十秒倒计时

#include 
   
   
    
      
#include "./delay/delay.h"  
  
#define TIMEPORT P0  
  
sbit bit_select = P2^0;  
sbit seg_select = P2^1;  
sbit beep = P2^2;  
  
code unsigned char timedata[10] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};  
code unsigned char bitdata[8] = {0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};  
unsigned disdata[8];  
  
unsigned char ms = 1;  
unsigned char sec = 10;  
unsigned char min = 0;  
  
void timer0_init();  
void timer1_init();  
void display();  
void change_time();  
  
void main()  
{  
    unsigned char i;  
    unsigned char cont;  
    timer0_init();  
    timer1_init();  
      
    while(1)  
    {  
        for(cont = 9; cont > 0; cont--)  
        {  
            if(cont == sec && 99 == ms)  
            {  
                for(i = 0; i < 200; i++)  
                {  
                    beep = ~beep;  
                    delay_us(100);  
                }  
            }  
        }  
          
        if(0 == sec)  
        {  
            for(i = 0; i < 200; i++)  
            {  
                beep = ~beep;  
                delay_us(200);  
            }  
        }  
    }  
}  
  
/* 
=================== 
功能：初始化中断0 
=================== 
*/  
void timer0_init()  
{  
    EA = 1;  
    TMOD |= 0x01;  
    TH0 = (65536 - 1000) / 256;  
    TL0 = (65536 - 1000) % 256;  
    ET0 = 1;  
    TR0 = 1;  
}  
  
/* 
=================== 
功能：初始化中断1 
=================== 
*/  
void timer1_init()  
{  
    EA = 1;  
    TMOD |= 0x10;  
    TH1 = (65536 - 2000) / 256;  
    TL1 = (65536 - 2000) % 256;  
    ET1 = 1;  
    TR1 = 1;  
}  
  
/* 
========================== 
功能：中断1服务函数，显示 
========================== 
*/  
void timer1_isr() interrupt 3  
{  
    TH1 = (65536 - 2000) / 256;  
    TL1 = (65536 - 2000) % 256;  
  
    display();      
}  
  
/* 
========================== 
功能：中断0服务函数，计数 
========================== 
*/  
void timer0_isr() interrupt 1  
{  
    static unsigned char i = 0;  
      
    TH0 = (65536 - 1000) / 256;  
    TL0 = (65536 - 1000) % 256;  
  
    i++;  
      
    if(10 == i)  
    {  
        i = 0;  
        ms--;  
  
        if(0 == ms)  
        {  
            ms = 99;  
            sec--;  
          
            if(0 == sec)  
            {  
                sec = 0;  
                ms = 0;  
                TR0 = 0;  
            }  
        }  
    }  
  
    change_time();    //修改显示时间  
}  
  
/* 
====================== 
功能：修改时间显示值 
====================== 
*/  
void change_time()  
{  
    disdata[0] = timedata[min / 10];  
    disdata[1] = timedata[min % 10];  
    disdata[2] = 0x40;  
    disdata[3] = timedata[sec / 10];  
    disdata[4] = timedata[sec % 10];  
    disdata[5] = 0x40;  
    disdata[6] = timedata[ms / 10];  
    disdata[7] = timedata[ms % 10];    
}  
  
/* 
========================== 
功能：动态扫描，显示数据 
========================== 
*/  
void display()  
{  
    static unsigned char i = 0;  
      
    TIMEPORT = 0x00;            //清空数据，防止重影  
    seg_select = 1;  
    seg_select = 0;  
  
    TIMEPORT = 0xff;            //清空数据，防止重影  
    bit_select = 1;  
    bit_select = 0;  
  
    TIMEPORT = disdata[i];      //取出显示值  
    seg_select = 1;  
    seg_select = 0;  
  
    TIMEPORT = bitdata[i];      //取出位码  
    bit_select = 1;  
    bit_select = 0;   
      
    i++;  
    if(8 == i)  
    {  
        i = 0;  
    }  
}