Keepalived+LVS-DR模式配置高可用负载均衡集群

最新推荐文章于 2021-11-26 10:20:45 发布
最新推荐文章于 2021-11-26 10:20:45 发布
阅读量661 收藏
点赞数
分类专栏： LVS 文章标签： LVS Keepalived
环境: 虚拟机:VMware Workstation
          操作系统:CentOS 5.5

一、keepalived+lvs-DR模式配置高可用负载均衡

拓扑如下：


二、服务器ip配置信息

1. ip_lb 主机(master) :

 

2.ip_lb_2 主机 (backup)


3.web1 主机

4.web2 主机



三、在master和backup分别查看是否有ipvsadm软件

1. 检查ipvsadm是否安装成功.可以直接输入

[root@localhost ~]# ipvsadm

IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port Forward Weight ActiveConn InActConn
 
2. 检查模版是否加入内核
[root@localhost ~]# lsmod |grep ip_vs
 ip_vs 78081 0 

四、分别在web1和web2上面安装apache服务.
#  安装apache服务不说明了.  开放的端口是:8099

五、在master主机(192.168.96.2)和backup主机(192.168.96.22)上安装keepalived
1. keepalived-1.2.1.tar.gz     # 解压这个文件并且安装 (tar -zxvf keepalived-1.2.1.tar.gz)
2. ./configure --prefix=/home/keepalived/ --with-kernel-dir=/usr/src/kernels/2.6.18-164.el5-i686
3.make
4.make install
5.配置文件的路径
cp /home/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
cp /home/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
cp /home/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /home/keepalived/sbin/keepalived /sbin/

6.配置keepalived.conf文件.( ip_lb 主机<master> )
vim /etc/keepalived/keepalived.conf
[plain]  view plain copy
  1. #global define  
  2. global_defs {  
  3. router_id LVS_T1  
  4. }  
  5.   
  6.   
  7. vrrp_sync_group bl_group {  
  8. group {  
  9.   bl_one  
  10. }  
  11. }  
  12.   
  13. vrrp_instance bl_one {  
  14.     state MASTER  
  15.     interface eth0  
  16.     lvs_sync_daemon_interface eth0  
  17.     virtual_router_id 38  
  18.     priority 150  
  19.     advert_int 3  
  20.     authentication {  
  21.         auth_type PASS  
  22.         auth_pass 1111  
  23.     }  
  24.     virtual_ipaddress {  
  25.       192.168.96.100  
  26.     }  
  27. }  
  28.   
  29.   
  30. virtual_server 192.168.96.100 8099 {  
  31.     delay_loop 3  
  32.     lb_algo rr  
  33.     lb_kind DR  
  34.     persistence_timeout 1  
  35.     protocol TCP  
  36.   
  37.   
  38.     real_server 192.168.96.33 8099 {  
  39.         weight 1                                                                                                                                        
  40.         TCP_CHECK {                                                                                                                                     
  41.             connect_timeout 10                                                                                                                          
  42.             nb_get_retry 3                                                                                                                              
  43.             delay_before_retry 3                                                                                                                        
  44.             connect_port 8099                                                                                                                           
  45.         }                                                                                                                                               
  46.                                                                                                                                                         
  47.     }                                                                                                                                                   
  48.                                                                                                                                                         
  49.     real_server 192.168.96.4 8099 {                                                                                                                     
  50.         weight 1                                                                                                                                        
  51.         TCP_CHECK {                                                                                                                                     
  52.             connect_timeout 10                                                                                                                          
  53.             nb_get_retry 3                                                                                                                              
  54.             delay_before_retry 3                                                                                                                        
  55.             connect_port 8099                                                                                                                           
  56.         }                                                                                                                                               
  57.     }                                                                                                                                                   
  58. }                   

7、配置keepalived.conf文件.(ip_lb_2 主机 <backup> )
vim /etc/keepalived/keepalived.conf
[plain]  view plain copy
  1. #global define  
  2. global_defs {  
  3. router_id LVS_T2  
  4. }  
  5.   
  6.   
  7. vrrp_sync_group bl_group {  
  8. group {  
  9.   bl_one  
  10. }  
  11. }  
  12.   
  13. vrrp_instance bl_one {  
  14.     state BACKUP  
  15.     interface eth0  
  16.     lvs_sync_daemon_interface eth0  
  17.     virtual_router_id 38  
  18.     priority 120  
  19.     advert_int 3  
  20.     authentication {  
  21.         auth_type PASS  
  22.         auth_pass 1111  
  23.     }  
  24.     virtual_ipaddress {  
  25.       192.168.96.100  
  26.     }  
  27. }  
  28.   
  29.   
  30. virtual_server 192.168.96.100 8099 {  
  31.     delay_loop 3  
  32.     lb_algo rr  
  33.     lb_kind DR  
  34.     persistence_timeout 1  
  35.     protocol TCP  
  36.   
  37.   
  38.     real_server 192.168.96.33 8099 {                                                                                                                    
  39.         weight 1                                                                                                                                        
  40.         TCP_CHECK {                                                                                                                                     
  41.             connect_timeout 10                                                                                                                          
  42.             nb_get_retry 3                                                                                                                              
  43.             delay_before_retry 3                                                                                                                        
  44.             connect_port 8099                                                                                                                           
  45.         }                                                                                                                                               
  46.                                                                                                                                                         
  47.     }                                                                                                                                                   
  48.                                                                                                                                                         
  49.     real_server 192.168.96.4 8099 {                                                                                                                     
  50.         weight 1                                                                                                                                        
  51.         TCP_CHECK {                                                                                                                                     
  52.             connect_timeout 10                                                                                                                          
  53.             nb_get_retry 3                                                                                                                              
  54.             delay_before_retry 3                                                                                                                        
  55.             connect_port 8099                                                                                                                           
  56.         }                                                                                                                                               
  57.     }                                                                                                                                                   
  58. }        

