This paper tellls how to develop a water guage based on pressure sensor. The device is mainly used for underground water level measurement, conducting real-time measurement and display. Through the CAN bus,the data of water level measurement will be transmitted to the console for real-time monitoring and control.
System trial indicates that this device can accurately measure water level and basically fulfil the requirement of design. Due to time limitations,the system hasn't run for some time in physical environment. In the future,according to the actual operation condition, we will do some supplemental work to the hardware to perfect the hardware system and improve the performance.
This article has mainly designed a Water-level meter based on the pressure sensor, this equipment is mainly used in the mine shaft water level survey, the primary mission is carries on the real-time measurement and the display to the mine shaft water level, and will sound the bit data to transmit through the CAN bus gives the position computer, will carry on the real-time monitor and the check for the position computer to the system. The system tries 运行表明 the ming dynasty printed books equipment to be able accurately to examine the water level, basically conforms to the design requirement. As a result of the time limit, this system has not been able to try under the scene conditions to run period of time, from now on will be supposed to act according to the scene the run situation, partially will carry on the consummation to the hardware, will enhance the performance index.