ThreadPoolExecutor是JDK并发包提供的一个线程池服务，基于ThreadPoolExecutor可以很容易将一个Runnable接口的任务放入线程池中。
ThreadPoolExecutor的构建参数：
public ThreadPoolExecutor(int corePoolSize,
int maximumPoolSize,
long keepAliveTime,
TimeUnit unit,
BlockingQueue<Runnable> workQueue,
RejectedExecutionHandler handler) {
this(corePoolSize, maximumPoolSize, keepAliveTime, unit, workQueue,
Executors.defaultThreadFactory(), handler);
}corePoolSize： 核心线程数，会一直存活，即使没有任务，线程池也会维护线程的最少数量
maximumPoolSize： 线程池维护线程的最大数量
keepAliveTime： 线程池维护线程所允许的空闲时间，当线程空闲时间达到keepAliveTime，该线程会退出，直到线程数量等于corePoolSize。如果allowCoreThreadTimeout设置为true，则所有线程均会退出直到线程数量为0。
unit： 线程池维护线程所允许的空闲时间的单位、可选参数值为：TimeUnit中的几个静态属性：NANOSECONDS、MICROSECONDS、MILLISECONDS、SECONDS。
workQueue： 线程池所使用的缓冲队列，常用的是：java.util.concurrent.ArrayBlockingQueue、LinkedBlockingQueue、SynchronousQueue
handler： 线程池中的数量大于maximumPoolSize，对拒绝任务的处理策略，默认值ThreadPoolExecutor.AbortPolicy()。
2. execute方法JDK 实现
public void execute(Runnable command) {
if (command == null)
throw new NullPointerException();
if (poolSize >= corePoolSize || !addIfUnderCorePoolSize(command)) {
if (runState == RUNNING && workQueue.offer(command)) {
if (runState != RUNNING || poolSize == 0)
ensureQueuedTaskHandled(command);
}
else if (!addIfUnderMaximumPoolSize(command))
reject(command); // is shutdown or saturated
}
}一个任务通过 execute(Runnable)方法被添加到线程池，任务就是一个Runnable类型的对象，任务的执行方法就是run()方法，如果传入的为null，侧抛出NullPointerException。
如果当前线程数小于corePoolSize，调用addIfUnderCorePoolSize方法，addIfUnderCorePoolSize方法首先调用mainLock加锁，再次判断当前线程数小于corePoolSize并且线程池处于RUNNING状态，则调用addThread增加线程
addIfUnderCorePoolSize方法实现：
private boolean addIfUnderCorePoolSize(Runnable firstTask) {
Thread t = null;
final ReentrantLock mainLock = this.mainLock;
mainLock.lock();
try {
if (poolSize < corePoolSize && runState == RUNNING)
t = addThread(firstTask);
} finally {
mainLock.unlock();
}
if (t == null)
return false;
t.start();
return true;
}addThread方法实现：
private Thread addThread(Runnable firstTask) {
Worker w = new Worker(firstTask);
Thread t = threadFactory.newThread(w);
if (t != null) {
w.thread = t;
workers.add(w);
int nt = ++poolSize;
if (nt > largestPoolSize)
largestPoolSize = nt;
}
return t;
}ThreadFactory 接口默认实现DefaultThreadFactory
public Thread newThread(Runnable r) {
Thread t = new Thread(group, r,
namePrefix + threadNumber.getAndIncrement(),
0);
if (t.isDaemon())
t.setDaemon(false);
if (t.getPriority() != Thread.NORM_PRIORITY)
t.setPriority(Thread.NORM_PRIORITY);
return t;
}从addThread方法看得出，Worker对象包装了参数传入的任务，threadFactory新创建的线程包装了Worker对象，在执行新创建线程的run方法时，调用到了Worker对象的run方法.
