sd卡烧录--sdfuse命令分析

=========================================

cmd_fastboot.c

命令格式：

sdfuse flash kernel zImage

sdfuse flash system system.ext3

=========================================
[cpp] view plaincopyprint?

int do_sdfuse (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int ret = 1;
int enable_reset = 0;
struct mmc *mmc = find_mmc_device(CFG_FASTBOOT_SDFUSE_MMCDEV);

if (mmc_init(mmc)) {
printf("sdmmc init is failed.\n");
}

interface.nand_block_size = CFG_FASTBOOT_PAGESIZE * 64;
interface.transfer_buffer = (unsigned char *) CFG_FASTBOOT_TRANSFER_BUFFER;
interface.transfer_buffer_size = CFG_FASTBOOT_TRANSFER_BUFFER_SIZE;
//add by <a href="mailto:xiao@2012-04-17">xiao@2012-04-17</a> ：当emmc为空片时，可以支持sd卡直接格式化emmc，并分区。
#ifdef CONFIG_EMMC_INAND
printf("[ Check emmc 0 MBR label..]\n");
if(fdisk_emmc0_partition() == 0){
//format_part_dos(); //mmcblk0p1
format_part_ext3(2); //mmcblk0p2
format_part_ext3(3); //mmcblk0p3
format_part_ext3(4); //mmcblk0p4
}
#endif

printf("[Fusing Image from SD Card.]\n");

if (set_partition_table())
return 1;
if ((argc == 2) && !strcmp(argv[1], "flashall"))
{

//sdfuse flash bootloader u-boot.bin
//sdfuse flash kernel kernel.img
//sdfuse flash ramdisk ramdisk.img
//sdfuse flash system system.img
//add by xiao@2012-04-17 修改文件，支持sd烧写
if (update_from_sd("bootloader", "u-boot_emmc.bin"))
goto err_sdfuse;

if (update_from_sd("kernel", "zImage"))
goto err_sdfuse;

if (update_from_sd("system", "system.ext3"))
goto err_sdfuse;

if (update_from_sd("userdata", NULL))
goto err_sdfuse;

if (update_from_sd("cache", NULL))
goto err_sdfuse;
delay1s();
delay1s();
delay1s();
enable_reset = 1;
ret = 0;
}
else if ((argc == 4) && !strcmp(argv[1], "flash"))
{
LCD_turnon();

if (update_from_sd(argv[2], argv[3]))
goto err_sdfuse;

ret = 0;
}
else if ((argc == 3) && !strcmp(argv[1], "erase"))
{
LCD_turnon();

if (update_from_sd(argv[2], NULL))
goto err_sdfuse;

ret = 0;
}
else
{
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}



err_sdfuse:
LCD_setfgcolor(0x000010);
LCD_setleftcolor(0x000010);
LCD_setprogress(100);

if (enable_reset)
do_reset (NULL, 0, 0, NULL);

return ret;
}

[cpp] view plaincopyprint?

static int update_from_sd (char *part, char *file)
{
int ret = 1;

/* Read file */
if (file != NULL)
{
long size;
unsigned long offset;
unsigned long count;
char filename[32];
block_dev_desc_t *dev_desc=NULL;

printf("Partition: %s, File: %s/%s\n", part, CFG_FASTBOOT_SDFUSE_DIR, file);
// LCD_setfgcolor(0x2E8B57);
// LCD_setprogress(100);
dev_desc = get_dev("mmc", CFG_FASTBOOT_SDFUSE_MMCDEV);
if (dev_desc == NULL) {
printf ("** Invalid boot device **\n");
return 1;
}
if (fat_register_device(dev_desc, CFG_FASTBOOT_SDFUSE_MMCPART) != 0) {
printf ("** Invalid partition **\n");
return 1;
}
sprintf(filename, "%s/%s", CFG_FASTBOOT_SDFUSE_DIR, file);
offset = CFG_FASTBOOT_TRANSFER_BUFFER;
count = 0;
size = file_fat_read (filename, (unsigned char *) offset, count);

if (size == -1) {
printf("Failed to read %s\n", filename);
return 1;
}

download_size = 0; // should be 0
download_bytes = size;

printf ("%ld (0x%08x) bytes read\n", size, size);
}
else {
printf("Partition: %s\n", part);

download_size = 0; // should be 0
download_bytes = 0;
}

/* Write image into partition */
/* If file is empty or NULL, just erase the part. */
{
char command[32];

if (download_bytes == 0)
sprintf(command, "%s:%s", "erase", part);
else
sprintf(command, "%s:%s", "flash", part);
//最后还是调用fastboot的这个接口，来烧写文件。
ret = rx_handler(command, sizeof(command));
}

return ret;
}


SD卡支持自动格式，分区emmc命令：
[cpp] view plaincopyprint?

//add by xiao@2012-04-17 for: test emmc 0 format partition
#ifdef CONFIG_EMMC_INAND
//ext3format
static void format_part_ext3(int dev_num)
{
char run_cmd[80];
int status = 1;
char response[65];

sprintf(run_cmd, "ext3format mmc 0:%d",dev_num);
status = run_command(run_cmd, 0);
if (status)
{
sprintf(response,"FAILfailed to ext3format partition");
}
else
{
//printf("partition [ %d ] erased\n", dev_num);
sprintf(response, "OKAY");
}

fastboot_tx_status(response, strlen(response), FASTBOOT_TX_ASYNC);

}
//vfat
static void format_part_dos ()
{
char run_cmd[80];
int status = 1;
char response[65];

sprintf(run_cmd, "fatformat mmc 0:1");
status = run_command(run_cmd, 0);
if (status)
{
sprintf(response,"FAILfailed to fatformat partition");
}
else
{
//printf("partition '%s' fatformat\n", "fat");
sprintf(response, "OKAY");
}

fastboot_tx_status(response, strlen(response), FASTBOOT_TX_ASYNC);
}

//fdisk partition
int fdisk_emmc0_partition()
{
unsigned char buffer[512];
block_dev_desc_t *dev_desc=NULL;
char run_cmd[80];
int status = 1;
char response[65];
int ret =1;

struct mmc *mmc = find_mmc_device(0);

if (mmc_init(mmc)) {
printf("emmc 0 init is failed.\n");
}

dev_desc = get_dev("mmc", 0);
if (dev_desc == NULL) {
printf ("** Invalid boot device : emmc 0 **\n");
return ret;
}
//检测是否是MBR分区列表
if ((dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1) ||
(buffer[0x1fe] != 0x55 ||
buffer[0x1ff] != 0xaa)) {
printf ("bad MBR sector! so fdisk emmc 0 now\n");

sprintf(run_cmd, "fdisk -c 0");
status = run_command(run_cmd, 0);
if (status)
{
sprintf(response,"FAILfailed to fdisk emmc 0");
}
else
{
printf("fdisk emmc 0 success! \n");
sprintf(response, "OKAY");
}
ret =status;
fastboot_tx_status(response, strlen(response), FASTBOOT_TX_ASYNC);
}
return ret;
}
#endif

转自http://blog.csdn.net/yunfly163/article/details/7497160