网页播放器的参数含义 Windows Media Player 网页播放器

(默认0为否，-1或1为是)
<object   classid= "clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95 "   id= "MediaPlayer1 "   width= "286 "   height= "225 ">
    <param   name= "AudioStream "   value= "-1 ">
    <param   name= "AutoSize "   value= "-1 ">
    <!--是否自动调整播放大小-->
    <param   name= "AutoStart "   value= "-1 ">
    <!--是否自动播放-->
    <param   name= "AnimationAtStart "   value= "-1 ">
    <param   name= "AllowScan "   value= "-1 ">
    <param   name= "AllowChangeDisplaySize "   value= "-1 ">
    <param   name= "AutoRewind "   value= "0 ">
    <param   name= "Balance "   value= "0 ">
    <!--左右声道平衡,最左-9640,最右9640-->
    <param   name= "BaseURL "   value>
    <param   name= "BufferingTime "   value= "15 ">
    <!--缓冲时间-->
    <param   name= "CaptioningID "   value>
    <param   name= "ClickToPlay "   value= "-1 ">
    <param   name= "CursorType "   value= "0 ">
    <param   name= "CurrentPosition "   value= "0 ">
    <!--当前播放进度   -1   表示不变,0表示开头   单位是秒,比如10表示从第10秒处开始播放,值必须是-1.0或大于等于0-->
    <param   name= "CurrentMarker "   value= "0 ">
    <param   name= "DefaultFrame "   value>
    <param   name= "DisplayBackColor "   value= "0 ">
    <param   name= "DisplayForeColor "   value= "16777215 ">
    <param   name= "DisplayMode "   value= "0 ">
    <param   name= "DisplaySize "   value= "0 ">
    <!--视频1-50%,   0-100%,   2-200%,3-全屏   其它的值作0处理,小数则采用四舍五入然后按前的处理-->
    <param   name= "Enabled "   value= "-1 ">
    <param   name= "EnableContextMenu "   value= "-1 ">
    <!-是否用右键弹出菜单控制-->
    <param   name= "EnablePositionControls "   value= "-1 ">
    <param   name= "EnableFullScreenControls "   value= "-1 ">
    <param   name= "EnableTracker "   value= "-1 ">
    <!--是否允许拉动播放进度条到任意地方播放-->
    <param   name= "Filename "   value= "/blog/01.wma "   valuetype= "ref ">
    <!--播放的文件地址-->
    <param   name= "InvokeURLs "   value= "-1 ">
    <param   name= "Language "   value= "-1 ">
    <param   name= "Mute "   value= "0 ">
    <!--是否静音-->
    <param   name= "PlayCount "   value= "10 ">
    <!--重复播放次数,0为始终重复-->
    <param   name= "PreviewMode "   value= "-1 ">
    <param   name= "Rate "   value= "1 ">
    <!--播放速率控制,1为正常,允许小数-->
    <param   name= "SAMIStyle "   value>
    <!--SAMI样式-->
    <param   name= "SAMILang "   value>
    <!--SAMI语言-->
    <param   name= "SAMIFilename "   value>
    <!--字幕ID-->
    <param   name= "SelectionStart "   value= "-1 ">
    <param   name= "SelectionEnd "   value= "-1 ">
    <param   name= "SendOpenStateChangeEvents "   value= "-1 ">
    <param   name= "SendWarningEvents "   value= "-1 ">
    <param   name= "SendErrorEvents "   value= "-1 ">
    <param   name= "SendKeyboardEvents "   value= "0 ">
    <param   name= "SendMouseClickEvents "   value= "0 ">
    <param   name= "SendMouseMoveEvents "   value= "0 ">
    <param   name= "SendPlayStateChangeEvents "   value= "-1 ">
    <param   name= "ShowCaptioning "   value= "0 ">
    <!--是否显示字幕,为一块黑色,下面会有一大块黑色,一般不显示-->
    <param   name= "ShowControls "   value= "-1 ">
    <!--是否显示控制,比如播放,停止,暂停-->
    <param   name= "ShowAudioControls "   value= "-1 ">
    <!--是否显示音量控制-->
    <param   name= "ShowDisplay "   value= "0 ">
    <!--显示节目信息,比如版权等-->
    <param   name= "ShowGotoBar "   value= "0 ">
    <!--是否启用上下文菜单-->
    <param   name= "ShowPositionControls "   value= "-1 ">
    <!--是否显示往前往后及列表,如果显示一般也都是灰色不可控制-->
    <param   name= "ShowStatusBar "   value= "-1 ">
    <!--当前播放信息,显示是否正在播放,及总播放时间和当前播放到的时间-->
    <param   name= "ShowTracker "   value= "-1 ">
    <!--是否显示当前播放跟踪条,即当前的播放进度条-->
    <param   name= "TransparentAtStart "   value= "-1 ">
    <param   name= "VideoBorderWidth "   value= "0 ">
    <!--显示部的宽部,如果小于视频宽,则最小为视频宽,或者加大到指定值,并自动加大高度.此改变只改变四周的黑框大小,不改变视频大小-->
    <param   name= "VideoBorderColor "   value= "0 ">
    <!--显示黑色框的颜色,   为RGB值,比如ffff00为黄色-->
    <param   name= "VideoBorder3D "   value= "0 ">
    <param   name= "Volume "   value= "0 ">
    <!--音量大小,负值表示是当前音量的减值,值自动会取绝对值,最大为0,最小为-9640-->
    <param   name= "WindowlessVideo "   value= "0 ">
    <!--如果是0可以允许全屏,否则只能在窗口中查看-->
</object>