Worker的run方法
public void run() {
try {
Runnable task = firstTask;
firstTask = null;
while (task != null || (task = getTask()) != null) {
runTask(task);
task = null;
}
} finally {
workerDone(this);
}
}从以上方法可以看出，Worker所在的线程启动后，首先执行创建其时传入的Runnable任务，执行完成后，循环调用getTask来获取新的任务，在没有任务的情况下，退出此线程。
getTask方法实现：
Runnable getTask() {
for (;;) {
try {
int state = runState;
if (state > SHUTDOWN)
return null;
Runnable r;
if (state == SHUTDOWN) // Help drain queue
r = workQueue.poll();
else if (poolSize > corePoolSize || allowCoreThreadTimeOut)
r = workQueue.poll(keepAliveTime, TimeUnit.NANOSECONDS);
else
r = workQueue.take();
if (r != null)
return r;
if (workerCanExit()) {
if (runState >= SHUTDOWN) // Wake up others
interruptIdleWorkers();
return null;
}
// Else retry
} catch (InterruptedException ie) {
// On interruption, re-check runState
}
}
}回到execute方法 ，execute 方法部分实现：
if (runState == RUNNING && workQueue.offer(command)) {
if (runState != RUNNING || poolSize == 0)
ensureQueuedTaskHandled(command);
}
else if (!addIfUnderMaximumPoolSize(command))
reject(command); // is shutdown or saturated如果当前线程池数量大于corePoolSize或addIfUnderCorePoolSize方法执行失败，则执行后续操作；如果线程池处于运行状态并且workQueue中成功加入任务，再次判断如果线程池的状态不为运行状态或当前线程池数为0，则调用ensureQueuedTaskHandled方法
ensureQueuedTaskHandled方法实现：
private void ensureQueuedTaskHandled(Runnable command) {
final ReentrantLock mainLock = this.mainLock;
mainLock.lock();
boolean reject = false;
Thread t = null;
try {
int state = runState;
if (state != RUNNING && workQueue.remove(command))
reject = true;
else if (state < STOP &&
poolSize < Math.max(corePoolSize, 1) &&
!workQueue.isEmpty())
t = addThread(null);
} finally {
mainLock.unlock();
}
if (reject)
reject(command);
else if (t != null)
t.start();
}reject方法实现:
void reject(Runnable command) {
handler.rejectedExecution(command, this);
}
再次回到execute方法，
if (runState == RUNNING && workQueue.offer(command)) {
if (runState != RUNNING || poolSize == 0)
ensureQueuedTaskHandled(command);
}
else if (!addIfUnderMaximumPoolSize(command))
reject(command); // is shutdown or saturated
private boolean addIfUnderMaximumPoolSize(Runnable firstTask) {
Thread t = null;
final ReentrantLock mainLock = this.mainLock;
mainLock.lock();
try {
if (poolSize < maximumPoolSize && runState == RUNNING)
t = addThread(firstTask);
} finally {
mainLock.unlock();
}
if (t == null)
return false;
t.start();
return true;
}3. 添加任务处理流程
当一个任务通过execute(Runnable)方法欲添加到线程池时：
如果当前线程池中的数量小于corePoolSize，并线程池处于Running状态，创建并添加的任务。
如果当前线程池中的数量等于corePoolSize，并线程池处于Running状态，缓冲队列 workQueue未满，那么任务被放入缓冲队列、等待任务调度执行。
如果当前线程池中的数量大于corePoolSize，缓冲队列workQueue已满，并且线程池中的数量小于maximumPoolSize，新提交任务会创建新线程执行任务。
如果当前线程池中的数量大于corePoolSize，缓冲队列workQueue已满，并且线程池中的数量等于maximumPoolSize，新提交任务由Handler处理。
当线程池中的线程大于corePoolSize时，多余线程空闲时间超过keepAliveTime时，会关闭这部分线程。
4. RejectedExecutionHandler 默认有四个选择：
ThreadPoolExecutor.AbortPolicy() 当线程池中的数量等于最大线程数时、直接抛出抛出java.util.concurrent.RejectedExecutionException异常
public static class AbortPolicy implements RejectedExecutionHandler {
/**
* Creates an {@code AbortPolicy}.
*/
public AbortPolicy() { }
/**
* Always throws RejectedExecutionException.
*
* @param r the runnable task requested to be executed
* @param e the executor attempting to execute this task
* @throws RejectedExecutionException always.
*/
public void rejectedExecution(Runnable r, ThreadPoolExecutor e) {
throw new RejectedExecutionException("Task " + r.toString() +
" rejected from " +
e.toString());
}
}ThreadPoolExecutor.CallerRunsPolicy() 当线程池中的数量等于最大线程数时、重试执行当前的任务，交由调用者线程来执行任务
public static class CallerRunsPolicy implements RejectedExecutionHandler {
/**
* Creates a {@code CallerRunsPolicy}.
*/
public CallerRunsPolicy() { }
/**
* Executes task r in the caller's thread, unless the executor
* has been shut down, in which case the task is discarded.
*
* @param r the runnable task requested to be executed
* @param e the executor attempting to execute this task
*/
public void rejectedExecution(Runnable r, ThreadPoolExecutor e) {
if (!e.isShutdown()) {
r.run();
}
}
}ThreadPoolExecutor.DiscardOldestPolicy() 当线程池中的数量等于最大线程数时、抛弃线程池中最后一个要执行的任务，并执行新传入的任务
public static class DiscardOldestPolicy implements RejectedExecutionHandler {
/**
* Creates a {@code DiscardOldestPolicy} for the given executor.
*/
public DiscardOldestPolicy() { }
/**
* Obtains and ignores the next task that the executor
* would otherwise execute, if one is immediately available,
* and then retries execution of task r, unless the executor
* is shut down, in which case task r is instead discarded.
*
* @param r the runnable task requested to be executed
* @param e the executor attempting to execute this task
*/
public void rejectedExecution(Runnable r, ThreadPoolExecutor e) {
if (!e.isShutdown()) {
e.getQueue().poll();
e.execute(r);
}
}
} public static class DiscardPolicy implements RejectedExecutionHandler {
/**
* Creates a {@code DiscardPolicy}.
*/
public DiscardPolicy() { }
/**
* Does nothing, which has the effect of discarding task r.
*
* @param r the runnable task requested to be executed
* @param e the executor attempting to execute this task
*/
public void rejectedExecution(Runnable r, ThreadPoolExecutor e) {
}
}
扫一扫
1749
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