8. 分别在主备上启动keepalived
[root@ip_lb home]# /etc/init.d/keepalived start
Starting keepalived: [  OK  ]

[root@ip_lb home]# tail -f /var/log/message


# PS:这里说的LVS.并不是用ipvsadm软件配置.而是直接用keepalived的virtual_server配置项控制的.
#  安装ipvsadm只是可以看到负载状况.其实只需要keepalived也可以实现负载均衡集群.

六、在web1和web2主机上配置LVS-DR的相关配置.
1. vim /etc/init.d/lvsDR_node   （web1主机）
[plain]  view plain copy
  1. #! /bin/sh   
  2. # descript : start real server DR  
  3. VIP=192.168.96.100  
  4. . /etc/rc.d/init.d/functions  
  5. case "$1" in  
  6.        start)  
  7.              echo "start LVS of RealServer DR"  
  8.              /sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up  
  9.              echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore  
  10.              echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce  
  11.                ;;  
  12.        stop)  
  13.              /sbin/ifconfig lo:0 down  
  14.              echo "close LVS of RealServer DR"  
  15.              echo "0" > /proc/sys/net/ipv4/conf/all/arp_ignore  
  16.              echo "0" > /proc/sys/net/ipv4/conf/all/arp_announce  
  17.               ;;  
  18.          *)  
  19.               echo "Usage : $0 {start|stop}"  
  20.               exit 1  
  21. esac  

2. 把这个文件复制到web2主机上.
3. 在web1和web2上分别启动这个脚本:
    /etc/init.d/lvsDR_node start
七、web1和web2主机上开启httpd服务.
/etc/init.d/httpd start

# ================= TEST =======================================

八、测试是否可以负载均衡.
编写测试脚本:
[plain]  view plain copy
  1. #! /bin/sh  
  2. for((i=1;i<=100;i++));do   
  3. curl http://192.168.96.100:8099 >> /tmp/q;  
  4. done  

结果:


九、测试断开一个web服务或加入一个web服务
现在关闭 web2主机(192.168.96.4) 的web 服务..
查看日志可以看到:


现在再把 web2主机(192.168.96.4)的web 服务加入进来:
查看日志可以看到:


十、 测试HA
现在模拟主(master)的keepalived主机死掉. 
备机的日志文件:


可以看到备机的keepalived已经开始工作....

整个部署就完成了.

