"
- xmlns:fn="http://www.w3.org/2005/02/xpath-functions" xmlns:omgdi="http://www.omg.org/spec/DD/20100524/DI"
- xmlns:omgdc="http://www.omg.org/spec/DD/20100524/DC" xmlns:bpmndi="http://www.omg.org/spec/BPMN/20100524/DI"
- xmlns:activiti="http://activiti.org/bpmn" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- targetNamespace="http://www.activiti.org/test" expressionLanguage="http://www.w3.org/1999/XPath"
- typeLanguage="http://www.w3.org/2001/XMLSchema">
- <process id="subGraph2" name="子流程">
- <startEvent id="startEvent1" name="开始" />
- <endEvent id="endEvent2" name="结束1" />
- <endEvent id="endEvent3" name="结束3" />
- <userTask id="task1" name="用户任务1" />
- <userTask id="task3" name="用户任务3" />
- <userTask id="task4" name="用户任务4" />
- <sequenceFlow id="sequenceFlow3" name="" sourceRef="startEvent1"
- targetRef="task1" />
- <sequenceFlow id="sequenceFlow4" name="" sourceRef="task1"
- targetRef="subProcess1" />
- <sequenceFlow id="sequenceFlow5" name="" sourceRef="subProcess1"
- targetRef="endEvent2" />
- <sequenceFlow id="sequenceFlow6" name="" sourceRef="subProcess1"
- targetRef="task3" />
- <sequenceFlow id="sequenceFlow7" name="" sourceRef="subProcess1"
- targetRef="task4" />
- <sequenceFlow id="sequenceFlow8" name="" sourceRef="task3"
- targetRef="endEvent3" />
- <sequenceFlow id="sequenceFlow9" name="" sourceRef="task4"
- targetRef="endEvent3" />
- <subProcess id="subProcess1" name="子流程">
- <startEvent id="startEvent2" name="开始2" />
- <endEvent id="endEvent1" name="结束2" />
- <userTask id="task2" name="用户任务2" />
- <sequenceFlow id="sequenceFlow1" name="" sourceRef="startEvent2"
- targetRef="task2" />
- <sequenceFlow id="sequenceFlow2" name="" sourceRef="task2"
- targetRef="endEvent1" />
- </subProcess>
- </process>
- <bpmndi:BPMNDiagram id="BPMNDiagram_subGraph2">
- <bpmndi:BPMNPlane bpmnElement="subGraph2" id="BPMNPlane_subGraph2">
- <bpmndi:BPMNShape bpmnElement="startEvent1"
- id="BPMNShape_startEvent1">
- <omgdc:Bounds height="31" width="31" x="60" y="119.5" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="startEvent2"
- id="BPMNShape_startEvent2">
- <omgdc:Bounds height="32" width="32" x="389.0" y="292.5" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="endEvent1" id="BPMNShape_endEvent1">
- <omgdc:Bounds height="34" width="34" x="740.0" y="291.0" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="endEvent2" id="BPMNShape_endEvent2">
- <omgdc:Bounds height="34" width="34" x="740" y="120" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="endEvent3" id="BPMNShape_endEvent3">
- <omgdc:Bounds height="34" width="34" x="620" y="630" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="task1" id="BPMNShape_task1">
- <omgdc:Bounds height="50" width="90" x="230" y="110" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="task2" id="BPMNShape_task2">
- <omgdc:Bounds height="50" width="90" x="540.0" y="283.0" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="task3" id="BPMNShape_task3">
- <omgdc:Bounds height="50" width="90" x="440" y="520" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="task4" id="BPMNShape_task4">
- <omgdc:Bounds height="50" width="90" x="750" y="520" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNShape bpmnElement="subProcess1"
- id="BPMNShape_subProcess1">
- <omgdc:Bounds height="210" width="570" x="360" y="230" />
- </bpmndi:BPMNShape>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow1" id="BPMNEdge_sequenceFlow1">
- <omgdi:waypoint x="421.0" y="308.5"></omgdi:waypoint>
- <omgdi:waypoint x="480.5" y="308.5"></omgdi:waypoint>
- <omgdi:waypoint x="480.5" y="308.0"></omgdi:waypoint>
- <omgdi:waypoint x="540.0" y="308.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow2" id="BPMNEdge_sequenceFlow2">
- <omgdi:waypoint x="630.0" y="308.0"></omgdi:waypoint>
- <omgdi:waypoint x="740.0" y="308.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow3" id="BPMNEdge_sequenceFlow3">
- <omgdi:waypoint x="91.0" y="135.0"></omgdi:waypoint>
- <omgdi:waypoint x="230.0" y="135.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow4" id="BPMNEdge_sequenceFlow4">
- <omgdi:waypoint x="275.0" y="160.0"></omgdi:waypoint>
- <omgdi:waypoint x="275.0" y="335.0"></omgdi:waypoint>
- <omgdi:waypoint x="360.0" y="335.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow5" id="BPMNEdge_sequenceFlow5">
- <omgdi:waypoint x="645.0" y="230.0"></omgdi:waypoint>
- <omgdi:waypoint x="645.0" y="137.0"></omgdi:waypoint>
- <omgdi:waypoint x="740.0" y="137.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow6" id="BPMNEdge_sequenceFlow6">
- <omgdi:waypoint x="640.0" y="440.0"></omgdi:waypoint>
- <omgdi:waypoint x="640.0" y="480.0"></omgdi:waypoint>
- <omgdi:waypoint x="485.0" y="480.0"></omgdi:waypoint>
- <omgdi:waypoint x="485.0" y="520.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow7" id="BPMNEdge_sequenceFlow7">
- <omgdi:waypoint x="650.0" y="440.0"></omgdi:waypoint>
- <omgdi:waypoint x="650.0" y="480.0"></omgdi:waypoint>
- <omgdi:waypoint x="795.0" y="480.0"></omgdi:waypoint>
- <omgdi:waypoint x="795.0" y="520.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow8" id="BPMNEdge_sequenceFlow8">
- <omgdi:waypoint x="485.0" y="570.0"></omgdi:waypoint>
- <omgdi:waypoint x="485.0" y="647.0"></omgdi:waypoint>
- <omgdi:waypoint x="620.0" y="647.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- <bpmndi:BPMNEdge bpmnElement="sequenceFlow9" id="BPMNEdge_sequenceFlow9">
- <omgdi:waypoint x="795.0" y="570.0"></omgdi:waypoint>
- <omgdi:waypoint x="795.0" y="647.0"></omgdi:waypoint>
- <omgdi:waypoint x="654.0" y="647.0"></omgdi:waypoint>
- </bpmndi:BPMNEdge>
- </bpmndi:BPMNPlane>
- </bpmndi:BPMNDiagram>
- </definitions>
转成后,则直接通过以下api可发布至流程引擎:
- Deployment deployment= repositoryService.createDeployment().name(bpmDefinition.getSubject()).addString(bpmDefinition.getSubject()+".bpmn20.xml",actFlowDefXml).deploy();
activiti-explorer源码下载地址:https://github.com/HSSC/activiti-explorer