一、下载gpsr协议源码,在~/ns-allinone-2.35/ns-2.35下解压,得到gpsr文件夹。
源码地址:点击打开链接
7个为协议实现文件:
gpsr_packet.h : definition of packets of different type used by this implementaion
gpsr_neighbor.h : definition of the neighbor list of each node used by this gpsr implementation including the planaring procedure (both GG and RNG)
gpsr_neighbor.cc : the implementation of the neighbor list class
gpsr.h : the definition of functions of GPSR routing agent of this implementation
gpsr.cc : the implementation of the GPSR routing agent
gpsr_sinklist.h: definition used for scenarios with multiple sinks
gpsr_sinklist.cc: implementation of gpsr_sinklist.cc
以上4个文件为仿真所需文件
gpsr.tcl : the node and agent creation functions used by simultion configuration in wireless-gpsr.tclwireless-gpsr.tcl : the simulation configuration
grid-deploy10x10.tcl : 100 nodes in a 200x200 meter area
cbr100.tcl : node 99 sends cbr traffic on UDP to node 0
二、修改packet.h
进入~/ns-allinone-2.35/ns-2.35/common文件夹, 打开packet.h文件,增加一行:
static const packet_t PT_GPSR = 73
关键代码如图:
- static const packet_t PT_GPSR = 73;
- // insert new packet types here
- static packet_t PT_NTYPE = 74; // This MUST be the LAST one
三、修改trace/cmu-trace.cc
进入~/ns-allinone-2.35/ns-2.35/trace,打开cmu-trace.cc文件。
在65行左右增加一行:
#include <gpsr/gpsr_packet.h>
关键代码如图:
- #include <mdart/mdart_function.h>
- #include <gpsr/gpsr_packet.h>
- #include <cmu-trace.h>
在void CMUTrace::format(Packet *p, const char *why){}中第1460行左右增加2行:
case PT_GPSR:
break;
关键代码如图:
- case PT_PING:
- break;
- case PT_GPSR:
- break;
- default:
四、修改priqueue.cc
进入~/ns-allinone-2.35/ns-2.35/queue文件夹, 打开priqueue.cc文件。
在void PriQueue::rece(Packet *p, Handler *h){}中第95行附近增加一行:
case PT_GPSR:
关键代码如图:
- case PT_AOMDV:
- case PT_GPSR:
- case PT_MDART:
五、修改ns-packet.tcl
在~/ns-allinone-2.35/ns-2.35/tcl/lib文件夹, 打开ns-packet.tcl文件。
在set protolist{}中174行附近加入一行
GPSR
关键代码如图:
- Diffusion # diffusion/diffusion.cc
- GPSR
- IMEP # Internet MANET Encapsulation Protocol, for ad-hoc networks
六、修改Makefile
在~/ns-allinone-2.35/ns-2.35,打开Makefile
在OBJ_CC = 的最后加入
gpsr/gpsr_neighbor.o gpsr/gpsr_sinklist.o gpsr/gpsr.o \
关键代码如图:
- wpan/p802_15_4trace.o wpan/p802_15_4transac.o \
- apps/pbc.o \
- gpsr/gpsr_neighbor.o gpsr/gpsr_sinklist.o gpsr/gpsr.o \
- $(OBJ_STL)
注意:每个【.o】后均有一个空格,包括最后一个【gpsr.o】
如果需要加入调试信息,则在CCOPT = -Wall 加上 -g, 如下:
CCOPT = -g -Wall
七、重新编译
- cd ~/ns-allinone-2.35/ns-2.35/common
- touch packet.cc
- cd ..
- make clean
- make
八、 运行仿真
进入~/ns-allinone-2.35/ns-2.35/gpsr文件夹,运行:ns wireless_gpsr.tcl