官方参考中文文档:http://www.keepalived.org/pdf/sery-lvs-cluster.pdf

zwz1984
关注
专栏目录
LVS+keepalived+nginx搭建高可用负载均衡集群(详细配置步骤讲解)
weixin_53572775的博客
08-17 5621
一.准备工作 首先我们要准备四台虚拟机如下表所示: 主机 IP MASTER 192.168.204.130 192.168.204.208(VIP) real_server1 192.168.204.135 real_server2 192.168.204.137 BACKUP 192.168.204.138 1.在主机和备机上都要安装LVS和keepalived: 安装LVS:yum install ipvsad...
用keepalived+lvs_dr搭建高可用的负载均衡集群
Gmoon23的博客
06-07 551
keepalived+lvs搭建一个高可用的负载均衡集群 VRRP：虚拟路由冗余协议
高可用负载均衡集群Keepalived+lvs-DR模式的搭建
Adhuyanchong的博客
07-27 570
实验环境：redhat6.5 server1:172.25.20.1 server2:172.25.20.2 server3:172.25.20.3 server4:172.25.20.4又一个避免单点故障的方法：将DR添加到HA的keepalived中。keepalived对后端有健康检查，则在安装好keepalived之后可直接添加DR。1.源码安装keepalived[root@serve
keepalived+LVS-DR模式
qq_57258570的博客
11-26 578
LVS的DR模式+keepalived keepalived+LVS-DR模式 ---------client---------主LVS---------从LVS---------WEB1---------WEB2-------- 192.168.6.1 192.168.6.20 192.168.6.200 192.168.6.30 192.168.6.50 lo:0:192.168.6.254 lo:0:192.168.6.254 ...
LVS-DR+Keepalived 高可用集群搭建
qq_45631844的博客
11-11 370
过多关于LVS-DR+keepalive相关的理论这里就不做过多的讲解了，直接开始实验 测试环境 主机 IP地址 主LVS负载调度器 192.168.1.10 备LVS负载调度器 192.168.1.20 Apache服务器1 192.168.1.30 Apache服务器2 192.168.1.40 客户端 IP地址自定义 搭建过程 所有主机均执行以下操作 [root@localhost ~]# systemctl stop firewalld [root@localh
CentOS7下Keepalived+LVS-DR高可用负载均衡配置实战
总结来说，Keepalived + LVS-DR的组合是构建高可用负载均衡系统的一种强大工具，适用于需要确保服务连续性和高可用性的企业级应用。通过精心配置和维护，可以确保即使在服务器出现问题时，用户仍然能够无感知地继续...
Keepalived + LVS(DR) 高可用负载均衡集群
04-17
总的来说，“Keepalived + LVS(DR)”方案是构建高可用负载均衡集群的一种有效方法，它结合了Keepalived的高可用性和LVS的高效负载均衡能力，为大型网站和企业级应用提供了稳定、可靠的服务器架构。
keepalived+lvs集群负载均衡配置
08-22
### keepalived + LVS-DR模式配置高可用负载均衡详解 #### 一、概述 在现代互联网架构中，为了确保服务的高可用性和负载均衡，通常会采用一系列技术手段来实现这一目标。其中，Keepalived 和 LVS 组合是一种常用的...
lvs+keepalive
04-08
NULL 博文链接：https://stevenfeng.iteye.com/blog/1611295
使用Keepalived构建LVS-DR模式的高可用集群
suifengOc的博客
08-16 203
Keepalived介绍 keepalived 是一个类似于 layer3, 4 & 5 交换机制的软件，也就是我们平时说的第 3 层、第 4 层和第 5层交换。 Keepalived 的作用是检测 web 服务器的状态，如果有一台 web 服务器死机，或工作出现故障，Keepalived 将检测到，并将有故障的 web 服务器从系统中剔除，当 web 服务器工作正常后 Keepalive...
keepalived+lvs-dr模式搭建
非衣鲲化的博客
11-22 265
前面讲了怎么搭建nat模式和dr模式，但是负载均衡器如果只有一个的话，那么负载均衡器就成了瓶颈，当这一个负载均衡器挂掉以后，那整个网络就瘫痪了，所以要保持lvs的高可用，需要搭配keepalived来实现lvs的高可用，也就是主备负载均衡器，当两个负载均衡器都正常的时候那么主负载均衡器工作，而当主负载均衡器挂掉以后那么就从负载均衡器工作。当再把主负载均衡器开启以后那么，在回归主负载均衡器工作。下面...
keepalive+lvs
jackiosNeal的博客
09-24 257
安装keepalive +lvs的master主机 Ip 192.168.195.131 1.安装master组件和依赖包 1 yuminstallkeepalivedipvsadmgccopensslopenssl-devel-y 2.备份keepalived的配置文件 1 cp/etc/keepalived/keepalived.conf{,.bak} 3.编辑配置文件 1 ...
keepalive+LVS
yingqianmeng的博客
10-09 1462
一、keepalive+LVS（DR） 最少需要4台服务器 两台LVS调度器、两台真实服务器 两台LVS调度器上安装keepalive，形成热备份 （一）配置LVS调度器 1.安装相关依赖包和编译环境 yum -y install gcc gcc-c++ yum -y install kernel-devel openssl-devel popt-devel ipvs...
LVS(DR模式)与keepalived实现负载均衡高可用集群
qq_43511217的博客
04-17 287
1.将server1配置好的yum源发送给server4 scp /etc/yum.repos.d/rhel-source.repo server4:/etc/yum.repos.d/ 2.获取keepalived-2.0.6.tar.gz并解压 tar zxf keepalived-2.0.6.tar.gz 3.进入解压好的keepalived-2.0.6目录下，进行源码编译 cd kee...
Keepalive + Lvs 实现高可用负载均衡
qq_49286390的博客
01-15 871
实验环境搭建 在linux环境中，通过母盘是redhat7.6的操作系统，克隆搭建四台域名分别为node1,node2, node3，node4; 主机名分别为server1,server2,server3, server4的四台虚拟机。(名称可以任选) 给四台主机分别配置好各自的ip地址和dns地址解析，实现四台虚拟机可以互相ping通。 对于虚拟机的ip和对应的dns解析可以参考 在这里插入图片描述 配置好四台主机的yum源仓库，（可以通过宿主机的httpd服务，搭建网络仓库） 关闭掉所有虚拟机的防火墙
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值