上面的这个播放器是老式的那种，6.4版本！新式播放器是在MediaPlayer9.0以后出现的，也就是说只有装了9.0或9.0以上的播放器才能正常使用的。

-------------------------------------------------------------------------------

下面是新式播放器代码，相对以前的来说要简单很多：
<object   id= "player "   height= "64 "   width= "260 "   classid= "CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6 ">
    <param   NAME= "AutoStart "   VALUE= "-1 ">
    <!--是否自动播放-->
    <param   NAME= "Balance "   VALUE= "0 ">
    <!--调整左右声道平衡,同上面旧播放器代码-->
    <param   name= "enabled "   value= "-1 ">
    <!--播放器是否可人为控制-->
    <param   NAME= "EnableContextMenu "   VALUE= "-1 ">
    <!--是否启用上下文菜单-->
    <param   NAME= "url "   value= "/blog/1.wma ">
    <!--播放的文件地址-->
    <param   NAME= "PlayCount "   VALUE= "1 ">
    <!--播放次数控制,为整数-->
    <param   name= "rate "   value= "1 ">
    <!--播放速率控制,1为正常,允许小数,1.0-2.0-->
    <param   name= "currentPosition "   value= "0 ">
    <!--控件设置:当前位置-->
    <param   name= "currentMarker "   value= "0 ">
    <!--控件设置:当前标记-->
    <param   name= "defaultFrame "   value= " ">
    <!--显示默认框架-->
    <param   name= "invokeURLs "   value= "0 ">
    <!--脚本命令设置:是否调用URL-->
    <param   name= "baseURL "   value= " ">
    <!--脚本命令设置:被调用的URL-->
    <param   name= "stretchToFit "   value= "0 ">
    <!--是否按比例伸展-->
    <param   name= "volume "   value= "50 ">
    <!--默认声音大小0%-100%,50则为50%-->
    <param   name= "mute "   value= "0 ">
    <!--是否静音-->
    <param   name= "uiMode "   value= "mini ">
    <!--播放器显示模式:Full显示全部;mini最简化;None不显示播放控制,只显示视频窗口;invisible全部不显示-->
    <param   name= "windowlessVideo "   value= "0 ">
    <!--如果是0可以允许全屏,否则只能在窗口中查看-->
    <param   name= "fullScreen "   value= "0 ">
    <!--开始播放是否自动全屏-->
    <param   name= "enableErrorDialogs "   value= "-1 ">
    <!--是否启用错误提示报告-->
    <param   name= "SAMIStyle "   value>
    <!--SAMI样式-->
    <param   name= "SAMILang "   value>
    <!--SAMI语言-->
    <param   name= "SAMIFilename "   value>
    <!--字幕ID-->
</object>